Traxxas Slash 4X4 RC Truck, Parts & Upgrades
Traxxas Slash 4x4 Is Built For Performance
The Traxxas Slash 4×4 is built for a streamlined performance through dirt, mud, snow or on concrete. Each is ready to race and also works well with upgrades. With the painted and decaled body, the Slash will look great while tearing up the road. Each is fully assembled and ready with pre-glued tires so that you can get started with the races once the vehicle arrives at your home.
Each Traxxas Slash uses TQi 2.4GHz for an excellent range and steady radio communication. The TQi transmitter included with the Slash 4×4 Ultimateconnects with Androids and Apple products including iPads and iPhones. Pull up a dashboard on your smart device to view speed, RPM, and motor temperature. Sealed on-board electronics ensure that no water will get into your servo or receiver.
Our Short Course Truck Recommendations
Each Slash 4×4 VXL truck comes with the Traxxas Stability Management which will help you navigate slippery courses in any weather condition. Your truck will rear back onto the track if it slips out of control and keep going. Have faith that you can finish the next race while keeping an eye on the rest of the pack. Experiment with various batteries to ensure that you maintain adequate power for your race track.
Traxxas Slash 4x4 VXL
Are you ready for the power of a brushless motor? Try out the Traxxas Slash 4×4 VXL Brushless RTR Short Course RC Truck w/TSM. This model is available in several race replica body styles, as well as the White Fox Racing Edition, which makes for a sleek design. You will tear up the road with these aesthetics.
The Traxxas Slash 4×4 VXL Brushless RTR Truck LIPO COMBO PACKAGE comes with a LiPo battery and charger. You get an extended runtime, which is great for when you have longer racecourses or extra time to bash at the skate park. Try our different battery packs if you want to increase your speed, or adjust your oil in your shocks to suit your driving style or racecourse.
How The Traxxas Slash 4×4 Sets The Standard
The Traxxas Slash VXL is built for the short course. When you need a car that handles twists and turns at a rapid speed, then this truck is the right one for you. You get top-notch support in the truck’s structure and ample power for the road. The chassis design is built for speed and to navigate obstacles more easily.
You can go more than sixty miles per hour with the Velineon brushless power motors. The best part is that the motor is low-maintenance. Harness your speed so that you can win that race. TSM-rated tires are built to handle the extra pressure so you won’t have to worry about replacing them too soon.
Find Your Traxxas Slash 4×4 Truck, Parts, and Upgrades At RC Superstore
RC Superstore wants to deliver the best models for your RC vehicle hobby. We love introducing beginners to the best cars and providing parts for those who want to upgrade or maintain their machines. We offer rewards points on purchases so that you can get the best deals on cars, boats, and parts.
Contact us today to find out what vehicle will suit your need for speed. RC Superstore’s customer service will go the extra mile to ensure that you are satisfied with your vehicle.
-
TRA6880
Traxxas Rear Differential Housings: Slash 4x4, Stampede 4x4, Rally, XO-1, Telluride
This is a set of Traxxas Rear Differential Housings for the Slash 4x4, Stampede 4x4, 1/10 Rally, Telluride, and the XO-1 carsIncludes: Two rear differential housing halves Replacement part forFord Fiesta ST RallyHoss 4X4 VXLRustler 4X4 VXLRustler...$4 -
TRA3643R
Traxxas TUBES Red 7075-T6 Aluminum 83mm Camber Links
These are the Traxxas TUBES Red-Anodized 7075-T6 Aluminum 83mm Camber Links. The TUBES are super light, yet stronger than titanium due to their design, making them an awesome upgrade for strength and good looks. An alumium adjustment wrench...$3495 -
GPM-SLA010/+25MM-B
GPM Blue Aluminum 25mm Extension Hubs w/12mm Hex for Slash & Stampede 4x4
These are the GPM Racing Blue Aluminum 25mm Extension Hubs with 12mm Hex for Traxxas 1/10 Slash 4x4, Stampede 4x4, Rustler 4x4, and other trucks listed below. This is a full set of four extensions. Made of 6061-T6 aluminum, these are a great option to...$1090 -
GPM-SLA102R-G-OR
GPM Green Aluminum Rear Shocks for 4x4 Slash Rustler Stampede
These are the GPM Racing Green Aluminum Rear Shocks for Traxxas 1/10 Slash 4x4, Rustler 4x4, and Stampede 4x4 trucks. Made of 6061-T6 aluminum and with a monster 4mm shock shaft, these shocks are built to last. They include three full spring sets (1...$2390 -
HRASLF311E
Hot Racing Front & Rear Sway Bar Set for Slash 4x4 & 1/10 Rally
This is the Hot Racing Front and Rear Sway Bar Set for Traxxas Slash 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles.FEATURES:Adjustable spring steel sway bar wire.YOU WILL RECEIVE:One Set of Front and rear Sway Bars WireTwo med chrome anti-roll bars.Four...$1388 -
HRALCF38X06
Hot Racing HD Blue Aluminum Motor Mount for LCG Slash 4x4
This is the Hot Racing Heavy-Duty Blue Aluminum Motor Mount with Over-Sized Bearings for the Traxxas Slash 4x4 Low-CG chassis trucks. This fits 1/10 Slash 4x4 Platinum, Ultimate, OBA trucks, Rally VXL, as well as 4x4 trucks with the low-CG conversion...$3388 -
RRP8717
Robinson Extra Hard 5mm Bore 17T Pinion 0.8 Mod (31.75P)
This is the Robinson Racing Extra Hard 17-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless,...$849 -
RRP8719
Robinson Extra Hard 5mm Bore 19T Pinion 0.8 Mod (31.75P)
This is the Robinson Racing Extra Hard 19-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless,...$849 -
TRA6846
Traxxas Linkage, steering (3x20mm turnbuckle) (1)/ rod ends (2)/ hollow balls (2)
This is the Traxxas Linkage, steering (3x20mm turnbuckle) (1)/ rod ends (2)/ hollow balls (2). This is Traxxas part number 6846Part Number: 6846 / TRA6846FitsSlash 2WD VXLSlash 2WD VXL (low CG)Slash 4x4 (low-CG)Slash 4x4 (standard chassis)Slash 4x4...$3 -
TRA3767
Traxxas Shock Caps & Bottoms: TMX .15, 2.5, Bandit, Rustler, Stampede
These are Shock Caps and Bottoms for Traxxas kits. Shock caps (2) and shock bottoms (2) for Traxxas Ultra Shocks Specifications:Diameter:Tops: 16mmBottoms: 13mm Replacement Part ForFord Fiesta ST RallyHoss 4X4 VXLNitro RustlerNitro SlashRustler 4X4...$3 -
GPM-RUS4102R/L-BK-OR
GPM Aluminum Rear Adjustable Piggyback Shocks for 4x4 Slash Rustler Stampede (Black)
These are the GPM Racing Black Aluminum Adjustable 102mm Piggyback Rear Shocks for Traxxas Slash 4x4, Rustler 4x4, and Stampede 4x4 trucks. Made of 6061-T6 aluminum, with a beefy 4mm steel shock shaft, these are a great upgrade for bashers and show...$3390 -
GPM-SLA021-BK
GPM Black Aluminum Front Steering Blocks for 4x4 Slash Rustler Stampede Rally
These are the GPM Racing Black Aluminum Front Steering Blocks for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, Rally, and Telluride vehicles. These are made of 6061-T6 aluminum and anodized for a beautiful finish.These are an upgraded replacement...$2390 -
GPM-SLA025TSH-G
GPM Green Aluminum Adjustable 25T Servo Horn for 4x4 Slash Stampede Rustler Rally
This is the GPM Racing Green Aluminum Adjustable 25T Spline Locking Servo Horn for Traxxas 1/10 Slash 4x4, Stampede 4x4, Rustler 4x4, and 1/10 Rally vehicles. Made of 6061-T6 aluminum, these are strong and look great!Installation notes: The included...$790 -
GPM-SLA021-GS
GPM Gunmetal Aluminum Front Steering Blocks for 4x4 Slash Rustler Stampede Rally
These are the GPM Gunmetal Aluminum Front Steering Blocks for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, Rally, and Telluride vehicles. These are made of 6061-T6 aluminum and anodized for a beautiful finish.These are an upgraded replacement for...$2390 -
GPM-SSLA1280FHA-GS
GPM Gunmetal Stainless Steel & Aluminum Front CVD Driveshaft Set w/Hex for 4x4 Slash Rustler Stampede Rally
This is the GPM Racing Gunmetal Stainless Steel and Aluminum Front CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These feature stainless steel axles and CVD joints, with the...$3690 -
GPM-SLA102R-OR-OR
GPM Orange Aluminum Rear Shocks for 4x4 Slash Rustler Stampede
These are the GPM Racing Orange Aluminum Rear Shocks for Traxxas 1/10 Slash 4x4, Rustler 4x4, and Stampede 4x4 trucks. Made of 6061-T6 aluminum and with a monster 4mm shock shaft, these shocks are built to last. They include three full spring sets (1...$2390 -
HRAWH17HT01
Hot Racing 12mm to 17mm Hex Hub Adapters w/10mm Offset for Slash 4x4, Stampede 4x4, Telluride
This is the Hot Racing 12mm to 17mm Hex Hub Adapters with 10mm Offset for Traxxas Slash 4x4, Stampede 4x4, Telluride, Associated ProLite 4x4, and Losi TEN-T vehicles.These adapters are compatible with many 1/10th scale vehicles with factory 12mm hex hubs...$2888 -
MIP18150
MIP X-Duty Front CVD Kit for Stampede 4x4, Slash 4x4, Rally
This is the MIP X-Duty Front CVD Kit for Traxxas 1/10 Stampede 4x4, Slash 4x4, and Rally vehicles. This will fit XL-5 and VXL versions of all of these. This kit replaces MIP 11110.Includes- 2 - MIP Confetti Sticker, 2.185 x .65 Black- 1 - MIP Lube &...$4599 -
RRP8715
Robinson Extra Hard 5mm Bore 15T Pinion 0.8 Mod (31.75P)
This is the Robinson Racing Extra Hard 15-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless,...$849 -
RRP8713
Robinson Steel 13T Pinion - 5mm Bore 0.8 Mod (31.75P)
This is the Robinson Racing Extra Hard Steel 13-Tooth 0.8 Mod Pinion Gear with 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless, and Summit...$849 -
TRA9917
Traxxas Medium RC Car/Truck Duffle Bag
This is the Traxxas Medium RC Car/Truck Duffle Bag Features Perfect for 1/10 and 1/8 Scale Models Thick, Weather-Resistant Nylon Fabric Heavy Duty Zippers and Stitching Large Outer Pockets for Tools, Parts, and Chargers Reinforced Carry Handles Padded...$11995 -
TRA7460A
Traxxas Motor Mount for Slash 4x4 LCG & Rustler 4x4
This is the Traxxas Assembled Motor Mount with 3x6 flat-head machine screws and a 3.0mm lock nut. This is used in the 1/10 Slash 4x4 trucks with the LCG chassis, Rustler 4x4, and 1/10 Fiesta Rally vehicles. Accessory Part For1/10 Ford Fiesta ST...$6 -
TRA3354R
Traxxas Velineon 3500 VXL Brushless Motor Endbell Cover
This is the Traxxas Velineon 3500 VXL Brushless Motor Endbell Cover. This is the standard replacement for the 1/10 VXL brushless motor. If your original is lost or damaged, replace it to help protect the motor and wiring from damage. Stock...$3 -
TRA6872
Traxxas Wheels, SCT Split-Spoke, satin chrome, black beadlock style, dual profile (2.2' outer, 3.0' inner) (4WD front/rear, 2WD rear only) (2)
This is the Traxxas Wheels, SCT Split-Spoke, satin chrome, black beadlock style, dual profile (2.2' outer, 3.0' inner) (4WD front/rear, 2WD rear only) (2). This is Traxxas part number 6872Part Number: 6872 / TRA6872FitsNitro SlashSlash 2WDSlash 2WD Ford...$795 -
GPM-RUS4087F/L-BK-OR
GPM Aluminum Front Adjustable Piggyback Shocks for 4x4 Slash Rustler Stampede (Black)
These are the GPM Racing Black Aluminum Adjustable 87mm Front Piggyback Shocks for Traxxas Slash 4x4, Rustler 4x4, and Stampede 4x4 trucks. Made of 6061-T6 aluminum, with a beefy 4mm steel shock shaft, these are a great upgrade for bashers and show...$3390 -
GPM-RUS4087F-R-OR
GPM Aluminum Front Adjustable Shocks for 4x4 Slash Rustler Stampede (Red)
These are the GPM Racing Red Aluminum Adjustable 87mm Front Shocks for Traxxas Slash 4x4, Rustler 4x4, and Stampede 4x4 trucks. Made of 6061-T6 aluminum, with a beefy 4mm steel shock shaft, these are a great upgrade for bashers and show trucks alike. ...$2390 -
GPM-SLA018FANLCG-BK
GPM Black Aluminum Motor Heatsink Fan for Slash 4x4 LCG, Stampede, Rustler
This is the GPM Racing Black Aluminum Motor Heatsink Fan for Traxxas Slash 4x4 VXL trucks with the low-CG chassis, Stampede 4x4 VXL, and Rustler 4x4 VXL trucks. These are a great addition to help keep your motor cool when pushing hard.Accessory Part...$2390 -
GPM-SLA201F/RN-BK
GPM Black Aluminum Rear Body Mount Posts for Slash 4x4 Fr/Rr & Stampede 4x4 Rear
This is the GPM Racing Black Aluminum Rear Body Mount Post for Traxxas 1/10 Slash 4x4 (front or rear) and Stampede 4x4 (rear) trucks. Made of 6061-T6 aluminum with an anodized finish, these are durable and look great!These can be used in place of the...$1990 -
GPM-SLA054-B
GPM Blue Front Turnbuckle Camber Link for 4x4 Slash Rustler Stampede
This is the GPM Racing Blue Front Turnbuckle Camber Links for Traxxas 1/10 Slash 4x4 VXL, Rustler 4x4 VXL, Stampede 4x4 VXL, and Jato 3.3 trucks. These feature aluminum rod ends with a steel turnbuckle link for adjustability and strength.These are...$1990 -
GPM-SLA087F-OR-OR
GPM Orange Aluminum Front Shocks for 4x4 Slash Rustler Stampede
These are the GPM Racing Orange Aluminum Front Shocks for Traxxas 1/10 Slash 4x4, Rustler 4x4, and Stampede 4x4 trucks. Made of 6061-T6 aluminum and with a monster 4mm shock shaft, these shocks are built to last. They include three full spring sets (1...$2390 -
HRATRX15EP
Hot Racing HD Aluminum Slipper Plate & Hub for Stampede, Slash, Rustler, Bandit, Jato
This is the Hot Racing HD CNC Machined Hard Anodized Aluminum Slipper Plate and Hub for the 1/10 Traxxas Bandit, Jato 3.3, Rally*, Rustler, Slash 2WD, Slash 4X4*, Stampede 2WD, and Stampede 4X4*. This item is a replacement for Traxxas 5556.*For high...$1488 -
RRP8711
Robinson Steel 11T Pinion - 5mm Bore 0.8 Mod (31.75P)
This is the Robinson Racing Extra Hard Steel 11-Tooth 0.8 Mod Pinion Gear with 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless, and Summit...$849 -
TRA2591
Traxxas 3x23mm Buttonhead Hex Machine Screws (6)
These are the Traxxas 3x23mm Buttonhead Hex Machine Screws. Each package includes six screws.Replacement part forBandit VXLDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0Ford F-150 RaptorFord Fiesta ST RallyHoss 4X4 VXLRustler 4X4...$250 -
TRA5353
Traxxas Blue Anodized Wheel Nuts,17mm (4): Revo, T-Maxx 3.3, E-Maxx Brushless
This is a set of four Traxxas Blue Aluminum 17mm Splined Wheel Nuts for the vehicles using the 17mm wheel hubs. Some of the vehicles are the Revo 3.3, E-Revo Brushless, T-Maxx 3.3, E-Maxx Brushless, Slayer Pro, Summit, and more. FEATURES: Aluminum...$10 -
TRA2554
Traxxas Engine Backplate Screws (6): TRX 2.5, 2.5R, 3.3
These are 3x5mm Backplate screws for the Traxxas 2.5, 2.5R, and 3.3 engines. 3x6 mm cap-head machine screws with hex drive heads. Features: Black steel construction Includes: Six black steel cap head screws Specifications:Length: 5mmDiameter:...$250 -
TRA6893
Traxxas Input shaft (slipper shaft)/ bearing adapter (1)/pin (1)
This is the Traxxas Input shaft (slipper shaft)/ bearing adapter (1)/pin (1). This is Traxxas part number 6893Part Number: 6893 / TRA6893Fits1/10 RallySlash 4x4 (low-CG)Slash 4x4 (standard chassis)Slash 4x4 PlatinumSlash 4x4 UltimateStampede 4x4...$650 -
TRA6860R
Traxxas Motor mount, 6061-T6 aluminum (blue-anodized)
This is the Traxxas Motor mount, 6061-T6 aluminum (blue-anodized). The aluminum motor mount is precision-machined from solid 6061-T6 alloy for extra rigidity and total power transfer in high-power brushless applications. The brilliant anodized finish...$3495 -
TRA5871R
Traxxas S1 Slash Tread Racing Tires (2): Slash & Slash 4x4
This is the Traxxas S1 Slash Tread Racing Tires (2): Slash & Slash 4x4. Features Race-proven, soft-compound rubber improves traction and cornering grip Realistic Traxxas Short Course tread pattern Performance tuned foam inserts...$1895 -
TRA3644R
Traxxas TUBES Red 7075-T6 Aluminum 73mm Camber Links
These are the Traxxas TUBES Red-Anodized 7075-T6 Aluminum 73mm Camber Links. The TUBES are super light, yet stronger than titanium due to their design, making them an awesome upgrade for strength and good looks. An alumium adjustment wrench...$3295 -
GPM-SLA201F/RN-R
GPM Aluminum Rear Body Mount Posts for Slash 4x4 Fr/Rr & Stampede 4x4 Rear (Red)
This is the GPM Racing Red Aluminum Rear Body Mount Post for Traxxas 1/10 Slash 4x4 (front or rear) and Stampede 4x4 (rear) trucks. Made of 6061-T6 aluminum with an anodized finish, these are durable and look great!These can be used in place of the...$1990