Traxxas Slash 4X4 RC Truck, Parts & Upgrades
Traxxas Slash 4x4 Is Built For Performance
The Traxxas Slash 4×4 is built for a streamlined performance through dirt, mud, snow or on concrete. Each is ready to race and also works well with upgrades. With the painted and decaled body, the Slash will look great while tearing up the road. Each is fully assembled and ready with pre-glued tires so that you can get started with the races once the vehicle arrives at your home.
Each Traxxas Slash uses TQi 2.4GHz for an excellent range and steady radio communication. The TQi transmitter included with the Slash 4×4 Ultimateconnects with Androids and Apple products including iPads and iPhones. Pull up a dashboard on your smart device to view speed, RPM, and motor temperature. Sealed on-board electronics ensure that no water will get into your servo or receiver.
Our Short Course Truck Recommendations
Each Slash 4×4 VXL truck comes with the Traxxas Stability Management which will help you navigate slippery courses in any weather condition. Your truck will rear back onto the track if it slips out of control and keep going. Have faith that you can finish the next race while keeping an eye on the rest of the pack. Experiment with various batteries to ensure that you maintain adequate power for your race track.
Traxxas Slash 4x4 VXL
Are you ready for the power of a brushless motor? Try out the Traxxas Slash 4×4 VXL Brushless RTR Short Course RC Truck w/TSM. This model is available in several race replica body styles, as well as the White Fox Racing Edition, which makes for a sleek design. You will tear up the road with these aesthetics.
The Traxxas Slash 4×4 VXL Brushless RTR Truck LIPO COMBO PACKAGE comes with a LiPo battery and charger. You get an extended runtime, which is great for when you have longer racecourses or extra time to bash at the skate park. Try our different battery packs if you want to increase your speed, or adjust your oil in your shocks to suit your driving style or racecourse.
How The Traxxas Slash 4×4 Sets The Standard
The Traxxas Slash VXL is built for the short course. When you need a car that handles twists and turns at a rapid speed, then this truck is the right one for you. You get top-notch support in the truck’s structure and ample power for the road. The chassis design is built for speed and to navigate obstacles more easily.
You can go more than sixty miles per hour with the Velineon brushless power motors. The best part is that the motor is low-maintenance. Harness your speed so that you can win that race. TSM-rated tires are built to handle the extra pressure so you won’t have to worry about replacing them too soon.
Find Your Traxxas Slash 4×4 Truck, Parts, and Upgrades At RC Superstore
RC Superstore wants to deliver the best models for your RC vehicle hobby. We love introducing beginners to the best cars and providing parts for those who want to upgrade or maintain their machines. We offer rewards points on purchases so that you can get the best deals on cars, boats, and parts.
Contact us today to find out what vehicle will suit your need for speed. RC Superstore’s customer service will go the extra mile to ensure that you are satisfied with your vehicle.
-
TRA6839XTraxxas Aluminum Front Shock Tower (Blue): Slash 4x4, Stampede 4x4, Rally, Telluride
This is the Traxxas Blue Aluminum Front Shock Tower for the Slash 4x4, Stampede 4x4, 1/10 Rally, and Telluride vehicles. Insist on the only aluminum shock towers that are by Traxxas, for Traxxas. These precision-machined towers add extra strength and...$2595 -
TRA9058XTraxxas Extreme Heavy-Duty Steel CV Driveshaft Rebuild Kit
This is the Traxxas Extreme Heavy-Duty Steel CV Driveshaft Rebuild Kit Rebuild your Traxxas extreme-duty steel CV driveshafts with this kit. Each kit contains the pins and hardware to rebuild one driveshaft. Fits: TRA9051X and TRA9052X$5 -
TRA9050-GRAYTraxxas Left & Right Rear Stub Axle Carriers (Gray) w/ Hardware: For use with #9080 Upgrade Kit
These are the Traxxas Rear Stub Axle Carriers for Upgrade Kit #9080, Gray, w/ Hardware (Left & Right) Replacement stub axle carriers for the Extreme Heavy Duty Upgrade Kit. Axle carriers are for use with the 9080 upgrade kit only and will not...$6 -
TRA9039-GRAYTraxxas Extreme Heavy Duty Rear Shock Tower (Gray): For use with #9080 Upgrade Kit
This is the Traxxas Extreme Heavy Duty Rear Shock Tower, Gray, Kit #9080 Replacement shock tower for the Extreme Heavy Duty Upgrade Kit. Shock tower is for use with the 9080 upgrade kit only and will not fit standard suspension. Replacement Part For:Ford...$6 -
TRA9038-GRAYTraxxas Extreme Heavy Duty Front Shock Tower (Gray): For use with #9080 Upgrade Kit
This is the Traxxas Extreme Heavy Duty Front Shock Tower, Gray, Kit #9080 Replacement shock tower for the Extreme Heavy Duty Upgrade Kit. Shock tower is for use with the 9080 upgrade kit only and will not fit standard suspension. Replacement Part...$6 -
TRA9037-GRAYTraxxas Left & Right Extreme Heavy Duty Steering Blocks (Gray) w/ Hardware: For use with #9080 Upgrade Kit
These are the Traxxas Extreme Heavy Duty Steering Blocks, Kit #9080, Gray, w/ Hardware - Left and RightReplacement steering blocks for the Extreme Heavy Duty Upgrade Kit. Steering blocks are for use with the 9080 upgrade kit only and will not fit...$6 -
TRA9032-GRAYTraxxas Left & Right Caster Blocks, C-Hubs (Gray) w/ Hardware: For use with #9080 Upgrade Kit
These are the Traxxas Caster Blocks, C-Hubs, Gray, Kit #9080 (Left & Right) (2) w/ HardwareReplacement caster blocks for the Extreme Heavy Duty Upgrade Kit. Caster blocks are for use with the 9080 upgrade kit only and will not fit standard suspension...$7 -
GPM-SLA029LCG-ORGPM Orange Aluminium Front/Rear Body Post Mount - 1pc set (For Slash 4x4 LOW-CG 68086-21 Version)
This is the GPM Orange Aluminium Front/Rear Body Post Mount - 1pc set (For Slash 4x4 LOW-CG 68086-21 Version) Includes3x8 Stainless steel button head screw - 2pcs3x10 Stainless steel button head screw - 2pcs Accessory Part ForSlash 4X4 LOW CG$499 -
GPM-SLA029LCG-RGPM Red Aluminium Front/Rear Body Post Mount - 1pc set (For Slash 4x4 LOW-CG 68086-21 Version)
This is the GPM Red Aluminium Front/Rear Body Post Mount - 1pc set (For Slash 4x4 LOW-CG 68086-21 Version) Includes3x8 Stainless steel button head screw - 2pcs3x10 Stainless steel button head screw - 2pcs Accessory Part ForSlash 4X4 LOW CG$499 -
GPM-SLA029LCG-GSGPM Gray Silver Aluminium Front/Rear Body Post Mount - 1pc set (For Slash 4x4 LOW-CG 68086-21 Version)
This is the GPM Gray Silver Aluminium Front/Rear Body Post Mount - 1pc set (For Slash 4x4 LOW-CG 68086-21 Version) Includes3x8 Stainless steel button head screw - 2pcs3x10 Stainless steel button head screw - 2pcs Accessory Part ForSlash 4X4 LOW CG$499 -
TRA3767XTraxxas Red Aluminum Ultra Shock Cap Set
This is the Traxxas aluminum (Red Anodized Shock Caps Shock caps, aluminum (Red-anodized) (4) (fits all Ultra Shocks)Aluminum shock caps are great way to boost the durability and style of any Traxxas vehicle equipped with Ultra Shocks. The machined caps...$14 -
TRA9069Traxxas Extreme Heavy Duty Wheel Hubs w/ Hardware: For use with #9080 Upgrade Kit
These are the Traxxas Extreme Heavy Duty Wheel Hubs w/ HardwareReplacement steel wheel hubs for the Extreme Heavy Duty Upgrade Kit. *Wheel hubs are for use with the 9080 upgrade kit only and will not fit standard axles.For use with #9080 upgrade kit and...$10 -
TRA9052Traxxas Extreme Heavy Duty Rear Driveshaft Assembly w/ Hardware: For use with #9080 Upgrade Kit
This is the Traxxas Extreme Heavy Duty Rear Driveshaft Assembly w/ HardwareReplacement rear driveshaft for the Extreme Heavy Duty Upgrade Kit. *Driveshafts are for use with the 9080 upgrade kit only and will not fit standard suspension parts.Fully...$14 -
TRA9051Traxxas Extreme Heavy Duty Front Driveshaft Assembly w/ Hardware: For use with #9080 Upgrade Kit
This is the Traxxas Extreme Heavy Duty Front Driveshaft Assembly w/ HardwareReplacement front driveshaft for the Extreme Heavy Duty Upgrade Kit. Driveshafts are for use with the 9080 upgrade kit only and will not fit standard suspension parts. Fully...$14 -
TRA2082ATraxxas Gear Set for Micro Waterproof Servo
This is the Traxxas Gear Set for Micro Waterproof ServoReplacement gear set for 2080A servo. Does not fit 2080 or 2080X servos.Replacement Part For These Models:1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit$4 -
TRA2080ATraxxas Waterproof Micro Servo
This is the Traxxas Waterproof Micro ServoThe 2080A waterproof micro servo gives you the freedom to drive in rain, mud, and snow.Replacement Part For These Models:1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit$2895 -
TRA9464Traxxas Heavy Duty Wheelie Bar Mount
This is the Traxxas Heavy Duty Wheelie Bar MountReplacement heavy-duty wheelie bar mount for the 9460-series extended wheelie bar.Replacement Part For These Models:Slash VXLStampede VXLAccessory Part For These Models:Bandit VXLDrag SlashRustler...$5 -
TRA1747TTraxxas Aluminum (4mm) Flanged and Serrated Nuts (Orange-Anodized) (4)
These are the Traxxas Flanged and Serrated Nuts, Aluminum (4mm) (Orange-Anodized) (4) Lightweight and great looking, these 4 mm anodized aluminum flanged lock nuts are the perfect finishing touch for your vehicle. The serrated flange and nylon locking...$750 -
TRA9057Traxxas Extreme Heavy Duty Differential Output Yoke Assembly (2): For use with #9080 Upgrade Kit
This is the Traxxas Differential output yoke assembly, extreme heavy duty (2) (left or right, front or rear) (assembled with external-splined half shaft) (for use with #9080 upgrade kit)Replacement differential output yokes for the 9080-series Extreme...$10 -
TRA9056Traxxas Extreme Heavy Duty Front Outer Stub Axle Assembly: For use with #9080 Upgrade Kit
This is the Traxxas Extreme Heavy Duty Front Outer Stub Axle Assembly (1). Left or Right - Assembled with internal-splined half shaft.Replacement front outer stub axle for the Extreme Heavy Duty Upgrade Kit. Stub axles are designed to fit the 9080...$8 -
TRA9055Traxxas Extreme Heavy Duty Rear Outer Stub Axle Assembly: For use with #9080 Upgrade Kit
This is the Traxxas Extreme Heavy Duty Rear Outer Stub Axle Assembly (1). Left or Right - Assembled with internal-splined half shaft.Replacement rear outer stub axle for the Extreme Heavy Duty Upgrade Kit. Stub axles are designed to fit the 9080 upgrade...$8 -
TRA9054Traxxas Extreme Heavy Duty Front Stub Axle, 6mm: For use with #9051R Steel CV Driveshafts
This is the Traxxas Extreme Heavy Duty Front Stub Axle, 6mmUpgrade your existing 9051X steel CV driveshafts to work with the Extreme Heavy Duty Upgrade Kit with these 6 mm stub axles. These upgraded axles are designed to fit the oversize bearings used in...$12 -
TRA9053Traxxas Extreme Heavy Duty Rear Stub Axle, 6mm: For use with #9052R Steel CV Driveshafts
This is the Traxxas Extreme Heavy Duty Rear Stub Axle, 6mmUpgrade your existing 9052X steel CV driveshafts to work with the Extreme Heavy Duty Upgrade Kit with these 6 mm stub axles. These upgraded axles are designed to fit the oversize bearings used in...$12 -
TRA9052RTraxxas Extreme Heavy Duty Rear Steel-Spline Constant-Velocity with 6mm Stub Axles (Complete Assembly): For use with #9080 Upgrade Kit
These are the Traxxas Extreme Heavy Duty Rear Steel-Spline Constant-Velocity with 6mm Stub Axles (Complete Assembly) (2)Extreme heavy-duty rear steel CV (constant velocity) driveshafts feature larger 6 mm stub axles to work specifically with the Extreme...$7995 -
TRA9051RTraxxas Extreme Heavy Duty Front Steel-Spline Constant-Velocity with 6mm Stub Axles (Complete Assembly): For use with #9080 Upgrade Kit
These are the Traxxas Extreme Heavy Duty Front Steel-Spline Constant-Velocity with 6mm Stub Axles (Complete Assembly): (2) Extreme heavy-duty front steel CV (constant velocity) driveshafts feature larger 6 mm stub axles to work specifically with the...$7995 -
TRA9043Traxxas Extreme Heavy Duty Screw Pins, 3x16mm (6): For use with #9080 Upgrade Kit
These are the Traxxas Extreme Heavy Duty Screw Pins, 3x16mm (6)Replacement 3x16 mm screw pins for the Extreme Heavy Duty Upgrade Kit. Screw pins are for use with the 9080 upgrade kit only and will not fit standard suspension. *For use with #9080 Upgrade...$4 -
TRA9016Traxxas Extreme Heavy Duty Front and Rear Body Mounts: For use with #9080 Upgrade Kit
This is the Traxxas Extreme Heavy Duty Body MountsReplacement body mounts for the Extreme Heavy Duty Upgrade Kit. *Body mounts are for use with the 9080 upgrade kit only and will not fit standard shock towers.Accessory Part For These Models:Hoss 4X4...$6 -
TRA9042XTraxxas Complete Front and Rear Extreme Heavy Duty (Hardened Steel) Suspension Pin Set w/Hardware: For use with #9080 Upgrade Kit
This is the Traxxas Complete Front and Rear Extreme Heavy Duty (Hardened Steel) Suspension Pin Set w/Hardware Made from hardened steel, the Extreme Heavy-Duty Suspension Pin Set upgrades the screw pins in the Extreme Heavy Duty Upgrade Kit and locks them...$15 -
TRA9042Traxxas Extreme Heavy Duty Complete Front and Rear Suspension Pin Set w/ Hardware: For use with #9080 Upgrade Kit
This is the Traxxas Extreme Heavy Duty Complete Front and Rear Suspension Pin Set w/ Hardware Replacement screw pins for the Extreme Heavy Duty Upgrade Kit. Screw pins are for use with the 9080 upgrade kit only and will not fit standard suspension. *For...$4 -
TRA9490XTraxxas Plate, Motor, Blue (4mm Aluminum ) w/ Hardware
This is the Traxxas Plate, Motor, Blue (4mm Aluminum ) w/ Hardware (2) 3x10mm CS with split and flat washer Made specifically for the Pro Series Magnum 272R transmission, these 4 mm aluminum motor plates are thicker than the stock plate for increased...$14 -
TRA9490RTraxxas Plate, Motor, Red (4mm Aluminum ) w/ Hardware
This is the Traxxas Plate, Motor, Red (4mm Aluminum ) w/ Hardware (2) 3x10mm CS with split and flat washer Made specifically for the Pro Series Magnum 272R transmission, these 4 mm aluminum motor plates are thicker than the stock plate for increased...$14 -
TRA9490GTraxxas Plate, Motor, Green (4mm Aluminum ) w/ Hardware
This is the Traxxas Plate, Motor, Green (4mm Aluminum ) w/ Hardware (2) 3x10mm CS with split and flat washer Made specifically for the Pro Series Magnum 272R transmission, these 4 mm aluminum motor plates are thicker than the stock plate for increased...$14 -
TRA9490PTraxxas Plate, Motor, Pink (4mm Aluminum ) w/ Hardware
This is the Traxxas Plate, Motor, Pink (4mm Aluminum ) w/ Hardware (2) 3x10mm CS with split and flat washer Made specifically for the Pro Series Magnum 272R transmission, these 4 mm aluminum motor plates are thicker than the stock plate for increased...$14 -
TRA9490ATraxxas Plate, Motor, Orange (4mm Aluminum ) w/ Hardware
This is the Traxxas Plate, Motor, Orange (4mm Aluminum ) w/ Hardware (2) 3x10mm CS with split and flat washer Made specifically for the Pro Series Magnum 272R transmission, these 4 mm aluminum motor plates are thicker than the stock plate for increased...$14 -
TRA9490Traxxas Plate, Motor, Blue (3.2mm) (Aluminum)
This is the Traxxas Plate, Motor, Blue (3.2mm) (Aluminum)Replacement Part For These Models:Bandit VXLDrag SlashRustler VXLSlash VXLStampede VXL$10 -
TRA9050XTraxxas Left & Right Rear Stub Axle Carriers (Blue) w/ Hardware: For use with #9080 Upgrade Kit
These are the Traxxas Rear Stub Axle Carriers for Upgrade Kit #9080, Blue, w/ Hardware (Left & Right) Replacement stub axle carriers for the Extreme Heavy Duty Upgrade Kit. Axle carriers are for use with the 9080 upgrade kit only and will not...$6 -
TRA9050TTraxxas Left & Right Rear Stub Axle Carriers (Orange) w/ Hardware: For use with #9080 Upgrade Kit
These are the Traxxas Rear Stub Axle Carriers for Upgrade Kit #9080, Orange, w/ Hardware (Left & Right) Replacement stub axle carriers for the Extreme Heavy Duty Upgrade Kit. Axle carriers are for use with the 9080 upgrade kit only and will not...$6 -
TRA9050RTraxxas Left & Right Rear Stub Axle Carriers (Red) w/ Hardware: For use with #9080 Upgrade Kit
These are the Traxxas Rear Stub Axle Carriers for Upgrade Kit #9080, Red, w/ Hardware (Left & Right) Replacement stub axle carriers for the Extreme Heavy Duty Upgrade Kit. Axle carriers are for use with the 9080 upgrade kit only and will not...$6 -
TRA9050GTraxxas Left & Right Rear Stub Axle Carriers (Green) w/ Hardware: For use with #9080 Upgrade Kit
These are the Traxxas Rear Stub Axle Carriers for Upgrade Kit #9080, Green, w/ Hardware (Left & Right) Replacement stub axle carriers for the Extreme Heavy Duty Upgrade Kit. Axle carriers are for use with the 9080 upgrade kit only and will not...$6 -
TRA9050Traxxas Left & Right Rear Stub Axle Carriers (Black) w/ Hardware: For use with #9080 Upgrade Kit
These are the Traxxas Rear Stub Axle Carriers for Upgrade Kit #9080, Black, w/ Hardware (Left & Right) Replacement stub axle carriers for the Extreme Heavy Duty Upgrade Kit. Axle carriers are for use with the 9080 upgrade kit only and will not...$6