Nitro Stampede

These are the Traxxas Spring Retainers for Traxxas Shocks. This set contains the spring retainers that hold the springs in place over the shock body and the piston heads that control the amount of oil flow in the shock cylinder. FEATURES:Constructed of...

This is a Traxxas Glow Plug Wire Lead for all Traxxas EZ-Start 1 and 2 equipped vehicles.  It fits the T-Maxx .15, 2.5, 3.3, Revo, Jato, 4-Tec, Rustler, Stampede and all other vehicles equiped with the EZ-Start system.  It...

This is the Traxxas Fuel Line  (2 ft) SpecificationsFuel line (610mm or 2ft)24" fuel line Replacement Part ForJatoNitro RustlerNitro SlashRevoSlayer Pro 4X4T-Maxx Accessory Part ForTRX 2.5RTRX 3.3TRX Pro .15

This is the Traxxas Speed Bit 3-Piece Metric Ball Hex Driver Set with 1/4" drive.  This set includes 2.0mm, 2.5mm, and 3.0mm ball end bits.  The 1/4" drive makes these perfect for use with powered screwdrivers, or with the standard Traxxas...

This is the Traxxas Speed Bit 2-Piece Metric Ball Hex Driver Set with 1/4" drive.  This set includes 2.0mm and 2.5mm ball end bits.  The 1/4" drive makes these perfect for use with powered screwdrivers, or with the standard Traxxas Speed Bit...

This is the Traxxas Speed Bit 4-Piece Metric Hex Driver Set with 1/4" drive.  This set includes straight tip 1.5mm, 2.0mm, 2.5mm and 3.0mm end bits.  The 1/4" drive makes these perfect for use with powered screwdrivers, or with the standard...

This is the Traxxas TQ 2.4GHz 3-Channel Micro Receiver for use with the TQ 2.4GHz transmitter. The TQ 2.4GHz micro receiver uses an integrated LINK button for fast and easy binding. A two-color LED indicates power-on and bind status for fool-proof...

This is a set of four Traxxas Blue-Anodized Aluminum 4mm Lock Nuts with a Flanged and Serrated surface. Lightweight and great looking, these 4 mm anodized aluminum flanged lock nuts are the perfect finishing touch for your vehicle. The serrated flange...

This is the Traxxas Receiver Switch Harness with Charge Jack for Traxxas Nitro vehicles like the T-Maxx 2.5 and 3.3, Nitro 4-Tec, Nitro Rustler, and Nitro Stampede.FitsNitro 4-TecNitro RustlerNitro SportNitro StampedeS-MaxxSportmaxxT-Maxx 2.5T-Maxx 2...

This is the Traxxas 4mm Nylon Locking Wheel Nuts (8) Set of eight 4 mm nylon locking nuts feature a serrated flange to keep them snug on the wheel during intense action FEATURES Steel serrated construction SPECSOutside diameter: 7mm Replacement Part...

This is a pair of Traxxas 5x8x2.5mm Blue Rubber Sealed Ball Bearings. These fit a large number of Traxxas 1/10 and 1/16 scale vehicles.Includes: (2) 5X8mm ball bearingsSpecificationsInside diameter: 5mmOutside diameter: 8mmWidth: 2.5mmReplacement part...

This is the spur gear (or main gear) for the Traxxas Nitro Rustler trucks. Includes:One 70 tooth gear Features:Tough nylon constructionDrilled for light weight Specs:Teeth-70Pitch-32 Requires:Nothing, this is a direct replacement part. Comments:This is...

This is the Long Temperature and Voltage Sensor for the Traxxas TQi system. To read voltage on electric vehicles, this must be used with the Traxxas part TRA6541 Power Tap. The temperature/voltage sensor plugs directly into your TQi receiver and power...

This is a package of replacement Traxxas 5x8mm Teflon Washers (20) for the Traxxas T-Maxx, Revo, Jato, and other vehicles. (use with ball bearings) FEATURES:Black teflon construction.Used on the axles and in the transmission. INCLUDES: Set of 20...

These are rubber cap diaphragms for Traxxas plastic shocks. These also work well with some Associated aluminum shocks. Replacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBIGFOOT No. 1 Officially Licensed ReplicaChevrolet...

This is the Replacement 72 Spur Gear for the Traxxas Nitro Rustler and Nitro T-Maxx Trucks. FEATURES:Black plastic, slipper clutch style spur gear. INCLUDES:One 72 tooth spur gear REQUIRES:The other parts of that make up the slipper clutch are:#TRA1994 -...

This is the GPM Racing Green Steel and Aluminum Rear CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Slash 2WD, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These feature steel axles and CVD joints, with the main shaft...

This is the Traxxas TQ 2.4GHz 2-Channel Transmitter.   (Transmitter Only) Stock replacement transmitter for many Traxxas vehicles.  1/16 E-Revo1/16 Slash 4WD1/16 Summit4-Tec 2.0 AWD ChassisBanditBIGFOOTBlastChevrolet Corvette...

This is the Traxxas TQ 2.4GHz 3-Channel Transmitter.   (Transmitter Only) Stock replacement transmitter for many Traxxas vehicles.    Includes (1) Traxxas TQ 2.4GHz 3-Channel Transmitter Requires (4) AA batteries

This is a set of Traxxas Stub Axle Pins.  These pins slide through the axle and keep the wheel hexes from spinning on the axle. Set of four stub axle pins Replacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBIGFOOT No...

This is the RPM Black Front Bulkhead for Traxxas 2WD trucks, including the Slash 2WD, Nitro Slash, Rustler, Nitro Rustler, Stampede 2WD, Skully, Craniac, Bigfoot, Nitro Stampede, and Bandit trucks and buggies.This part is a direct replacement for Traxxas...

This is the Traxxas Antenna Cap Set with Antenna Spool. The antenna spool is used for wrapping excess antenna wire before inserting it in the antenna tube to prevent wire from hanging out the end of the tube, preventing damaged antenna wires caused by...

This is the Traxxas Heat Shield Tubing for Fuel Line (2) Fiberblass heat shield tubing Replacement Part ForJatoNitro RustlerNitro SlashRevoSlayer Pro 4X4T-MaxxTRX 2.5RTRX 3.3

This is a Traxxas Front Bumper. This bumper fits many different vehicles, including the Stampede 2WD, Rustler, Bandit, and many nitro vehicles.Fits1/10 Monster Jam TrucksBandit VXLBandit XL-5CraniacNitro RustlerNitro SlashNitro SportNitro...

These are the Traxxas Hardened Steel Rear Driveshafts for the Traxxas 1/10 Scale Slash 4x4, Slash 2WD, Rally, and Stampede 4x4 vehicles. Traxxas Steel Constant Velocity Shafts offer the ultimate in torque handling and efficient power transfer. The outer...

This is pack of Traxxas DC Charger 5-Amp Fuses (2). These are replacements for use in the 2-amp and 4-amp DC 12-volt cigarette-lighter style quick chargers included with many of the Traxxas electric and nitro vehicles.Fits Traxxas charger model 2974,...

This is the Replacement Servo Saver with Adapters. The spring-loaded servo saver protects your steering servo by absorbing shocks that might otherwise cause internal gear damage. Replacement Part ForBandit VXLBanditFord F-150 RaptorFord F-150 RaptorNitro...

This is the Traxxas aluminum blue-anodized shock caps Aluminum shock caps are great way to boost the durability and style of any Traxxas vehicle equipped with Ultra Shocks. The machined caps fit precisely and hold tightly, run after run, jump after jump...

This is the Traxxas Stock replacement EZ-Start Motor for the EZ-Start (original) System. This motor is what turns the engine over in order to start it.  This is for the original EZ-Start system, which was used on vehicles...

This is the Traxxas 4-Cell AA Battery Holder with On/Off Switch for use to power the receiver and servos in nitro vehicles.FitsNitro 4-TecNitro RustlerNitro SlashNitro SportNitro StampedeS-MaxxSportmaxxT-Maxx 2.5T-Maxx 2.5RT-Maxx 3.3

This is the Traxxas 1200mAh NiMH 5-Cell 6-Volt Hump Pack Receiver Battery for Traxxas Nitro vehicles.  This high quality 5-cell hump pack uses proven nickel-metal hydride cells and is rated at 1200mAh.  Fully charged, it provides about 1 hour...