Jato 3.3

These are Traxxas 5mm Nylon Locknuts (8). Features: Chromed steel construction Nylon inserts Includes: Eight 5mm locknuts Specifications:Thickness: 4.95mm (.195")

This is the Traxxas Jato Low RPM Resonator Tuned Pipe This single-chamber Resonator aluminum tuned pipe is precision-engineered on the dyno to increase the low to mid-RPM power output of TRX Racing Engines. Resonator pipes feature R.O.A.R. legal stingers...

This is the replacement Starter Shaft for the T-MAXX 2.5 engine. FEATURES:Steel Construction INCLUDES:One shaft REQUIRES:Traxxas 2.5 T-MAXX engine SPECS:Length: 25.4 mm (1")Diameter: 18.2 mm (0.716") COMMENTS:If the oneway bearing is needed, use...

This is the replacement Recoil String for use with the Traxxas 2.5/2.5R recoil starters. FEATURES:Direct replacementNylon construction INCLUDES:One replacement recoil starter string REQUIRES:Remainder of recoil SPECS:Length:21.5"(546.10mm) COMMENTS:This...

This is a Traxxas Jato 2.5 and 3.3 Primary Shaft and One-Way Bearing.FEATURES:Metal ConstructionInstalls in gearbox behind the primary clutch assemblyINCLUDES:One Metal Primary ShaftOne One Way BearingOne Snap RingOne 5mm x 8mm x .5mm Washer

This is a set of Anti-Roll Bars and Linkages for use with the Traxxas Jato 3.3, TRAC83**. These are mounted onto the front and rear of the vehicle and help make the vehicle more responsive to steering inputs. FEATURES:Optional partSteel sway bar...

This is the replacement 2-Speed Gear Set for the Traxxas Jato 2.5 and 3.3 trucks.FEATURES: Steel and nylon construction, black in colorINCLUDES: 17 Tooth metal pinion gear.29 Tooth plastic spur.SPECS:    Height: 1/2" (12mm)Diameter: 1-1/4"...

This is the Rubber Plug and Charge Jack for the Traxxas Nitro Jato Stadium Truck. FEATURES:Rubber constructionBlack in color INCLUDES:One Rubber Transmission PlugOne Rubber Charge Jack Plug REQUIRES:Assembly onto Vehicle

This is a set of Traxxas Jato 2.5 and 3.3 Differential and Transmission Gaskets. FEATURES: Rubber constructionBlack and Blue in color INCLUDES: Two Transmission GasketsOne Differential GasketOne L-Shaped Foam Strip

This is the Differential Cover for the Traxxas Nitro Jato Stadium Truck. FEATURES:Nylon constructionBlack in color INCLUDES:One Differential Cover REQUIRES:Assembly onto Vehicle

This is a Traxxas Jato Differential Gear Set for the Jato 2.5 and 3.3 trucks.FEATURES:Nylon constructionBlack in colorINCLUDES: One Differential Gear 38TOne Differential Side CoverOne Differential GasketTwo Output Gear SealsFour 2.5mm x 8mm...

This is the Traxxas Anaconda 2.8" Front Tire set for use on the Jato 2.5 or 3.3 vehicle. FEATURES:Rubber Anaconda tiresSplit X-Pattern treadFoam inserts INCLUDES:Two Jato front Tires REQUIRES:Mounting to Wheels SPECS:Overall Diameter: 3.8in (97mm)Wheel...

These are glued Front All Star Chrome Wheels and Anaconda Tires w/Foam Inserts for the Traxxas Jato. FEATURES:Wheels are made of chrome coated plastic INCLUDES:(2) Pre-mounted Tires and Wheels REQUIRES:Installation SPECS:Outside Diameter: 4.1"...

This is a pair of the Traxxas 2.8" Rear Chrome All Star Wheels with Anaconda Tires and Foam Inserts  Anaconda performance street tires feature a specially formulated tire compound providing exceptional wear and sticky traction. Anaconda tires come...

This is the Throttle and Brake Linkage for the Traxxas Jato. FEATURES:Mounts to throttle servo and controls throttle and brake operation INCLUDES:Servo horn, two rod guides, brake spring, brake adjustment dial, two rods and throttle return...

This is the Input Shaft and Spacer for the Traxxas Nitro Jato Stadium Truck. FEATURES:Metal ConstructionBlack in color INCLUDES:One Input Shaft (Slipper Shaft)One Slipper Shaft Spacer REQUIRES:Assembly onto Vehicle

This is the GTR Shock Rebuild Kit for the Traxxas Jato. FEATURES: Blue and Grey in ColorRubber and Nylon Construction INCLUDES:Two Rubber DiaphragmsFour Shock PistonsTwo Shock EndsTwo Ball EndsTwo Rubber O-Rings REQUIRES:Installation into Shocks

This is a set of Traxxas Jato 2.5 and 3.3 Rear Suspension Tie Bars.  One is a 3-degree, and the other is a 5-degree tie bar.

This is a set of Left and Right Rear Stub Axle Carriers for the Traxxas Jato 2.5 and 3.3.

This is a set of Traxxas Jato 2.5 and 3.3 Suspension Down Stop Screws. All R/C off-road racers want as much ground clearance as possible, and that’s exactly what your Jato will get with these suspension down stop screws. You control your suspension’s...

This is a Traxxas Jato 2.5 and 3.3 Left or Right Driveshaft Assembly.  This transfers power from the gearbox to the wheel.  This will work on the left or right side.  This includes one complete driveshaft assembly with 3x12.5mm screw pin.

This is a Traxxas Jato 2.5 & 3.3 Wire Tuned Pipe Hanger.  This attaches to your tuned pipe and the chassis.

This is a set of Traxxas Jato 2.5 and 3.3 Servo Horns for JR, Hitec, Airtronics, KO, and Sanwa Servos.  This allows you to use servos other than the stock Traxxas servos in your Jato.

This is a Traxxas Servo Horn with Rod Ends and Hollow Balls for the Jato 2.5 and 3.3 trucks. FEATURES:Nylon and Metal constructionBlack in color INCLUDES:One 3mm x 30mm Threaded RodTwo 3mm Ball CupsTwo 3mm Hollow BallsOne Nylon Steering Servo Horn

This is a set of Steering Bellcrank Posts for the Traxxas Jato 2.5 and 3.3 trucks

This is a Traxxas Jato 2.5 and 3.3 Steering Drag Link and Shoulder Screws.

This is a Traxxas Jato 2.5 and 3.3 Aluminum Exhaust Header.  This is a stock replacement header.

This is a set of Traxxas Jato 2.5 and 3.3 Blue Aluminum Left and Right Front Wheel Spindles.  These are made of 7075 T-6 Aluminum.

This is a Traxxas Jato 2.5 and 3.3 Left and Right Front Wheel Spindle Set.

This is a set of Traxxas 25-Degree Left and Right Caster and Steering Blocks for the Jato 2.5 and 3.3 trucks.  This includes one left and right 25-degree caster block, and one left and right 25-degree steering block.

This is a Traxxas Jato 2.5 and 3.3 Stock Replacement Front Bumper. FEATURES:Nylon constructionBlack in color INCLUDES: One Front Bumper REQUIRES: Assembly onto vehicle

These are the Rear Left and Right Suspension Arms for the Traxxas Nitro Jato Stadium Truck. FEATURES:Nylon ConstructionBlack in Color INCLUDES:One Left Rear Suspension ArmOne Right Rear Suspension Arm REQUIRES:Assembly onto Vehicle

This is a set Traxxas Jato 2.5 and 3.3 30-degree Caster and Steering Blocks.  This includes one left and one right 30-degree caster block, as well as a left and right steering block.

This is a set of two (2) Traxxas Jato 2.5 and 3.3 Differential Output Yokes.  These include the set screw pins.

This is a Front & Rear Suspension Pin Set for the Traxxas Jato 2.5 and 3.3 trucks.

This is a set of two (2) Traxxas Jato 2.5 and 3.3 Rear GTR Shock Springs with the 1.4 Pink Weight Rating.

This is a set of two (2) Traxxas Jato 2.5 and 3.3 Front GTR Shock Springs with the 0.7 Yellow Weight Rating.

This is a set of Cylinder Head Gaskets for the Traxxas TRX 2.5 engine. FEATURES:Copper construction.Three different thickness allow you to taylor your compression. INCLUDES:One each of the following thickness of gaskets: 0.15", 0.25" & 0.35"...

This is a set of four Aluminum Front Wheel Spacers for the Traxxas Jato 2.5 and 3.3 trucks. Set of four steel wheel spacers for Jato Twin-Spoke wheels. Replacement Part ForJatoNitro Rustler

This is a set of six Traxxas 3mm x 10mm Shoulder Screws for the Jato 2.5 and 3.3 trucks.