Traxxas E-Maxx Parts List
The Traxxas E-Maxx takes RC monster truck thrashing to another level with its powerful motor system. Available with a 16.8V brushed, or a 22.2V brushless power system for use with up to 6S LiPo, the Traxxas E-Maxx trucks have the potential to deliver endless amounts of fun for kids and adults. The E-Maxx is built to sustain all kinds of terrain. Equipped with sturdy waterproof electronics, you can drive the Traxxas E-Maxx wherever you want! From water and snow to mud and dirt, this monster truck blazes through all conditions without slowing down. Even without any additional E-Maxx 4x4 upgrades, this truck's transmission is able to sustain over 2x more torque than original models!
Want to improve the performance of your truck even more? Shop our wide variety of Traxxas E-Maxx parts to find your desired upgrades. Whether you need replacement batteries, shock kits or new tires, RC Superstore has an extensive supply of Traxxas E-Maxx brushless upgrades! Put in your order today!
-
TRA3762ATraxxas 3762A XX-Long Grey Ultra Shocks (2)
This is a pair of the Traxxas XX-Long Ultra Shocks (part 3762A) for use on a wide variety of Traxxas vehicles, including the Bandit, Rustler, Stampede 2WD & 4x4, Slash, Hoss, T-Maxx, and more. Traxxas oil-filled Ultra Shocks utilize X-rings for a...$18 -
TRA3947X
Traxxas 17-Tooth 32P Machined Hardened Steel Pinion Gear w/Set Screw
This is the Traxxas 17-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear.Accessory Part For1/10 E-Revo BrushedE-MaxxSlash 4x4...$595 -
TRA5172A
Traxxas Split Spoke 3.8" Black Chrome Wheels w/17mm Splined Hexes
This is a pair of Traxxas Split Spoke 3.8" Black Chrome Wheels with 17mm Splined Hexes for use on T-Maxx, E-Maxx, Revo, E-Revo, and Summit trucks.Features 3.8" 5-split spoke wheels 17mm splined hex Includes: Two 3.8" 5-Split Spoke WheelsRequires:...$1095 -
TRA5161
Traxxas Suspension Screw Pin Set: T-Maxx 3.3 & E-Maxx
This is the Suspension Screw Pin Set for the Traxxas T-Maxx 3.3. FEATURES Steel construction Silver in color INCLUDESTwo 59mm screw pins.Four 73mm screw pins.Two 65mm screw pins. REQUIREST-Maxx 3.3$9 -
TRA3948X
Traxxas 18-Tooth 32P Machined Hardened Steel Pinion Gear w/Set Screw
This is the Traxxas 18-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear.Accessory Part For1/10 E-Revo BrushedE-MaxxSlash 4x4...$595 -
HRATRX15EPL06
Hot Racing Power Up Slipper Eliminator for Slash 4x4, Stampede 4x4, Revo, E-Revo, Summit, E-Maxx, T-Maxx
This is the Hot Racing Power Up Slipper Eliminator for Traxxas E-Maxx, E-Revo, Rally VXL, Revo 3.3, Slash 4X4, Slayer Pro 4X4, Stampede 4X4, 1/10 Summit, and T-Maxx 3.3.FEATURES:- Eliminates the transmission slipper assembly to transmit all power to...$1649 -
TRA2053
Traxxas Servo Gear Set for 2055 & 2056 Servos
This is the Traxxas Replacement Servo Gear Set for 2055 and 2056 Servos. This is Traxxas part number 2053.$4 -
TRA5145
Traxxas Screw Pins 4x15mm (6)
This is the Traxxas 4x15mm Screw Pin Set for the Revo and other vehicles. This includes six screw pins. Features: Metal Construction Black in Color Hex Head Design Includes: Six 4mm x 15mm Black Metal Screw Pins. Specifications:Length...$350 -
TRA2575
Traxxas Buttonhead Screws 3x6mm (6)
This is a package of six 3x6mm Traxxas Button Head Screws. Features: Steel construction Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a 3x6mm button head screw is required Includes: Six...$250 -
TRA3951X
Traxxas 21-Tooth 32P Machined Hardened Steel Pinion Gear w/Set Screw
This is the Traxxas 21-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear.Accessory Part For1/10 E-Revo BrushedE-MaxxSlash 4x4...$595 -
TRA5353R
Traxxas 17mm Splined Red Aluminum Wheel Hubs, Nuts & Screw Pins (4)
These are the Traxxas 17mm Splined Red Aluminum Wheel Hubs, Nuts, & Screw Pins for the 1/10 E-Revo, E-Maxx, Summit, T-Maxx, and Revo 3.3 trucks. These allow you to run wheels with a 17mm hex size.Features: Aluminum construction, red anodized in...$2195 -
TRA4933
Traxxas Pivot Balls & Pivot Ball Cap Bushings (4)
This is a set of 4 Traxxas Pivot Balls and Pivot Ball Cap Bushings. These fit the 1/10 E-Revo, 1/10 Summit, E-Maxx, T-Maxx, Revo 3.3, Slayer, and more!FeaturesReplaces stock pivot balls and pivot ball cap bushings.Pivot balls are made of steel, pivot...$6 -
TRA4935
Traxxas Satin Finish Bumper: T-Maxx & E-Maxx Trucks
This is a Traxxas Front and Rear Bumper Set for use with all versions of the Traxxas T-Maxx and E-Maxx trucks. These are stock replacements. Fits Traxxas T-Maxx .15, 2.5, 2.5R, 3.3 (both model 4908 & 4909), and...$6 -
TRA3950X
Traxxas 20-Tooth 32P Machined Hardened Steel Pinion Gear w/Set Screw
This is the Traxxas 20-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear. The heavy-duty 20-tooth (32-pitch) pinion gear is machined from...$595 -
TRA4933X
Traxxas Hard-Anodized 7075-T6 Aluminum Pivot Balls & Ball Cap Bushings (4)
This is a set of 4 Traxxas 7075-T6 Hard-Anodized Aluminum Pivot Balls and Pivot Ball Cap Bushings. These fit the 1/10 E-Revo, 1/10 Summit, E-Maxx, T-Maxx, Revo 3.3, Slayer, and more!These trick, hard-anodized 7075-T6 aluminum pivot balls are...$20 -
RPM81065
RPM Blue Front Bulkheads for T-Maxx & E-Maxx
This is the RPM Blue Front Bulkhead Set for the Traxxas T-Maxx .15, 2.5, 3.3, E-Maxx, and E-Maxx Brushless trucks. These are backed by RPM's industry-leading lifetime breakage warranty.Until now, the Traxxas T-Maxx and E-Maxx line of trucks has been...$1099 -
TRA3949X
Traxxas 19-Tooth 32P Machined Hardened Steel Pinion Gear w/Set Screw
This is the Traxxas 19-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear.Accessory Part For1/10 E-Revo BrushedE-MaxxSlash 4x4...$595 -
TRA5671
Traxxas Geode 3.8" Chrome Wheels w/17mm Splined Hex for use w/Sidewall Protectors
This is a pair of Traxxas Geode 3.8" Chrome Wheels with 17mm Splined Hex for use with Sidewall Protectors.FeaturesNylon constructionBeadlock appearance style, for use with sidewall protectorsChrome in color ...$1195 -
TRA5353A
Traxxas 17mm Splined Green Aluminum Wheel Nuts (4)
Traxxas Splined 17mm Wheel Nuts (green-anodized) (4) This set of four 17 mm blue aluminum wheel nuts is beautiful anodized for eye-catching looks with Traxxas-tough durability. Replacement part ForJato 4X4 Brushless Accessory Part ForXO-1RevoSummitT-Maxx$10 -
TRA5131R
Traxxas Upper Suspension Arms (2): T-Maxx 2.5, 2.5R, 3.3, E-Maxx
These are the Upper Suspension Arms for the T-Maxx 3.3. FEATURES:Fastens to bulkhead and helps to support axle carriersBlack in color, constructed of hardened plastic INCLUDES:One Right and one Left Upper Suspension Arm for the T-Maxx 3...$750 -
TRA3942X
Traxxas 12-Tooth 32P Machined Hardened Steel Pinion Gear w/Set Screw
This is the Traxxas 12-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear.Accessory Part For1/10 E-Revo BrushedE-MaxxSlash 4x4...$595 -
RPM80332
RPM Black Snap-Tite RC Car & Truck Body Savers
This is a set of RPM Black Snap-Tite Body Savers. One of the weakest points on a Lexan body is where the body mounts to the chassis. The holes cut in the body for the body posts have a tendency to crack and fracture. This is the reason RPM designed these...$229 -
TRA5117
Traxxas Ball Bearings, 6x12x4mm (2)
This is a pair of Traxxas 6x12mm Ball Bearings with Rubber Dirt Shields. Pair of 6x12x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction...$4 -
RRP8714
Robinson Hard Steel 14T Pinion - 5mm Bore 0.8 Mod (31.75P)
This is the Robinson Racing Extra Hard Steel 14-Tooth 0.8 Mod Pinion Gear with 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless, and Summit...$849 -
TRA4976
Traxxas Wheelie Bar Wheels & Axles: T-Maxx 3.3
These are the Wheelie Bar Wheels for the Traxxas 3.3 T-Maxx. FEATURES:Constructed of hard plasticAxles constructed of steel INCLUDES:Four wheels and two axles REQUIRES:Installing on wheelie bar SPECS:Thickness: 0.39" (10mm)Diameter: 1.02" (26.1mm)$4 -
TRA5189
Traxxas 4x13mm Screw Pins with Threadlock (4)
This is a set of four Traxxas 4x13mm Screw Pins with Threadlock. These are used on many vehicles, such as the E-Maxx, T-Maxx, Revo 3.3, Slayer, and XO-1.FeaturesMetal ConstructionBlack in ColorHex Head DesignThreadlockIncludes: Four 4mm x 13mm Black...$350 -
TRA6538
Traxxas Telemetry Spur Gear Trigger Magnet Holders
These are the Traxxas Telemetry Trigger Magnet Holders for the TQi radio system. The telemetry trigger magnet holders secures the trigger magnet to the spur gear to provide real-time RPM and speed data when combined with an RPM sensor, TQi radio with...$3 -
RRP8724
Robinson Extra Hard 5mm Bore 24T Pinion 0.8 Mod (31.75P)
This is the Robinson Racing Extra Hard 24-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless,...$849 -
RPM80165
RPM Shock Tower & Adjustable Body Mount (Blue): T-Maxx 2.5, 3.3, E-Maxx
This is the RPM Blue Shock Tower and Body Mount Set for the Traxxas T-Maxx and E-Maxx trucks. This will mount on either the front or the rear of the truck. Purchase two packages to upgrade both the front and rear. Fits all Traxxas T-Maxx .15, 2.5, 3...$1299 -
TRA3767P
Traxxas Pink Aluminum Shock Caps (4) for all Ultra Shocks
This is the Traxxas aluminum (pink Anodized Shock Caps Shock caps, aluminum (pink-anodized) (4) (fits all Ultra Shocks)Aluminum shock caps are great way to boost the durability and style of any Traxxas vehicle equipped with Ultra Shocks. The machined...$14 -
TRA5646
Traxxas 20T Pinion Gear 0.8 Mod 32P for 5mm Shaft, with Set Screw
This is the Traxxas 20-Tooth Pinion Gear with 0.8 Mod (compatible with 32-pitch) for 5mm Shaft motors. This can be used on vehicles such as the E-Maxx Brushless and 1/10 Summit.FeaturesHardened steel20 tooth0.8 Mod / 32 pitchFits 5mm shafts IncludesOne...$5 -
TRA2579
Traxxas 3x15mm Buttonhead Hex Machine Screws (6)
These are the Traxxas 3x15mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used across many different Traxxas vehicles.Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL...$250 -
RPM80152
RPM Black Front & Rear Bulkhead Braces for Traxxas T-Maxx & E-Maxx
This is the RPM Black Front and Rear Bulkhead Brace Set for the Traxxas T-Maxx .15, 2.5, 3.3, E-Maxx, and E-Maxx Brushless trucks.RPM T/E-Maxx bulkhead braces support the bulkheads for added strength to both the front & rear of the vehicle. Much of the...$649 -
TRA5118
Traxxas Ball Bearings, 8x16x5mm (2): Revo, E-Maxx, Slayer
This is a pair of Traxxas 8x16x5mm Ball Bearings. These are replacements for the differential bearings in the Revo and other vehicles. Features: Stainless Construction Blue Rubber Sealed Includes: Two 8mm x 16mm Rubber Sealed...$6 -
TRA4611
Traxxas Ball Bearings 5x11x4mm
This is a pair of Traxxas 5x11x4mm ball bearings. These are used in the clutch bells of many of the Traxxas vehicles. Features:Ball bearings reduce friction and last longer than bushings.Chrome steel construction.Used to upgrade from...$6 -
TRA3952X
Traxxas 22-Tooth 32P Machined Hardened Steel Pinion Gear w/Set Screw
This is the Traxxas 22-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear.Accessory Part For1/10 E-Revo BrushedE-MaxxSlash 4x4...$595 -
TRA3915
Traxxas E-Maxx Brushless Clear Body with Decals
This is the Traxxas E-Maxx Brushless Clear Body with Decal Sheet. The body is supplied pre-cut, requiring the paint application.$2495 -
RPM81075
RPM Blue Rear Bulkheads for T-Maxx & E-Maxx
These are the RPM Blue Rear Bulkheads for the Traxxas T-Maxx .15, 2.5, 3.3, E-Maxx, and E-Maxx Brushless trucks. These are backed by RPM's industry-leading lifetime breakage warranty.RPM Rear Bulkheads for the T-Maxx & E-Maxx, combined with RPM front...$1099 -
TRA5151R
Traxxas Steel Center Driveshaft Set: E-Maxx Brushless & 16.8V Trucks
This is a set of Traxxas E-Maxx Brushless and 16.8V Steel Center CV-Driveshafts with Inner and Outer Dust Boots. These are genuine Traxxas upgrade parts, so you know they will fit perfectly, and they will be made to withstand just about anything you can...$3695 -
TRA2968X
Traxxas LiPo Cell Voltage Checker/Balancer with ID Adapter
This is the Traxxas LiPo cell voltage checker and balancer with the #2938X adapter for use with Traxxas iD batteries. This can be used to check cell voltages on 2S, 3S, and 4S Traxxas ID LiPo batteries, and also to equalize the battery pack cells if...$3195
