1/16 Summit

This is set of Traxxas 5525R Heavy Duty Rod Ends (8). These are used in many Traxxas vehicles, including the Stampede 2WD, Rustler, Bandit, Slayer, Jato and 1/16 Summit.Includes:8 rod endsSpecificationsLength: 31.5mm (1.24")Width at ball joint: 11mm (0...

This is the optional Clear Body for the Traxxas Summit VXLFeaturesTrimmed and ready to paintIncludesOne Clear Body for the Traxxas 1/16 Summit VXLRequiresPolycarbonate safe spray or brush-on paintGrille and decalsSpecificationsLength: 11.4" (291mm)Width:...

This is the Chassis for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.FeaturesNylon constructionGrey in colorSpecificationsLength: 245mm (9.6")Width: 107mm (4.2")Height: 40mm (1.6")

These are Traxxas 3x10mm Hex Screws (6). Features: Steel construction cap head with hexagon socket drive insert Metal lock washers Includes:(6) Screws(6) Lock Washers(1) Hex Wrench Specifications:Screws:Diameter: 3mmLength: 10mm Lock Washers:Inner...

This is the Hot Racing Red Aluminum Steering Arm Post for Traxxas 1/16 E-Revo, Slash, Summit, and Rally vehicles. This will fit brushed and VXL brushless versions of these 1/16 cars and trucks. This is a direct replacement for Traxxas part 7043...

This is the Traxxas Telemetry Trigger Magnet for the Traxxas TQi Telemetry System. Replacement 5x2 mm telemetry trigger magnet.IncludesOne Telemetry Trigger Magnet for the Traxxas TQi Telemetry SystemSpecifications5mm x 2mm round magnet Replacement Part...

These are the Differential and Transmission Yokes for use on the Traxxas 1/16 E-Revo, Slash, and Summit vehicles.FEATURESNylon constructionBlack in colorINCLUDESTwo YokesTwo 3x10mm Screw PinsREQUIRESInstallation on the vehicle

This is the Traxxas Foam Body Washers - 2mm/3mm/4mm Adhesive-backed foam body washers help protect your custom paint work by providing a cushion between the body and body post for more secure mounting and less rattling. Includes (4) 2 mm(4) 3 mm(4) 4...

This is the Traxxas Body mounts, front & rear. This is Traxxas part number 7215Part Number: 7215 / TRA7215Fits1/16 SummitMore detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or contact us if you have any questions.

This is the Traxxas Spur gear, 55-tooth. This is Traxxas part number 7047R55-tooth spur gear (48-pitch) with telemetry magnet holder. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance...

This is the Traxxas Bellcrank Bushings (Plastic) set (5x8x2.5mm) (4) Includes: Set of four 5x8x2.5 mm bellcrank bushings

These are the Traxxas Left and Right Axle Carriers for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles. Features: Nylon construction Black in color Includes:One Left Axle CarrierOne Right Axle Carrier

This is the Traxxas Gearbox Halves Front & Rear Front and Rear gearbox halves Replacement Part For1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit

This is the Traxxas Push rods, aluminum (red-anodized) (4) (assembled with rod ends). This is Traxxas part number 7118XPart Number: 7118X / TRA7118XFits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Grave Digger1/16 SummitMore detail coming soon!...

These are Traxxas 4x8x3mm Sealed Ball Bearings (2). These are used in 1/16 vehicles such as the E-Revo and Slash, as well as many other Traxxas vehicles. Features:Blue rubber sealedMay also be used in any vehicle where this size bearing is...

These are Traxxas 2.5x8mm Cap Head Screws (6). Features: Steel construction Black in color Cap head design Includes: (6) 2.5x8mm cap head screws Specifications:Length: 5/16" (8mm)Diameter: 3/32" (2.5mm)

This is the Traxxas 1/16th Summit Decals Sheets of pre-cut adhesive 1/16 scale Summit decals

This is the Traxxas LiPo cell voltage checker/balancer. This voltage checker and balancer requires the #2938X adapter if you are using it with Traxxas iD batteries.Use the LiPo battery checker to view individual LiPo cell voltages and overall...

This is the Traxxas Blue Aluminum 1/16 Motor Plate When upgrading your 1/16 scale vehicle to Velineon brushless power, you will need to change the standard motor plate and mount. Use the 7090 motor plate and 7060 motor mount with the Velineon 380...

This is the Traxxas Metal Gear Set For 2065R Waterproof sub-micro servo Replacement metal gear set for 2065R servo. Gears may also be used to upgrade the 2065A and 2065T servos. Gears do not fit 2065 or 2065X servos. Replacement Part ForTRX-4MT 1/18 1979...

This is the Traxxas Servo Case/Gaskets (for 2065A waterproof sub-micro servo) Replacement case for 2065A servo. Includes gaskets. Case does not fit 2065 or 2065X servos. Replacement Part For 1/18 LaTrax Desert Prerunner1/18 LaTrax Rally1/18 LaTrax...

This is the Traxxas Gear Set for Micro Waterproof ServoReplacement gear set for 2080A servo. Does not fit 2080 or 2080X servos.Replacement Part For These Models:1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit

This is the Traxxas Waterproof Micro ServoThe 2080A waterproof micro servo gives you the freedom to drive in rain, mud, and snow.Replacement Part For These Models:1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit

This is the Traxxas LED Lights, Power Supply (Regulated, 3V, 0.5-Amp) w/ Power Tap ConnectorThis rugged and waterproof power supply provides a tightly-regulated 3-volt output current for your Traxxas 1/16 scale LED light kit. Includes(2) 2.6x8...

This is the Traxxas Power Tap Connector, Voltage Sensor Plug w/ Hardware The power tap connector plugs inline between the battery and ESC to provide power to the optional LED power supply and telemetry voltage sensor.   Includes (2) 2.6x8 mm...

This is the Traxxas LED light kit- 1/16th Summit Light up the trail with this powerful LED light kit for the 1/16 scale Summit. With four LEDs on the front bumper and another four on top of the roll cage, Summit illuminates the path ahead. Dual red...

These are the Traxxas Flanged and Serrated Nuts, Aluminum (4mm) (Orange-Anodized) (4) Lightweight and great looking, these 4 mm anodized aluminum flanged lock nuts are the perfect finishing touch for your vehicle. The serrated flange and nylon locking...

This is the Traxxas ExoCage, 1/16th Summit (includes mounting hardware). This is Traxxas part number 7220Part Number: 7220 / TRA7220Fits1/16 SummitMore detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or contact us if you...

This is the Traxxas Gear set, transmission (includes 18T, 25T input gears, 13T idler gear (steel), 35T output gear, M3x13.75 screw pin). Transmission gear set includes 18-T and 25-T input gears, 13-T steel idler gear (steel), 35-T output gear, and M3x13...

This is the Traxxas Gear Cover with Motor Mount Hinge PostReplacement gear cover with motor mount hinge post and 3x10 mm screw with split and flat washers and 3x8 mm screwAccessory Part For1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4x41/16 Summit

This is the Traxxas Rebuild kit, GTR composite shocks (x-rings, bladders, pistons, e-clips, shock rod ends, hollow balls) (renews 2 shocks). This is Traxxas part number 7062Part Number: 7062 / TRA7062Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16...

This is the Traxxas Finned Aluminum Motor Mount The finned aluminum motor mount connects to the 7090 aluminum motor plate to provide a solid mounting surface for the Velineon 380 brushless motor. Does not fit Titan motor or 7380 motor plate Accessory...

This is the Traxxas Hollow balls (20). This is Traxxas part number 7028Part Number: 7028 / TRA7028Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave Digger1/16 Kyle Busch Truck1/16 Rally VXL1/16 Slash...

This is the Traxxas Rebuild kit, center differential (includes o-rings and diff gear covers). This is Traxxas part number 7014XPart Number: 7014X / TRA7014XFits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16...

This is the Traxxas VXL-3m Brushless Waterproof Electronic Speed Control (ESC). This is a stock replacement for Traxxas 1/16 scale brushless trucks, and it comes pre-wired with the Traxxas high-current connector.This is the stock replacement ESC...

These are the RPM Blue Front Upper & Lower Suspension A-Arms for Traxxas 1/16 E-Revo and 1/16 Grave Digger trucks.Upon the release of the Traxxas 1/16th Scale Mini E-Revo, RPM immediately started receiving requests for durability upgrades. What...

This is the Bold RC Adventure Trail Backpack Adventure Trail BackpackThe Adventure Trail Backpack is a versatile and lite weight RC transportation option. Featuring a durable shell material that stands up to various conditions, reinforced stitching,...

This is the Pro-Line RC Track Bag with Tool Holder Show up to the races in Style with Pro-Line’s Track Bag! The bag features luggage quality zippers. The bag is supported by an inner corrugated plastic housing that protects your stuff and holds the...

This is the Rage RC Black Large Gear Bag The Rage R/C Large Gear Bag will fit a 1/8 buggy, drone, truck or boat; and will keep the model safe and your automobile interior clean after a day at the pond, field, trail or track. The bag features a zip top...

This is the Traxxas Racing Sponsors Decal Sheet Dress up your model’s body with the Traxxas Racing Sponsor Decal Sheet. The decal sheet includes over 25 different full-scale sponsors including, NOS, K&N, Mechanix Wear, Holley, and Hooker...