Traxxas

This is the Traxxas Official Team Traxxas Racing Decal Set (Flag Logo/ 6-color) The official Team Traxxas Racing Decal sheet has been revised and now includes EZ-Start, Stinger Motors, ProGraphix,...

This is the Traxxas Wheel hubs, hex, aluminum (4) (blue-anodized). This is Traxxas part number 7154XPart Number: 7154X / TRA7154XFits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16...

This is the Traxxas Rod ends (8)/ hollow balls (8) Set of eight rod ends with hollow balls Accessory Part For1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Slash 4X41/16 SummitTRX-4M 1/18 1979...

These are the Traxxas 2.5x6mm Cap-Head Hex Machine Screws. These come in packages of six screws, and are used in a wide variety of Traxxas vehicles.Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16...

This is the Traxxas Body Reamer Cap The Traxxas body reamer is a finely-honed cutting instrument. Protect your reamer's cutting surface with this replacement aluminum cap.

This is the Traxxas Shock Oil Bottle (60cc) Create your own custom shock oil weights by combining different silicone shock oils in this mixing bottle.

This is the Traxxas Battery door TQ 2.4 transmitter (Replacement for #6516, 6517 Transmitter) Replacement battery door for 6516, 6517, 6528, 6529, and 6530 TQ transmitters Replacement Part For1/16...

This is the Traxxas Metal Gear Set for the 2080X Micro Servo for the 1/16 scale vehicles. Accessory Part For1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Slash 4x41/16 Summit

This is the Traxxas 2-Amp DC Quick Charger for 5-7 Cell, 6.0-8.4V NiMH batteries. This is intended for use with the Traxxas 2925X 1200mAh batteries with the ID connector.Stock Replacement On1/16...

This is the Traxxas Spring, shock (GTR) (0.88 rate, double green) (1 pair). This is Traxxas part number 7141Part Number: 7141 / TRA7141Fits1/16 Slash 4x4Funny CarMore detail coming soon! Please...

This is the Traxxas Spring, shock (GTR) (0.82 rate, double orange) (1 pair). This is Traxxas part number 7140Part Number: 7140 / TRA7140Fits1/16 Slash 4x4Funny CarMore detail coming soon! Please...

This is the Traxxas Input shaft/ output shaft. This is Traxxas part number 7092Part Number: 7092 / TRA7092Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss...

This is the Traxxas Piston, damper (2x0.5mm hole, red) (4)/ travel limiters (4). This is Traxxas part number 7067Part Number: 7067 / TRA7067Fits1/16 E-Revo Brushed1/16 Ford Fiesta1/16 Ford Mustang...

This is the Traxxas Rebuild kit, steel constant-velocity driveshafts (includes pins, o-rings, stub axles for driveshafts assemblies). This is Traxxas part number 7055Part Number: 7055 /...

This is the Traxxas Steel Constant Velocity Driveshaft Set for the 1/16 Slash 4x4 and 1/16 Rally VXL vehicles.  This includes all four driveshafts and axles.Traxxas Steel Constant Velocity...

This is the Traxxas Aluminum caps, pivot ball (threaded aluminum, hard-anodized with PTFE-coating) (8)/ hex wrench, 5mm. This is Traxxas part number 7033XPart Number: 7033X / TRA7033XFits1/16 E-Revo...

This is the Traxxas Seal kit, receiver box (includes o-ring, seals, and silicone grease). This is Traxxas part number 7025Part Number: 7025 / TRA7025Fits1/16 E-Revo Brushed1/16 E-Revo VXL...

This is the Traxxas Box, receiver (sealed)/ wire cover/ foam pads, upper & lower/ silicone grease/ 2.5x8 CS (4)/ 3x4 GS (1). This is Traxxas part number 7024XPart Number: 7024X / TRA7024XFits1/16...

This is the Traxxas Suspension pin set (front or rear), 2x46mm (2), 2x14mm (4).  Suspension pin set includes 2x46 mm (2) and 2x14 mm (4) suspension pins. Fits: Front or Rear. Replacement Part...

This is a set of Traxxas 2.5x12mm Countersunk Hex Head Machine Screws (6 pack). These are used in many of the 1/16 scale Traxxas vehicles.SpecificationsLength: 12mmWidth: 2.5mmFits1/16 E-Revo...

This is set of Traxxas 2.5x10mm Countersunk Machine Screws with Hex Heads (6 pack). These are used in many of the Traxxas 1/16 scale vehicles.SpecificationsLength: 10mmDiameter: 2.5mmFits:1/16...

This is the Traxxas Servo Case and Gasket Set for 2080 Micro Waterproof Servos.The 2080 servo has been used in vehicle such as:1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford...

These are the Assembled Stub Axles and Yokes for use on the Traxxas 1/16 E-Revo, Slash, and Summit Vehicles.  These fit the brushed and VXL brushless versions...

These are the Wheel Hubs and Axle Pins for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.FEATURESNylon constructionBlack in colorINCLUDESFour Wheel HubsFour 1...

These are Traxxas Assembled Short Course Tires and Wheels for use on the Traxxas 1/16 Slash VXL 4WD. Features: SCT satin chrome wheels Red beadlock style SCT off-road racing tires Includes:One...

This is the Traxxas Front and Rear Bumper for use on the Traxxas 1/16 Slash VXL 4WD. Features: Nylon construction Black in color Includes:One Front BumperOne Rear Bumper

This is a 28-tooth 48-pitch replacement Pinion Gear for the Traxxas Slash 2WD and other vehicles. FEATURES:Metal construction. INCLUDES:One Pinion GearOne Set Screw SPECS:Teeth: 28Pitch: 48