Traxxas

This is the Traxxas Chevrolet C10 Blue Body. Included is the wing and decals. **Requires part #9415 series body accessories to complete body Accessory Part ForDrag Slash

This is the Traxxas Chevrolet C10 Black Body. Included is the wing and decals. **Requires part #9415 series body accessories to complete body Accessory Part ForDrag Slash

These are the Traxxas E-Revo 2 Green 17mm Splined Hex 3.8 Wheels (2).Accessory Part ForE-Revo 2.0

These are the Traxxas Unlimited Desert Racer Front Differential Ring and Pinion Gears. These are stock replacement diff gears.Stock Replacement OnUnlimited Desert Racer (UDR)

This is the Traxxas Unlimited Desert Racer Front Bumper and Support.Stock Replacement OnUnlimited Desert Racer (UDR)

This is the Traxxas TRX-4 Machined Steel Overdrive Differential Ring and Pinion Gear Set. This will fit the front or rear diff on the TRX-4 trucks. Use of this set results in higher wheel speed. ...

This is a pair of Traxxas TRX-4 Tactical 1.9" Wheels.Stock Replacement OnTRX-4 TacticalAccessory Part ForTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land RoverTRX-4 Sport

This is a pair of Traxxas Green Rear Springs for XXL Rear Ultra Shocks on trucks such as the Rustler, Slash 2WD, and Stampede.Accessory Part ForBIGFOOT No. 1 Officially Licensed ReplicaFord F-150...

This is the Traxxas 24-Tooth 48-Pitch Pinion Gear with Set Screw. This can be used with the the 4-Tec 2.0, or any other vehicle requiring a 24T 48-pitch pinion gear.Fits4-Tec 2.0

This is the Traxxas 4-Amp DC Charger. This charger can be used with 6-cell 7.2V and 7-cell 8.4V NiMH Traxxas iD Batteries.FeaturesTraxxas's iD technology automatically configures and optimizes...

This is a set of six Traxxas Wheel Hex Clips for the X-Maxx monster truck.FeaturesSteel constructionSnaps onto groove of each stub axle to hold wheel hub and uprights in placeIncludes: Six Wheel Hex...

This is the Traxxas 17-Tooth Pinion Gear with 0.8 Mod (compatible with 32-pitch) for 5mm Shaft motors. This can be used on vehicles such as the E-Maxx Brushless and 1/10 Summit. 17-tooth pinion gear...

This is the Traxxas Blue Aluminum Header for Rear Exhaust TRX 2.5, 2.5R, and 3.3 Engines on the Nitro 4-Tec, Nitro Rustler, and Nitro Slash trucks.FitsNitro RustlerNitro SlashTRX 2.5RTRX 3.3

This is the Traxxas Transmission Gear Dust Cover Set with Screws for the Bandit, Rustler, Slash 2WD, and Stampede 2WD trucks. This set is designed to accommodate telemetry sensors...

This is a pair of Traxxas Long Gray Ultra Shocks, Complete with Springs, Pre-Load Spacers, and Shock Oil. Traxxas oil-filled Ultra Shocks utilize X-rings for a perfect seal and super-smooth...

This is a Traxxas Servo Case for 2018 servos.FeaturesReplaces top, center and bottom sections of damaged servo casesConstructed of black plasticIncludesOne Servo Case Set for the Traxxas #2018 Servo...

This is a pair of Traxxas 1/16 Summit Canyon AT Tires mounted on Geode Wheels with Red Simulated Beadlocks. The tires come pre-mounted, so you can install and use them right away!INCLUDES:Two...

This is the Traxxas Skid Plate Set for use on the 1/16 E-Revo and Slash VXL Vehicles. Features: Nylon construction Black in color Includes:One Front SkidplateOne Rear SkidplateOne Transmission Skid...

These are a set of 2.2" Mounted Satin Chrome Wheels and Tires for the Traxxas Slash, TRAC43**. FEATURES:Rear tires2.2" Satin Chrome WheelsOff-Road Racing Tires5 spoke design INCLUDES:Two 2.2" mounted...

These are the Wheelie Bar Wheels for the Traxxas 3.3 T-Maxx. FEATURES:Constructed of hard plasticAxles constructed of steel INCLUDES:Four wheels and two axles REQUIRES:Installing on wheelie...

This is the 16-T Pinion (48-pitch) Gear with Set Screw 16-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your...

This is the Traxxas Green HD WideMaxx Suspension Kit: Mini Maxx The mini WideMaxx kit widens Mini Maxx’s stance for even greater cornering stability. Molded from our toughest composite...

This is the Traxxas Blue HD WideMaxx Suspension Kit: Mini Maxx The mini WideMaxx kit widens Mini Maxx’s stance for even greater cornering stability. Molded from our toughest composite material,...

This is the Traxxas Red HD WideMaxx Suspension Kit: Mini Maxx The mini WideMaxx kit widens Mini Maxx’s stance for even greater cornering stability. Molded from our toughest composite material,...

This is the Traxxas Black HD WideMaxx Suspension Kit: Mini Maxx The mini WideMaxx kit widens Mini Maxx’s stance for even greater cornering stability. Molded from our toughest composite...

This is the Traxxas Orange HD WideMaxx Suspension Kit: Mini Maxx The mini WideMaxx kit widens Mini Maxx’s stance for even greater cornering stability. Molded from our toughest composite...

This is the Traxxas BL-2s Waterproof Brushless ESC BL-2s Brushless Electronic Speed ControlThe waterproof BL-2s speed control delivers all the benefits of brushless technology with the safety and...

These are the Traxxas E-Revo 2 Front, Mid, and Rear skidplates for use with trucks running the 8629 and 8630 bulkheads (stock on E-Revo 2).Stock Replacement OnE-Revo 2.0

This is a pair of Traxxas 2.8 Paddle Tires on Black Chrome Wheels for Stampede 4x4 front/rear, or the rear of 2WD Nitro trucks. Add these to your truck for awesome grip in sand, mud, snow, or...

This is the Traxxas X-Maxx 8S Chassis Top Brace. Replacement X-Maxx chassis top brace Replacement Part ForX-Maxx UltimateX-Maxx

This is the Traxxas 11-Tooth Pinion Gear with 1.0 Mod Pitch and a 5mm Shaft Bore. 11-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Designed for steel spur gears...

This is the Traxxas Velineon VXL-3S Velineon Waterproof ESC. This is the replacement for the ESC found in many of the 1/10 brushless trucks, designed for use with the Velineon 3500 motor. See full...

This is the Traxxas Cush drive key/ pin/ elastomer damper. This is Traxxas part number 6465Part Number: 6465 / TRA6465FitsXO-1More detail coming soon! Please check your vehicle manual to confirm...

This is a set of two Traxxas Battery Compartment Doors for the 1/10 E-Revo and Summit trucks.Includes: One left and one right doorFits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitMore detail...

This is the Traxxas 2.5 and 3.3 Spring-Mounted Exhaust Header Set for the Revo 2.5, 3.3, and Slayer trucks.FitsRevo 3.3SlayerSlayer Pro

This is a set of four Traxxas 4x13mm Screw Pins with Threadlock. These are used on many vehicles, such as the E-Maxx, T-Maxx, Revo 3.3, Slayer, and XO-1.FeaturesMetal ConstructionBlack in ColorHex...

This is the Traxxas Black Front Bumper, Mount, and Hardware for the Stampede 2WD, Craniac, Skully, and 1/10 Monster Jam Trucks.Fits1/10 Monster Jam TrucksCraniacSkullyStampede 2WD

This is a pack of Traxxas 3x15mm Countersunk Hex Head Machine Screws. Each package includes six screws.Fits:1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitE-MaxxE-Maxx BrushlessFunny CarJato 2...

This is a pair of Traxxas 72mm Turnbuckles for use as tie rods or optional rear camber rods. This is Traxxas part number 2335.

These are the Traxxas Self-Lubricating 5x11x4mm Bushings (14). These are Traxxas part 1675.FeaturesMade of metalIncludes: 14 bushingsSpecifications: 5x11x4mmComments: These bushings would work on...