Traxxas

This is a quart of Traxxas Top Fuel 20% Nitro Radio Controlled Car and Truck Engine Fuel. Traxxas Fuels are Perfectly Blended with high quality ingredients to give your Engine Easier Starts,...

This is the Traxxas Recoil Starter for the 2.5, 2.5R, and 3.3 Traxxas engines on vehicles like the Revo, T-Maxx, Rustler, and Jato.  Removing the stock EZ-Start system and using a...

This is a Traxxas Glow Plug Wire Lead for all Traxxas EZ-Start 1 and 2 equipped vehicles.  It fits the T-Maxx .15, 2.5, 3.3, Revo, Jato, 4-Tec, Rustler, Stampede and all other...

This is a 1.75 oz bottle of Air Filter Oil from Traxxas. FEATURES:Used to treat foam air filter elements to increase their filtering capacity, and extend engine life.1.75 fluid ounce bottle provides...

This is the Traxxas Stock replacement EZ-Start Motor for the EZ-Start (original) System. This motor is what turns the engine over in order to start it.  This is for the...

This is the Traxxas Blue Exhaust Pipe Coupler and Exhaust Deflector with Cable Ties for mounting the muffler to the header, and the deflector to the tip of the muffler.Fits: Jato 2.5Jato 3.3Revo 3...

This is a Traxxas EZ-Start 2 Replacement Motor and Pinion Gear.  This is used on vehicles like the T-Maxx 2.5, 3.3, Revo 2.5, 3.3, Jato, Nitro 4-Tec, Nitro Rustler, Nitro Slash, Slayer Pro,...

This is the Traxxas Glow Plug Lead Wire for the Revo EZ Starting System. This attaches to the glow plug prong to heat the plug during starting. Features: Blue silicone insulated wire with...

This is a pair of Traxxas Throttle Dust Boots and a Return Spring for use on the carburetors of the TRX 2.5, 2.5R, and 3.3 nitro engines.Fits:Jato 2.5 & 3.3Nitro 4-TecNitro Rustler 2.5Nitro SlashRevo...

This is the Replacement Roller Clutch for the Traxxas 2.5 and 3.3. This is located at the EZ Start end of the crankshaft. This is the One Way bearing for the EZ starter and is also used with a pull...

This is the Blue Silicone Pipe Coupler for the T-Maxx 2.5 This goes between the tuned pipe and the header FEATURES:Blue silicone constructionFor use with pipes #5152 and #4452 INCLUDES:One pipe...

This is the Traxxas TRX Pro.15 Nitro Engine with Short Crank The TRX Pro.15 is known for its easy tuning, smooth idle, and reliable running. The Pro.15 features ABC (Aluminum piston, Brass sleeve...

This is the Traxxas Replacement O-ring Header Gasket for the Traxxas 2.5, 2.5R, and 3.3 Engines. This is located on the header of the engine. Features: Red silicone construction...

This is the Traxxas TRX 3.3 Racing Engine with Pull Start.  This will give your Revo, T-Maxx 2.5, or Jato an unbelievable boost in performance.  This is a must have upgrade. ...

This is the Traxxas Blue Aluminum Header for Rear Exhaust TRX 2.5, 2.5R, and 3.3 Engines on the Nitro 4-Tec, Nitro Rustler, and Nitro Slash trucks.FitsNitro RustlerNitro SlashTRX 2.5RTRX 3.3

This is the Traxxas 2.5 and 3.3 Spring-Mounted Exhaust Header Set for the Revo 2.5, 3.3, and Slayer trucks.FitsRevo 3.3SlayerSlayer Pro

This is the Traxxas High-Speed Needle Valve Assembly for the TRX 2.5, 2.5R, and 3.3 nitro engines. This includes the high speed need, fuel fitting, 2.5x1.15mm O-rings (2), and 5.3x7.8x.6mm crush...

This is the Traxxas Engine Connecting Rod for TRX 2.5, 2.5R, and 3.3 Nitro Engines.FeaturesAluminum constructionPre-installed bushingSpecificationsLength: 37mm (1.46")Thickness: 3mm (0.12")Fits:Jato...

This is the Traxxas Updated Wire Harness for the EZ Start and EZ Start 2 Systems. This harness has the white connector that the EZ Start pack plugs into. Features: Extra long 12" wires Pre-installed...

This is the Traxxas Polished Aluminum Resonator Dyno-Tuned High RPM Performance Pipe for the Jato 2.5 and 3.3 trucks.  This will also work on the Nitro Rustler and Nitro 4-Tec from...

This is the Traxxas TRX .12 and .15 Engine Stock Replacement One-Way Bearing.  This bearing is located on the starter shaft. FeaturesSteel constructionRoller bearing design IncludesOne One-Way...

This is the Traxxas TRX 3.3 Engine Wrist Pin with Wrist Pin Clips. This is a replacement wrist pin for the 3.3 engine in vehicles like the Jato 3.3, Nitro 4-Tec, Nitro Slash, Revo 3.3, Slayer Pro,...

This is a package of three Air Filter Foam Inserts for the Traxxas 2.5 engine. FEATURES:Constructed of foam and pre-oiled to trap dirt INCLUDES:Three Air FIlter Inserts for the Traxxas 2.5...

This is a Complete Control Box for the Easy Start 2 on the Traxxas Tmaxx. This houses the 7.2V battery for the Easy Start, and provides the start button. Also for the Tmaxx 3.3...

This is the Cooling Head Protector for the Traxxas TRX 3.3 Racing Engine, TRA5407. FEATURES:Constructed of plastic, black in color INCLUDES:Cooling Head Protector and five 3x6mm...

This is a set of Traxxas TRX 3.3 Cooling Head Gaskets measuring 0.20, 0.30, and 0.40mm. The stock size is 0.30mm. These will give you the ability to tune your engine for optimal performance under...

This is the Header Spring and Gaskets from Traxxas for the TRX 2.5, TRX 2.5R and the TRX 3.3 Engines FEATURES Spring constructed of steel INCLUDESOne header springOne black rubber gasketOne...

This is the Rubber Tuned Pipe Coupler Set for the Traxxas Revo, TRAC71**. FEATURES:Black rubber construction INCLUDES:One black couplerOne black exhaust deflectorTwo 7" (178mm) zip tiesTwo 3" (76mm)...

This is the Traxxas EZ-Start 1 Quick Connector Stock Replacement Wiring Harness. Features: All wires included in an EZ starting system Includes:One complete wire set with connectorsTwo zip tiesOne...

This is the optional Blue Traxxas Resonator Dyno-Tuned Performance Pipe for the Traxxas Jato, Nitro Rustler and Nitro 4-Tec with TRX Racing Engines. FEATURES:The Traxxas Resonator aluminum tuned pipe...

This is the Traxxas Polished Aluminum Resonator Dyno-Tuned Performance Pipe for the Revo 2.5 and 3.3 monster trucks.  This gives the Revo nearly 20% more power on the bottom-end, where...

This is the Traxxas Complete Stock Replacement Carburetor for the Traxxas TRX 2.5 and TRX 3.3 Engines.  A damaged carburetor will severely decrease the power of your engine...

These are 3x5mm Backplate screws for the Traxxas 2.5, 2.5R, and 3.3 engines. 3x6 mm cap-head machine screws with hex drive heads. Features: Black steel construction Includes: Six black...

This is the Resonator Tuned Pipe for the Traxxas Maxx Series Trucks With TRX Racing Engines. FEATURES:Resonator aluminum tuned pipe is specifically engineered to boost performanceThe dual-chamber...

This is the EZ Start 2(R) Starting System from Traxxas. This is the updated replacement for the first-generation EZ Start 2 System. It features a higher torque motor for the new 3.3 race series...

This is the Traxxas TRX 3.3 Engine Piston and Sleeve for the Traxxas TRX 3.3 engines.  This fits the 3.3 engines used in the Traxxas Revo, T-Maxx, Jato, and Nitro 4-Tec vehicles.  A new...

This is the Traxxas replacement piston and sleeve for the TRX Pro .15 engines. Features: ABC (Aluminum piston with a Brass sleeve or liner that is Chrome plated) Matched set with oil ring Includes:1...

This is Traxxas Jato 2.5 and 3.3 Assembled Composite Tuned Pipe.  This features molded composite construction and includes a rubber header gasket. Replacement...

This is a Package of Replacement Cush-Drive Elements for the EZ Start 2 System. FEATURES:Black plastic construction INCLUDES:Four cush-drive elements REQUIRES:The remainder of the EZ Start 2 system...

This is a Traxxas Jato 2.5 and 3.3 E-Z Start Wiring Harness.  This is a direct replacement part.