Traxxas

This is package of 24 Traxxas 1.5mm E-Clips. These are used across a large number of Traxxas vehicles to secure pins and other components.Includes: (24) 1.5mm e-clipsSpecificationsOutside diameter: ...

This is the Traxxas Hinge Pin Screw Set for the Slash 2WD, Slash 4x4, Rustler, Stampede 2WD, and Bandit vehicles.Includes:Two 3mm x 46mm screw pinsTwo 3mm x 40mm screw pinsTwo 3mm x 29mm screw...

This is the Traxxas Digital High-Torque (Ball Bearing) Waterproof Servo Servo, digital high-torque (ball bearing), waterproof Requires Maxx mount Accessory Part ForMaxx Slash

This is the Traxxas Digital High-Torque/High-Speed Metal Gear (Ball Bearing) Waterproof Servo Servo, digital high-torque/high-speed, metal gear (ball bearing), waterproof Replaces Servo...

This is the Traxxas 600 Brushless Digital High-torque Metal Gear Ball Bearing Waterproof Servo High-Torque 600 Brushless Digital ServoThe Traxxas High-Torque 600 brushless servo is the ultimate...

This is the Traxxas 330 Digital High-Torque Coreless Metal Gear Ball Bearing Waterproof Servo, with an output of up to 330 oz/in of torque.High-Torque 330 Blue ServoThe Traxxas High-Torque 330 Blue...

These are the Traxxas Unlimited Desert Racer Front and Rear Sway Bars. Front and rear sway bars Replacement Part ForUnlimited Desert Racer

This is the Traxxas 18-Tooth 1.0 Mod Machined Steel Pinion Gear with Set Screw for 5mm Shaft Motors.18-tooth machined pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw...

This is the Traxxas X-Maxx Rear Bumper Mount and Support.FeaturesMolded composite plastic constructionIncludesBumper MountRear Bumper Support

This is the Traxxas Slipper clutch - complete.  The slipper clutch comes completely assembled and ready to install into your 1/10 scale 4X4 vehicle. The slipper clutch can be used as a standard...

This is the Traxxas Blue Wheelie Bar for the Slash 2WD, electric Stampede 2WD, electric Rustler, and Bandit vehicles.The unique patent-pending Traxxas adjustable wheelie bar features four position...

These are the Traxxas Flathead 3x8mm Hex Drive Screws. Features: Metal construction Black in color Includes: Six 3x8mm Flathead Hex Screws

These are the Traxxas Countersunk 4 x 12mm Screws. Features:Metal constructionBlack in color Includes: Six 4 x 12mm Countersunk Flathead Hex Screws

This is a Package of 3x12x5mm Shoulder Screws for many Traxxas Vehicles. Set of six 3x12 mm shoulder screws (shock attachment screws) with Phillips-drive heads. SPECSLength: 12mm (.47")Diameter: 3mm...

This is the Traxxas Hex Wrench Set with 1.5mm, 2mm, 2.5mm, 3mm, and 2.5mm ball wrenches. Whether you have a Slash, Revo, E-Maxx, Summit, or something else, these are a must-have set of wrenches for...

This is a Tube of White Lithium Grease from Traxxas. This product can be used to lubricate parts, such as gears. FEATURES Great lubrication for nylon gears INCLUDESOne tube of lithium grease...

This is a pair of Traxxas Black Shock Reservoirs for the Unlimited Desert RacerStock Replacement OnUnlimited Desert Racer (UDR)

This is the Traxxas 22-Tooth Pinion Gear with 1.0 Mod Pitch and a 5mm Shaft Bore. 22-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let you...

This is the Traxxas Blue Aluminum Steering Bellcrank set for the Slash XL-5, Slash VXL 2WD, Rustler, and Bandit buggies.Enhance steering precision, strength, and looks with Genuine Traxxas machined...

These are the Traxxas E-Revo 2.0 Steel Constant Velocity Front and Rear Center Driveshafts. This center CVD set is a great way to improve the strength of the E-Revo 2.0 driveline. The set includes...

These are the Traxxas Talon EXT 2.8 Tires with Foam Inserts. These are the stock tires on the Rustler 4x4 trucks. 2.8″ Talon EXT tires dig into dirt and grass for outstanding 4X4 traction. The...

This is the Traxxas Unlimited Desert Racer Rear Axle Shaft.Stock Replacement OnUnlimited Desert Racer (UDR)

This is the Traxxas 20-Tooth Transmission Input Gear and 2.5x12mm Pin. 20-tooth transmission input gear. Includes 2.5x12 mm dowel pin.Replacement Part ForX-MaxxXRT

This is the Traxxas Stub axle, rear, steel-splined constant-velocity (1)Replacement rear stub axle for Traxxas steel CV driveshafts (1951R, 6852R)Accessory Part For:BIGFOOTHoss 4X4 VXLNitro...

This is the Traxxas TQi 2.4GHz 2-Channel Radio System with 5-Channel Traxxas Stability Management (TSM) telemetry-enabled receiver included. Traxxas Stability ManagementTraxxas Stability Management...

These are the Traxxas Hardened Steel Front Driveshafts for the Traxxas 1/10 Scale Slash 4x4, Rally, and Stampede 4x4 vehicles. Traxxas Steel Constant Velocity Shafts offer the ultimate in torque...

This is the Traxxas Maxx Chevron Tires with 3.8" Split Spoke Wheels Maxx Chevron tires are 3.8″ inches of soft compound rubber with a wide, low-profile design for excellent off-road handling...

This is a Traxxas T-Maxx (.15, 2.5, 2.5R, and 3.3) Primerless Fuel Tank.  This is the updated version.  This tank fits all of the nitro Maxx trucks, and there is no...

These are the Traxxas E-Revo 2 Heavy Duty Toe Link Rod Ends (8) with Hollow Balls.Stock Replacement OnE-Revo 2.0

These are the Traxxas Unlimited Desert Racer Steel Hex Wheel Hubs (4).Accessory Part ForUnlimited Desert Racer (UDR)

This is a pair of Traxxas X-Maxx Replacement Upper Suspension Arms. These will work on the front or rear of the truck.FeaturesMolded composite plastic constructionFits both front and rear...

This is a Traxxas M0.8P, 50T Spur Gear. FEATURES M0.8 pitch 50 tooth Black plastic construction Compatible with 32P pinion gears INCLUDESOne M0.8P, 50T Spur Gear SPECSPitch:   M0...

This is a pair of Stub Axle Carriers for the Traxxas Bandit, Stampede and Rustler VXL. FEATURES:Molded nylon construction (black) INCLUDES:Two stub axle carriers REQUIRES:Installation on the vehicle

This is a Traxxas Jato 2.5, 3.3, and T-Maxx 3.3 Antenna Crimp Nut and Antenna Nut Wrench.  This includes the antenna crimp nut and the wrench.

This is a Traxxas 37-Tooth Ring and 13-Tooth Pinion Gear Set for the Traxxas T-Maxx .15, 2.5, 2.5R, 3.3 (model 4909 only), and E-Maxx (model 3906 only).  The differential carrier...

This is a pair of Traxxas Maxx Chevron Tires with Foam Inserts for use with 3.8" Revo and T-Maxx/E-Maxx wheels. These are a great way to give you RC the true off-road monster truck...

This is the Traxxas Bandit Wing Wire. This will fit the Bandit XL-5 and Bandit VXL buggies.

This is the Short RPM Sensor for Traxxas models. FeaturesThe RPM sensor plugs directly into your TQi receiver to provide real-time speed and RPM data while you drive. Real-time telemetry requires a...

This is a set of Gemini Chrome Wheels and Talon Tires for the Traxxas Revo, T-Maxx and E-Maxx. The wheels have a 17mm splined hex.FeaturesFive spoke chrome plated wheel construction Talon tires are...

This is the GTR Shock Rebuild Kit by Traxxas. FEATURES:Shock rebuild parts INCLUDES:Four blue plastic shock pistonsTwo blue rubber diaphragmsFour black plastic shock endsTwo piston lock nutsFour...