Viper Scale Racing .011″ Orange Setup Block

This is the Viper Scale Racing .011″ Orange Setup Block

Viper HO Setup Block
Dial in your car before it ever touches the track. The Viper Setup Block gives you a dead-flat reference surface to check the things that make or break a run: chassis flatness, ride height, guide pin depth, pickup shoe contact, and rear tire and magnet clearance.

Set the car on the block and you’ll see right away if the chassis is tweaked, the shoes aren’t sitting flat, or the guide is too deep or too shallow. Fix it on the bench instead of chasing it lap after lap.

Features

• CNC-Machined acrylic for a true, flat surface
• Works with All HO SLOT CARS
• Compact enough to keep in the pit box
• Tinted, see-through acrylic lets you flip the car and block over to check your tire contact patch and how the bottom of the car interacts with the rails.

Specifications
Available in 6 rail heights, each color-coded so you can tell them apart at a glance:

Rail Height Color
.011″ Orange
.012″ Smoke (gray/black)
.013″ Clear
.014″ Neon Yellow-Green
.015″ Neon Pink
.016″ Blue

Each rail height comes in its assigned color only. Colors can’t be mixed and matched with other heights.

Recommendation Guide
Viper Gen 1 CNC tracks (Pre 2024) .013 to .015
Viper Gen 2 CNC Tracks (Post 2024 to resent) .014 to .016
AFX tracks .015 to .016