Traxxas

This is a set of Traxxas Jato 2.5 and 3.3 Rear Stub Axle Carrier Spacers.

This is a set of two (2) Traxxas Jato Front GTR Shock Springs with the 1.3 Gold Weight Rating.

This is a Traxxas Jato 2.5 and 3.3 On-Board Radio System Wiring Harness.

This is a pair of Traxxas 2.2" Rear Lite Truck Wheels (white) for the Jato trucks, as well as the electric Rustler and electric Stampede.  These are 2.2-inches in...

This is a pair of 5.4 rate (pink) Shock Springs for the Traxxas Revo. FEATURES:Red in color (small pink square indicates spring type)Metal construction INCLUDES:2 springs REQUIRES:Installation on the...

This is the 2.6 rate Spring Set for the Traxxas GTR Shocks used on the Revo. FEATURES:Spring Steel ConstructionRed Outer Nylon CoatingYellow 2.6 tension rating INCLUDES:Two Red 2.6 Springs for the...

This is a set of two Traxxas Talon Tires with Gemini 3.8" Chrome Wheels.  These wheels and tires are a direct replacement for the Revo and T-Maxx 3.3.  They feature soft...

This is a Traxxas Progressive 3 Rocker Arm Set for the Revo 2.5 and 3.3 trucks.  These fit TRA5319 and TRA5319X pushrods.  If you need the pushrods too, search...

This is a Traxxas Long Travel Rocker Arm Set for the Revo 2.5, 3.3, E-Revo, Summit, and Slayer trucks. These fit TRA5318 and TRA5318X pushrods. If you need the pushrods too, search our store for...

This is a package of Traxxas Small Rod Ends and Hollow Balls for the Revo 2.5 and 3.3 trucks.  These are used on the steering linkages of the Revo. FEATURES:Plastic constructionBlack...

This is a Traxxas Revo 2.5 and 3.3 Steering Servo Mount Set.  This includes two sets of servo mounts.

This is the Traxxas White Lithium Grease Tube of white lithium grease

This is the Traxxas Bright Chrome Axle Covers (Front and Rear) Give your TRX-4M a custom look with these bright chrome axle covers. Sold as a pair.

This is the Traxxas X-Truck Black Center Caps (2) X-Truck center caps fit over the 17 mm wheel hexes and secure to the wheels with the included 3x12 mm screws (6) for an authentic scale...

This is the Traxxas X-Truck Chrome Center Caps (2) X-Truck center caps fit over the 17 mm wheel hexes and secure to the wheels with the included 3x12 mm stainless screws (6) for an authentic scale...

This is the Traxxas TRX-4 Long to Short Clipless Chassis Conversion Kit The clipless chassis wheelbase conversion kit contains the necessary hardware to change your TRX-4 from a long (12.8”...

This is the Traxxas TRX-4 Land Rover Defender Clipless Body Latches (Front & Rear) Replacement front and rear clipless body mount latches for 8050-series TRX-4 Land Rover Defender bodies

This is the Traxxas TRX-4 Land Rover Defender Black Body The TRX-4 Land Rover Defender body comes fully painted and trimmed out of the bag with pre-drilled body holes. Includes: Decals. Fits: 324 mm...

This is the Traxxas TRX-4 Sport Tan Clipless Body Is it time to replace your clipless TRX-4 Sport body or upgrade to an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix...

This is the Traxxas TRX-4 Sport Red Clipless Body Is it time to replace your clipless TRX-4 Sport body or upgrade to an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix...

This is the Traxxas Mini XRT Roof Skid with LED Lights For #10715 Bodies Replacement Mini XRT roof skid with cooling vent and LED lights for TRA10785X LED light kit **Fits TRA10715-series Bodies Only...

This is the Traxxas Mini XRT Body Reinforcement Set For #10715 Bodies Replacement body reinforcements for 10715-series Mini XRT bodies. Does not fit 10712-series bodies.

This is the Traxxas Mini XRT Front and Rear Clipless Body Mount Latches Latch, body mount, front & rear (for clipless body mounting) Attaches to TRA10712-series Bodies  

This is the Traxxas Mini XRT Body Reinforcement Set Replacement body reinforcements for TRA10712-series Mini XRT bodies. Does not fit TRA10715-series Bodies.

This is the Traxxas GT-Maxx Springs (4.003-Rate) (2) GT-Maxx rear shock springs allow you to compensate for lighter or heavier vehicle configurations. The higher the spring rate number, the firmer...

This is the Traxxas GT-Maxx Springs (2.462-Rate) (2) GT-Maxx front shock springs allow you to compensate for lighter or heavier vehicle configurations. The higher the spring rate number, the firmer...

This is the Traxxas GT-Maxx Springs (3.097-Rate) (2) GT-Maxx rear shock springs allow you to compensate for lighter or heavier vehicle configurations. The higher the spring rate number, the firmer...

This is the Traxxas Blue Aluminum 1/16 Motor Plate When upgrading your 1/16 scale vehicle to Velineon brushless power, you will need to change the standard motor plate and mount. Use the 7090 motor...

This is the Traxxas 13-Tooth Rear Differential Pinion Gear Use this 13-tooth rear differential pinion gear when installing the shorter 10857 or 10855X center driveshafts along with the optional 10758...

This is the Traxxas Aluminum Center Driveshaft This aluminum driveshaft is shorter than the standard driveshaft to accommodate the optional 10758 slipper clutch or 10760-series center differential...

This is the Traxxas Extreme Heavy-Duty Steel CV Driveshaft Rebuild Kit Rebuild your Traxxas extreme-duty steel CV driveshafts with this kit. Each kit contains the pins and hardware to rebuild one...

This is the Traxxas Assembled Differential w/ 12-Tooth Ring Gear The replacement differential comes completely assembled and ready to install. Fits: Front or Rear Replacement Part ForMini Maxx

This is the Traxxas Servo Gear Set For 2085R Servos Gear set (for 2085R, 2085RL servo)

This is the Traxxas Body Reinforcement Set For #10711 Bodies Replacement body reinforcements for 10711-series Mini Maxx bodies. Replacement Part ForMini Maxx

This is the Traxxas Center Plastic Driveshaft (Requires #10762 with either #10758 or #10760) Use this short driveshaft when installing the optional #10758 slipper clutch or #10760-series center...

This is the Traxxas Complete Slipper Clutch (Requires #10757 & #10762) The Mini Maxx slipper clutch comes completely assembled and ready to install in your truck with an included 47-tooth spur...

This is the Traxxas Spartan SR Electronics Tray with RPM Mount and Stuffing Tube Clamp and Hardware Replacement electronics tray includes receiver box cover, seals, stuffing tube clamp, and stainless...

This is the Traxxas TRX-4M Classic 1979 Ford F-150 Truck Decal Sheet Give your TRX-4M High Trail truck a new look with these classic 1979 Ford F-150 decals. Accessory Part ForTRX-4MT 1/18 1979 Ford...

This is the Pioneer Driver Figure (Bo) from General Lee Figure Pioneer Spare Parts keep your car running at its best IncludesPioneer Driver Figure (Bo) from General Lee SpecificationsScale: 1/32

This is the Traxxas Axle Ring Gear, Axle Pinion Gear Replacement ring and pinion gears from the front and rear axles Replacement Part ForTRX-4MT 1/18 1979 Chevrolet K10 Monster TruckTRX-4MT 1/18 1979...