Traxxas

This is a pair of Traxxas 15x24x5mm Blue Rubber-Sealed Ball Bearings.Features Steel construction with blue rubber seals Used in the front and rear differentials of the X-Maxx Includes: Two 15 x 24...

This is a set of Traxxas 3x30mm Cap-Head Shoulder Screws and Draglink Shoulder Screws for the Bandit, Nitro Slash, Rustler XL-5, and Slash 2WD XL-5 trucks.Includes:(2) 3x30mm Bellcrank Screws(2)...

These are the Traxxas 3x20mm Roundhead Machine Screws. Each package includes six screws.Fits1/10 Monster Jam TrucksBandit XL-5CraniacNitro SlashSkullyStampede XL-5 2WD

This is a pair of Traxxas Tracer 2.2" Black Chrome Rear Wheels for the Traxxas Bandit XL-5 and VXL buggies. These wheels have a slot in the hub to slide over the axle pin.FEATURES:Black Chrome...

These are Traxxas 4x8x3mm Sealed Ball Bearings (2). These are used in 1/16 vehicles such as the E-Revo and Slash, as well as many other Traxxas vehicles. Features:Blue rubber sealedMay also be used...

This is the Temperature and Voltage Sensor for the XO-1 On-Road Car from TraxxasFeaturesFunctions with the Traxxas TQi Link system to display battery voltage and temperature.IncludesTemperature and...

These are the Traxxas Front and Rear Toe Links for use on the 1/16 Slash and E-Revo vehicles. Features: Nylon construction Red in color Includes:Two Front and two Rear Toe LinksEight Hollow...

These are the Traxxas Pushrods for use on the 1/16 Slash VXL 4WD. Features: Nylon construction Red in color Includes:Four PushrodsEight Hollow Balls Specifications:Length: 55mm (2.2")Diameter: 5.2mm...

These are Traxxas 2.5x8mm Cap Head Screws (6). Features: Steel construction Black in color Cap head design Includes: (6) 2.5x8mm cap head screws Specifications:Length: 5/16" (8mm)Diameter: 3/32" (2...

This is the Traxxas 27mHz Two Channel AM Receiver without BEC. 2-channel 27MHz receiver without BEC (for use with electronic speed control) Features: Mounting tabs on either side insure secure...

This is the Carrier Differential for the Traxxas Revo and E-Maxx. FEATURES Replaces worn diff carriers gaskets and spacers INCLUDESDiff Carrier and GasketsSteel Spider Gear Braces (not used with...

This is a pair of Traxxas 2.8" Black Chrome All Star Wheels mounted with Talon Tires. Talon tires provide "just-right" grip and handling on a wide variety of surfaces. The tires come mounted with...

This is a Package of Replacement Cush-Drive Elements for the EZ Start 2 System. FEATURES:Black plastic construction INCLUDES:Four cush-drive elements REQUIRES:The remainder of the EZ Start 2 system...

This is the optional .8 Metric Pitch 65 Tooth Spur Gear for the Traxxas E-Maxx. FEATURES:Nylon construction, black in color.8 metric pitch INCLUDES:One 65T 0.8 metric pitch spur...

This is the Wing Mount for the Traxxas Revo 3.3 FEATURES:Nylon ConstructionBlack in Color INCLUDES:Two Wing SupportsOne Wing MountFour 4mm x 8mm Cap Head Socket ScrewsFour 3mm x 12mm Cap Head Socket...

This is a Traxxas Jato 2.5 and 3.3 Complete Fuel Tank Assembly.  This direct replacement tank features clear nylon construction with spring loaded lid, pre-installed pressure fittings, and the...

This is a Traxxas Jato 2.5 and 3.3 E-Z Start Wiring Harness.  This is a direct replacement part.

This is the Traxxas Front, Mid-Front, and Rear Skid Plate set for the Revo 3.3, 1/10 E-Revo, and Slayer trucks.IncludesFront, mid-front, and rear skid plates(8) 3X10mm button head screws(1) 3X30mm...

This is the Traxxas Front Bulkhead for the Revo and Slayer. Features: Black plastic construction Rocker shafts preinstalled Includes:Front bulkhead halves(2) rocker shafts(4) 4X14mm button...

This is a pair of Traxxas Steel Pushrods with installed rod ends for use with Progressive 1 Rockers or long travel rockers. If you need the rockers too, search our store for TRA5357. If you would...

This is a Traxxas TRX 2.5 and 2.5R Piston and Sleeve kit.  If you have several gallons of fuel through your engine, it may be time for a new piston and sleeve.  It is a...

This is the Stock Replacement Diff Gear Set for the Traxxas T/E Maxx.  These gears can also be referredto as bevel gears. FEATURES:Durable steel construction INCLUDES:Two 13 Tooth Output Gear...

This is the Front Skidplate for the Traxxas T-Maxx Monster Truck. This skidplate bolts to the Chassis (key #4922) and the Bulkheads key #4930 and provides protection to the front differential...

This is the Traxxas Slash Modified Driver Body Cage Body Cage, Driver/ Retainers (3) Fits: #10411 Body Accessory Part ForSlash Late Model BL-2sSlash Modified BL-2s

This is the Traxxas Front and Rear Clipless Body Latches Replacement front and rear clipless body latches for 10411-series Slash Modified bodies. Accessory Part ForSlash Late Model BL-2sSlash...

This is the Traxxas WideMaxx Extreme HD Driveshaft Assembly: Mini Maxx Replacement extreme HD driveshaft assembly fits left or right side, front or rear. Includes screw pin. Fits: WideMaxx-equipped...

This is the Traxxas WideMaxx 71 mm Fixed-Length Front Toe Links (2) Extended toe links (71 mm center to center) fit mini vehicles equipped with WideMaxx suspension components. Sold as a pair...

This is the Traxxas Ford Raptor R Front Grille and Mount Raptor R replacement front grille with 3x10 mm screws (7) Fits: 10111-Series Bodies

This is the Traxxas Pro Scale Sand Car Gloss Black Engine Intake with Hardware Engine intake, black Includes: (2) 2.5x12mm CS, (1) 3x12mm CS Accessory Part ForPro Scale Sand Car

This is the Traxxas Pro Scale Sand Car Black Chrome Engine Intake with Hardware Engine intake, black chrome Includes: (2) 2.5x12mm CS, (1) 3x12mm CS Accessory Part ForPro Scale Sand Car

This is the Traxxas Pro Scale Sand Car Black Chrome Exhaust Headers Customize your Pro Scale® Sand Car's engine with these black chrome replica headers and exhaust. Includes: (8) 2.5x12 mm...

This is the Traxxas Pro Scale Sand Car Satin Chrome Engine Block Customize your Pro Scale Sand Car's engine with this satin chrome replica engine block. Includes: (4) 3x25 mm screws Accessory Part...

This is the Traxxas Differential Gear Set Replacement differential gear set includes output gears (2), output gear shaft, planetary gears (4), planetary gear shafts (4), and differential spacers (2)...

This is the Traxxas Mini XRT Roof Skid with LED Lights Replacement Mini XRT roof skid with LED lights for TRA10785 LED light kit

This is the Traxxas Mini XRT Front Bumper with LED Lights Replacement front bumper with LED lights

This is the Traxxas TRX-4M Ford Bronco Complete Cyber Orange Body TRX-4M clipless bodies come ready to mount on your 1/18 scale truck right out of the bag. Constructed out of tough ABS plastic, the...

This is the Traxxas Universal Glow Plug Wrench Glow plug wrench (Universal wrench) Accessory Part ForJato 3.3Nitro RustlerNitro SlashRevo 3.3 Slayer Pro 4x4T-Maxx 3.3T-Maxx Classis

This is the Traxxas 1/16th Summit Decals Sheets of pre-cut adhesive 1/16 scale Summit decals

This is the Traxxas Nitro 4-Tec Pro Decal Sheet Sheet of pre-cut adhesive Nitro 4-Tec decals

This is the Traxxas Fiberglass Go-Pro Camera Mount Fiberglass camera mount for Slash 4X4 Accessory Part ForSlash 4X4 VXLSlash 4X4Slash 4X4 VXL EHD