Traxxas

This is the Traxxas Aton Front Left & Right LED Lens (Green). This is Traxxas part number 7954Part Number: 7954 / TRA7954FitsAtonAton PlusMore detail coming soon! Please check your vehicle manual to...

This is the Traxxas Aton Rotor Blade Set (2) (Orange) w/Screws. This is Traxxas part number 7930Part Number: 7930 / TRA7930FitsAtonAton PlusMore detail coming soon! Please check your vehicle manual...

This is the Traxxas Aton Canopy Roll Hoop (Green). This is Traxxas part number 7921Part Number: 7921 / TRA7921FitsAtonAton PlusMore detail coming soon! Please check your vehicle manual to confirm...

This is the Traxxas Front & Rear Driveshaft Assembly 6061-T6 Aluminum (Blue-Anodized) (2) Replace the standard composite driveshafts in your 1/18 scale LaTrax Prerunner or Teton with these...

This is the Traxxas Bumpers, front (1)/ rear (1). This is Traxxas part number 7135Part Number: 7135 / TRA7135Fits1/16 E-Revo Brushed1/16 E-Revo VXL BrushlessMore detail coming soon! Please check...

This is the Traxxas Spur gear, 55-tooth. This is Traxxas part number 7047R55-tooth spur gear (48-pitch) with telemetry magnet holder. Traxxas spur gears let you fine-tune the performance of your...

This is the Traxxas Motor mount, 6061-T6 aluminum (blue-anodized). The aluminum motor mount is precision-machined from solid 6061-T6 alloy for extra rigidity and total power transfer in high-power...

This is the Traxxas Caster blocks (c-hubs), 6061-T6 aluminum, left & right (red-anodized). Left and right red aluminum caster blocks improve the appearance, ruggedness, and control of your...

This is the Traxxas Stub axle, front, steel-splined constant-velocity (1)Replacement front stub axle for Traxxas steel CV driveshafts (6851R)Accessory Part ForHoss 4X4 VXLRustler 4X4 VXLRustler...

This is the Traxxas Gear, 29-T pinion (1.0 metric pitch, 20° pressure angle) (fits 5mm shaft)/ set screw. This is Traxxas part number 6492Part Number: 6492 / TRA6492FitsXO-1More detail coming soon!...

This is the Traxxas Splitter extension (universal)/ 3x10mm CC (2). This is Traxxas part number 6432Part Number: 6432 / TRA6432FitsXO-1More detail coming soon! Please check your vehicle manual to...

This is the Traxxas Splitter mount. This is Traxxas part number 6431Part Number: 6431 / TRA6431FitsXO-1More detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or...

This is a pair of Traxxas 1/10 Summit Red GTR Shock 4.9 Rate Double Yellow Stripe Springs.FeaturesSteel construction, red in color4.9 damping rate with double yellow stripe markingIncludes: Two Long...

These are the Traxxas Battery Compartment Vents for 1/10 E-Revo and Summit trucks.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Summit

This is the Traxxas OptiDrive Sensor Assembly for Revo 3.3, T-Maxx 2.5R, and T-Maxx 3.3 trucks equipped with OptiDrive. This part senses the motion of the transmission for forward/reverse shifting...

This is the Traxxas Aluminum Hollow Ball Set for the Revo 3.3, 1/10 E-Revo, 1/10 Summit, Jato, and Slayer trucks. Every ounce matters! Save weight with these aluminum upgrades!Features Aluminum...

This is the Traxxas 15-Tooth 1.0 Mod Clutch bell with 5x8x0.5mm Fiber Washer and 5mm E-Clip. This clutch bell requires using 5x11x4mm ball bearings.FeaturesVented clutch bellOne piece bell...

This is the Traxxas replacement Transmission Gearbox Halves for the T-Maxx 2.5R and 3.3 trucks. This set includes the two gearbox halves and rubber access plug.Features Holds all gears including the...

This is a pair of Traxxas 5x10x4mm Blue Rubber-Sealed Ball Bearings. These are used on vehicles like the 1/10 E-Revo, Revo 3.3, T-Maxx, Slayer, as well as other vehicles.FeaturesMetal bearing...

These are the Traxxas 4x20mm Button-Head Hex Drive Machine Screws. Each package includes six screws. 4x20 mm button-head machine screws with hex drive heads. Set of six.Replacement part for these...

These are the Traxxas 3x15mm Cap-Head Hex Machine Screws. Each package includes six screws. These are used as head bolts on TRX 2.5 engines, and also on other areas of many vehicles.Replacement part...

These are the Traxxas 3x30mm Roundhead Machine Screws. Each package includes six screws. These are for vehicles based on the Stampede XL-5 2WD, including the Stampede, Skully, and Craniac.Fits1/10...

This is a pair of Traxxas Front Suspension Arms for the Bandit, Nitro Rustler, and Nitro Stampede.SpecificationsLength: 3"Width: 1.2"FitsBandit VXLBandit XL-5Nitro RustlerNitro SportNitro Stampede

This is a pair of Traxxas 78mm Turnbuckles.These can be used on:1/10 Monster Jam TrucksCraniacNitro SportRustler XL-5SkullyStampede XL-5 2WD

This is the Traxxas Slipper Tension Spring with Spur Gear Bushing and Locknut.Includes:Slipper tension spring (1)Spur gear bushing (1)4mm Locknut with nylon insert (1) FitsBandit XL-5E-MaxxNitro...

This is the Traxxas Blue Aluminum 17 mm Splined Wheel Hub Adapters (4) These 17 mm hex adapters make it easy to install a wide range of wheel and tire combinations on your Traxxas vehicle...

This is the Traxxas Receiver Box Seal Kit for Slash 2WD, E-Revo, and Summit trucksIncludesSilicone rectangle shaped O-ringSilicone greaseTwo sections of foam rubberInstruction sheetFits1/10 E-Revo...

These are the Traxxas Maxx Tires with Foam Inserts for 3.8" T-Maxx/E-Maxx/Revo Wheels. These will fit 3.8" wheels with the Traxxas bead.Outside Diameter: 6.3"Includes: Two tires with foam...

This is a pair of Traxxas GTR Shock Springs (Long .810 Pink) for 1/10 Slash Ultimate & Platinum trucks with GTR shocks. Shock springs for 1/10 scale long GTR shocks use high-quality spring steel...

This is a pair of Traxxas GTR Shock Springs (XX-Long .711 Orange) for 1/10 Slash Ultimate & Platinum trucks with GTR shocks. Shock springs for 1/10 scale XX-long GTR shocks use high-quality...

This is the Traxxas Blue Aluminum Rear Shock Tower for the Slash 4x4, 1/10 Rally, Stampede 4x4, and Telluride trucks. Made of precision-machined 7075-T6 aluminum and anodized blue, these look great...

This is a Traxxas Rear Shock Tower for the Slash 4x4 and Stampede 4x4 trucks.FEATURES:Hardened plastic constructionBlack in colorINCLUDES: One rear shock towerREQUIRES: Installation on...

This is the Traxxas Driveshaft Rebuild Kit for the Revo, T-Maxx 3.3, and E-Maxx vehicles that have been upgraded with the aftermarket Traxxas steel driveshaft set (part TRA5451R). These are...

This is the Traxxas Bellcrank Bushings (Plastic) set (5x8x2.5mm) (4) Includes: Set of four 5x8x2.5 mm bellcrank bushings

These are the Traxxas Left and Right Axle Carriers for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles. Features: Nylon construction Black in color Includes:One Left Axle CarrierOne Right...

This is the Traxxas Front and Rear Skidplate for the Slash. This skidplate bolts to the chassis and the bulkheads and provides protection to the front differential. Features: Skidplate is...

This is a set of Traxxas Axle Carriers and Steering Blocks for the Traxxas Revo, T-Maxx 3.3, and E-Maxx 3905. The axle carriers and steering blocks support the stub axles and bolt to the upper...

This is a Traxxas Shock Tower for the all versions of the T-Maxx and E-Maxx. This is for use with rectangular body posts. Features: Plastic construction Includes:(1) Shock...

This is a pair of replacement Toe Links for the Traxxas Revo Truck.  These adjust the position of the toe on the vehicle. FEATURES Steel turnbuckle design 5.0mm diameter INCLUDESTwo...

These are the Rear Turnbuckles/Toe Links for the Traxxas 3.3 T-Maxx & E-Maxx X FEATURES Constructed of steel, polished natural finish INCLUDESTwo Rear Turnbuckles/Toe Links for the Traxxas...