Traxxas

This is the Traxxas Front Latch Body Mount with Latch for clipless body mounting (6) 3x12mm XRT front body mount & latches with (6) 3x12 mm screws Fits: 7812 Body Replacement Part ForXRT

This is the Traxxas XRT Chassis Replacement XRT chassis Replacement Part ForXRT

This is the Traxxas Blue Wing Blue XRT wing with (4) 4x12 mm screws Replacement Part ForXRT

This is the Traxxas Orange Wing Orange XRT wing with (4) 4x12 mm screws Replacement Part ForXRT

This is the Traxxas Red Wing Red XRT wing with (4) 4x12 mm screws Replacement Part ForXRT

This is the Traxxas XRT Wing Black XRT wing with (4) 4x12 mm screws Replacement Part ForXRT

This is the Traxxas Front or Rear Differential Output Cup (Hardened Steel Heavy Duty) Give your Sledge the ultimate driveline upgrade with these hardened steel differential output cups. Built for...

This is the Traxxas Low Profile Heat Sink Velineon Low-profile aluminum heat sink for the Velineon 1200XL brushless motor. The heat sink covers nearly 75% of the motor can to draw more heat away...

This is the Traxxas Steering Draglink (Dark Titanium-Anodized) Replacement blue aluminum steering drag link Includes3x14 mm shoulder screws (2) Replacement Part ForSledge

This is the Traxxas Steering Draglink Replacement blue aluminum steering drag link Includes3x14 mm shoulder screws (2) Replacement Part ForSledge

This is the Traxxas Kingpin Bushings (Machined Steel) This set of four kingpin bushings is machined out of solid steel for maximum strength. Kingpin bushings fit inside Sledge's caster blocks to...

This is the Traxxas Front or Rear Center Drive Cup (Steel Constant-Velocity) Replacement heavy-duty hardened steel center drive cup for the upgraded 9655X center CV driveshafts. Fits: Front or Rear...

This is the Traxxas Blue Wheel Covers Fits #9572 Wheels Give your 9572-series wheels a unique look with these colorful wheel covers. Sold as a set of four. Accessory Part ForE-Revo VXL BrushlessSledge

This is the Traxxas Orange Wheel Covers Fits #9572 Wheels Give your 9572-series wheels a unique look with these colorful wheel covers. Sold as a set of four. Accessory Part ForE-Revo VXL...

This is the Traxxas Tires and Wheels Assembled and Glued (Satin Chrome) Ultra-rugged Sledgehammer tires provides extreme traction and control for a variety of off-road terrain. The Sledgehammer's...

This is the Traxxas Tires and Wheels Assembled and Glued (Black Chrome) Ultra-rugged Sledgehammer tires provides extreme traction and control for a variety of off-road terrain. The Sledgehammer's...

This is the Traxxas Tires and Wheels Assembled and Glued (Satin Black Chrome) Ultra-rugged Sledgehammer tires provides extreme traction and control for a variety of off-road terrain. The...

This is the Traxxas Steering Draglink 6061-T6 Aluminum (Green-Anodized) Give your Sledge a bold new look with this brightly-anodized 6061-T6 aluminum steering drag link. Includes (2) 3x14 mm shoulder...

This is the Traxxas Steering Draglink 6061-T6 Aluminum (Red-Anodized) Give your Sledge a bold new look with this brightly-anodized 6061-T6 aluminum steering drag link. Includes (2) 3x14 mm shoulder...

This is Traxxas Steering Draglink 6061-T6 Aluminum (Orange-Anodized) Give your Sledge a bold new look with this brightly-anodized 6061-T6 aluminum steering drag link. Includes (2) 3x14 mm shoulder...

This is the Traxxas Front Center Driveshaft (Steel Constant-Velocity) (Shaft Only) (1) Replacement hardened steel Front center driveshaft for 9655X hardened steel center CV driveshafts. (Does not fit...

This is the Traxxas Rear Center Driveshaft (Steel Constant-Velocity) (Shaft Only) (1) Replacement hardened steel rear center driveshaft for 9655X hardened steel center CV driveshafts. (Does not fit...

This is the Traxxas Suspension Arms Rear (2) Left and right rear suspension arms Replacement Part ForFactory Five '35 Hot Rod Truck

This is the Traxxas Wing Washer Replace your wing washer if it is damaged or cracked Accessory Part ForSledge

This is the Traxxas Front Tie Bars 6061-T6 Aluminum (Green-Anodized) Give your Sledge a bold new look with these brightly-anodized 6061-T6 aluminum front tie bars. Accessory Part ForSledge

This is the Traxxas Front Tie Bars 6061-T6 Aluminum (Red-Anodized) Give your Sledge a bold new look with these brightly-anodized 6061-T6 aluminum front tie bars. Accessory Part ForSledge

This is the Traxxas Front Tie Bars 6061-T6 Aluminum (Orange-Anodized) Give your Sledge a bold new look with these brightly-anodized 6061-T6 aluminum front tie bars. Accessory Part ForSledge

This is the Traxxas Servo Saver Post w/Adjuster Nut and Locknut (Red-Anodized, 6061-T6 Aluminum) (1 Each) Give your Sledge a bold new look with this brightly-anodized 6061-T6 aluminum steering servo...

This is the Traxxas Servo Saver Post w/Adjuster Nut and Locknut (Orange-Anodized, 6061-T6 Aluminum) (1 Each) Give your Sledge a bold new look with this brightly-anodized 6061-T6 aluminum steering...

This is the Traxxas Servo Saver Post w/Adjuster Nut and Locknut (Dark Titanium-Anodized, 6061-T6 Aluminum) (1 Each) Give your Sledge a bold new look with this brightly-anodized 6061-T6 aluminum...

This isthe Traxxas Servo Saver Post/ Adjuster Nut/ Locknut (Green-Anodized, 6061-T6 Aluminum) (1 Each) Give your Sledge a bold new look with this brightly-anodized 6061-T6 aluminum steering servo...

This is theTraxxas Hardened Steel Shock Pins (front (2), rear (2))/ 3x8mm BCS (4) Hardened steel front and rear shock pins with 2.5x8 mm screws (4) Accessory Part ForSledge

This is Traxxas Driveshaft, rear, steel constant-velocity (shaft only) (1) (for use only with #9654X rear steel CV driveshafts)Replacement driveshaft for 9654X hardened steel rear CV driveshafts. Not...

This is the Traxxas Bandit ProGraphix Painted Body From mild to wild, choose your own colors to personalize your body. The detailed graphics are fully painted, but the rest of the body is clear, so...

This is the Traxxas Bandit VXL Purple Painted Body Is it time to upgrade your Bandit with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix paint with pre-applied...

This is the Traxxas Bandit VXL ProGraphix Painted Body The Bandit VXL ProGraphix body includes front and rear canopy with wing and decal sheet. From mild to wild, choose your own colors to...

This is the Traxxas TRX-4 Orange 1979 Chevrolet Blazer Complete Body The TRX-4 1979 Chevrolet Blazer body comes fully painted with pre-applied decals. ProGraphix bodies come...

This is the Traxxas front bumper, skidplate, and tie bar mount w/hardware for the Sledge. IncludesFront BumperFront Skidplate Front Tie Bar Mount(2) 3x25 CS Replacement Part ForSledge

This is the Traxxas Body mounts, front & rear. This is Traxxas part number 7215Part Number: 7215 / TRA7215Fits1/16 SummitMore detail coming soon! Please check your vehicle manual to confirm vehicle...

This is the Traxxas Front Shock Tower. Replacement front shock tower.Replacement Part ForHoss 4X4 VXLRustler 4X4 VXLRustler 4X4