Traxxas

This is the Traxxas Rustler VXL Prographix  body with decals.OverviewWith the ProGraphix process, you will never see bleeding paint or over-sprays that need to be covered up with a page full of...

This is the Traxxas ProGraphix Body and Decal Sheet for the Stampede VXL 1/10 Scale Monster Trucks.  From mild to wild, choose your own color and personalize your body.  The...

This is the 3S LiPo Dual Charging Adapter Board for the Traxxas EZ-Peak Plus 6-amp charger (Traxxas part 2933). This is not designed for use with any other chargers. FeaturesAllows two 3-cell...

This is the 2S LiPo Dual Charging Adapter Board for the Traxxas EZ-Peak Plus 6-amp charger (Traxxas part 2933). This is not designed for use with any other chargers. FeaturesAllows two...

This is the Traxxas Power Cell 7.4V 3800mAh 25C 2S LiPo Battery. Traxxas’ 3800mAh Power Cell LiPo packs are ideal for all Slash, Slash VXL, Slash 4x4 VXL, E-Maxx Brushless, and E-Revo Brushless...

This is the Traxxas Power Cell 7.4V 3300mAh 25C 2S 2-Cell LiPo Battery. This is great for both XL-5 (must have low voltage detection) and VXL brushless versions of the 1/10 vehicles. This is a direct...

This is the Traxxas 2218X Micro TQ 2.4GHz 5-Channel Receiver with Traxxas LinkFeatures2.4GHz technology Traxxas Link automatic model recognition software allow previously bound receiver to be...

This is the Traxxas DTS-1 Drag Timing System. Capture the Total Drag Racing Experience. You've never seen anything like this before! Traxxas innovation takes your racing fun to a whole new level with...

This is the Traxxas 2-3 Cell LiPo Battery Balance Charger. The Traxxas 2-Cell / 3-Cell LiPo Balance Charger allows for simple, convenient charging of Traxxas Power Cell LiPo packs. Your battery...

This is the Traxxas EZ-Peak Plus AC/DC battery charger. The Traxxas EZ-Peak Plus is a fully-programmable AC/DC charger designed for fast and easy charging of LiPo, LiFe, LiIon, NiMH, NiCd, and even...

This is the Traxxas ProGraphix Body with Decals for the E-Revo. Features Graphics are printed, requires paint & final color application Overview With the ProGraphix process, you will never...

This is the Traxxas #47 Mike Jenkins Short Course Racing Truck Body for the Traxxas Slash 4x4 and Slash 2WD trucks. Features: Trimmed and painted with a red and black color scheme Includes: #47 Mike...

This is the Traxxas Greg Adler 4 Wheel Parts Short Course Racing Truck Body for the Traxxas Slash 4x4, Slash 2WD, and Slayer trucks. Features: Trimmed and painted with the Greg Adler 4 Wheel...

This is a pair of Traxxas SS Split Spoke Satin 3.8" Wheels with 14mm hexes, for use on T-Maxx, E-Maxx, E-Revo, and Summit trucks with 14mm hex hubs.Features Ten spoke satin finish plastic...

This is the Traxxas EZ-Peak 2-Amp AC Peak charger.  This will charge 5-8 Cell NiCd and NiMH batteries ranging from 900mAh to 8000mAh. Features: Traxxas High-Current connector Easy Plug-In and...

This is the Traxxas Speed Control Mounting Plate for the Traxxas Bandit, Rustler and Stampede VXL vehicles. Features: Plastic construction, black in color Includes: One speed control...

This is the Traxxas 2.4GHz Micro 4-Channel Receiver. Features: 2.4GHz For use with the Traxxas TQ 2.4GHz 4-ch Spread Spectrum radio Includes: One 2.4GHz 4 Channel Micro...

This is the Traxxas replacement servo gear set for the 2070 & 2075 servos. These servos are found in a wide range of Traxxas vehicles, including:Bandit XL-5 & VX E-Maxx 16.8V & BrushlessE-Revo &...

This is a Grey Lower Chassis for the Traxxas Electric Rustler Series FEATURES Constructed of composite plastic INCLUDESOne Traxxas Grey Lower Chassis REQUIRESInstalling all components onto...

This is the Replacement Servo Saver with Adapters. The spring-loaded servo saver protects your steering servo by absorbing shocks that might otherwise cause internal gear damage. Replacement Part...

This is the Main Chassis for the Traxxas Stampede XL-5. FEATURES Nylon Construction Grey in Color INCLUDESOne Grey Nylon Chassis REQUIRESInstallation into Vehicle

This is the Traxxas ProGraphix Body(ExtChassis), Clear,w/Decal:Revo3.3 Features Graphics are printed, requires paint & final color application Overview With the ProGraphix process, you will...

This is the stock replacement clear body for the Traxxas 1/10 Slash 2WD and Slash 4x4. FEATURES:Highly detailed body and cutting lines INCLUDES:One clear body for the Traxxas SlashOne decal...

This is the Lexan wing for the TRX-1 Includes 1 wing SpecsLength 5 3/4"Width 3"Height 1" RequiresWing mounting wire and buttons

This is the Traxxas 2080 Waterproof Micro Servo for use on the Traxxas 1/16 E-Revo, Slash, Summit, Ken Block Fiesta, Kyle Busch Trucks, Mustang Boss 302, Rally VXL, and other vehicles...

These are the Traxxas S1 Mounted Racing Tire (2) w/14mm Hub FR & R Slayer.  Improve the traction and handling of your Slash, Slayer, and Slash 4X4 with the race-proven performance of...

These are the Red Beadlock Satin Wheels w/SCT Racing Tires for use on the front of the Traxxas Slayer  and the front of the Traxxas Slash FEATURES Glue Type Red Beadlock Rings Silver...

This is a set of Traxxas Center Driveshafts for the E-Maxx 14.4V model 3906. These will not fit E-Maxx 16.8V or E-Maxx Brushless trucks. Features: Outside U-joint is lubricated and sealed by a...

These are the Drive Shaft Joints for the Traxxas Revo. FEATURES:Steel universal joint set INCLUDES:Four Steel Universal blocksFour Steel Universal pinsTwo black steel set pinsFour steel hinge...

This is the Traxxas ProGraphix trimmed body for the Traxxas Rustler VXL. Graphics are pre-applied, so you just need to apply a single color of paint to finish to your liking. With the ProGraphix...

This is the Micro 4-Channel Receiver for the Traxxas E-Maxx. FEATURES:27MHz AM operationReplaces damaged receiver INCLUDES:Installing in vehicle and connecting servos and battery SPECS:Length: 1...

This is the optional Exo-Carbon Fuel Tank Cap for the Traxxas Jato 3.3 (TRAC83**). FEATURES:Plastic constructionExo-carbon finish INCLUDES:One Fuel Tank Cap REQUIRES:Installation on the Jato 3.3

This is the optional Exo-Carbon Front Bumper for the Traxxas Jato 3.3 (TRAC83**). FEATURES:Plastic constructionExo-carbon finish INCLUDES:One Front Bumper REQUIRES:Installation on the Jato 3...

These are the Rear Suspension Arms in Exo-Carbon for the Jato from Traxxas Performance Accessories. FEATURES:Exo-Carbon finish INCLUDES:One Pair (Left and...

These are the Traxxas Jato Exo-Carbon Front Suspension Arms for use on Jato 2.5 and Jato 3.3 trucks.FitsJato 2.5Jato 3.3

This is the optional Exo-Carbon Left and Right Dirt Guards for the Traxxas Jato 3.3 (TRAC83**). FEATURES:Plastic constructionExo-carbon finish INCLUDES:Exo-Carbon Left and Right Dirt Guards for the...

This is the optional Exo-Carbon RX Cover for the Traxxas Jato 3.3 (TRAC83**). FEATURES:Plastic constructionExo-carbon finish INCLUDES:One Front Bumper REQUIRES:Installation on the Jato 3.3

This is the optional Exo-Carbon Battery Cover (Mid Chassis) for the Traxxas Jato 3.3 (TRAC83**). FEATURES:Plastic constructionExo-carbon finish INCLUDES:One Mid Chassis Battery...

This is the optional Exo-Carbon Rear Bumper/Battery Cover for the Traxxas Jato 3.3 (TRAC83**). FEATURES:Plastic constructionExo-carbon finish INCLUDES:One Rear Bumper/Battery...

This is a set of Traxxas 6061 T-6 Aluminum Front and Rear Bumpers for the Traxxas T-Maxx and E-Maxx trucks. These will fit all versions of the T-Maxx .15, 2.5, 3.3, E-Maxx, E-Maxx 16.8V, and...