Traxxas

This is a pair of Traxxas Talon Tires with Foam Inserts, Pre-Mounted on 3.8" Chrome Wheels with 14mm Hex Hubs. These can be used on 1/10 E-Revos, Revo 3.3, E-Maxx, and T-Maxx trucks using 14mm hexes...

This is a pair of Traxxas Split Spoke 3.8" Chrome Wheels with 17mm Splined Hexes for use on T-Maxx, E-Maxx, Revo, E-Revo, and Summit trucks.Features 3.8" 5-split spoke wheels 17mm splined...

This is a pair of Traxxas Hard-Anodized PFTE-Coated T6 Aluminum X-Long Shocks without Springs. These can be used as upgrade shocks for the rear of a wide range of Traxxas vehicles, listed below...

This is a pair of Traxxas Hard-Anodized PFTE-Coated T6 Aluminum Long Shocks without Springs. These can be used as upgrade shocks for the front of a wide range of Traxxas vehicles, listed below...

This is the Traxxas Shift Linkage Set for E-Maxx and E-Maxx Brushless trucks with the 2-speed transmission. It includes the ball cup, servo horn with built-in spring, linkage wire, and hardware...

This is the Traxxas Red 7075-T6 Aluminum Tube 72mm Steering Drag Link with Rod Ends and 7mm Aluminum Wrench for use on the E-Maxx 16.8V and E-Maxx Brushless trucks. This part looks great, and the...

These are the Traxxas E-Maxx Front and Rear Battery Hold Down Retainers with Mounting Screws. These fit the E-Maxx 16.8V and E-Maxx Brushless trucks.IncludesTwo front battery hold down retainersTwo...

This is the Traxxas E-Maxx Brushless ProGraphix Body with Decals. The ProGraphix body comes with pre-printed graphics and only requires one final paint color application to make an awesome looking...

This is the Traxxas Upper Chassis for the Bandit XL-5 and VXL buggy, as well as the Rustler XL-5 and Rustler VXL trucks.Fits:Bandit VXLBandit XL-5Rustler VXLRustler XL-5

This is the Traxxas Red LED Light Set with Harness, LED housings, and mounting hardware for the 1/10 Grave Digger Monster Jam Truck.Includes:4 red lightsLED housings (2)Wire clip (1)Wire ties...

This is the Traxxas Skully Blue Heavy Duty Pre-Painted Body with Decals. This can be used on the Traxxas Skully and other electric Stampede trucks (may require extended body mounts)...

This is the Traxxas Skully Green Heavy Duty Pre-Painted Body with Decals. This can be used on the Traxxas Skully and other electric Stampede trucks (may require extended body mounts)...

This is the Traxxas Stampede 2WD ESC and Waterproof Receiver Box Mounting Plate. This is used for installation of XL-5, XL-10, and VXL speed controls, and the waterproof receiver box.Fits1/10...

This is the Traxxas ESC Mounting Plate for XL-5 & XL-10 Electronic Speed Controls in the Bandit, Rustler, Stampede 2WD, and 4-Tec vehicles.FitsBandit XL-5Rustler XL-5Stampede XL-5 2WD4-Tec

These are the Traxxas Blue Front and Rear Skid Plates for the Stampede 2WD, Skully, Craniac, and 1/10 Monster Jam Trucks.Fits1/10 Monster Jam TrucksCraniacSkullyStampede VXL 2WDStampede XL-5 2WD

These are the Traxxas Green Front and Rear Skid Plates for the Stampede 2WD, Skully, Craniac, and 1/10 Monster Jam Trucks.Fits1/10 Monster Jam TrucksCraniacSkullyStampede VXL 2WDStampede XL-5 2WD

This is the Traxxas Stampede ProGraphix Body. It comes with graphics pre-printed, and only a final color application is needed to create a new custom body for your truck! Window, grill, lights, and...

This is the Traxxas Velineon 3500 Motor Replacement Endbell Cover. This is great to help restore the look of your motor, and protect the case and wires.FitsTraxxas 3500 Velineon 1/10 Scale Brushless...

This is the Traxxas VXL Velineon 3500 Replacement Rotor Set. This can be used to help refresh your 1/10 scale Velineon 3500 motor to improve performance back to factory specs. You may also want to...

These are the Traxxas 2760 Blue Aluminum Shock Caps. Each package includes two shock caps. These are for use with Traxxas 4760 and 4761 aluminum shocks.Fits these vehicles when running Traxxas 4760...

These are the Traxxas 3x10mm Roundhead Machine Screws. Each package includes six screws. These are used in the Traxxas Villain boat, as well as some other vehicles.

This is a pair of Traxxas Tracer 2.2" Chrome Front Wheels for the Bandit XL-5 and VXL buggies. These wheels have a slot in the hub to slide over the axle pins.FEATURES:Chrome 5-spoke designFits...

These are the Traxxas Alias Ribbed 2.2" Soft-Compound Front Tires with foam inserts for the Traxxas Bandit XL-5 and VXL buggies.FEATURES:Alias ribbed tiresFor use on front of buggySoft...

This is a pair of Traxxas Bandit Rear Alias 2.2" Tires Mounted on Tracer Chrome Wheels. These are a soft-compound tire with foam inserts, pre-mounted and glued on chrome wheels.These are a direct...

This is the Traxxas Bandit Mitchell DeJong Pre-Painted Body. This is a direct fit on the Bandit XL-5 and Bandit VXL buggies.

This is the Traxxas Bandit VXL ProGraphix Replacement Body and Wing Set with Decals. The graphics are pre-printed, requiring just the final paint color application. This body will also fit the...

This is the Traxxas 2085 Digital High-torque Waterproof Steering Servo for the X-Maxx and Maxx trucks (with Maxx mount).Features Ball bearing equipped Pre-installed aluminum heat sink to help...

This is the Traxxas 2064 Gear Set for the 2065 waterproof sub-micro servo.The 2065 servo has been used in vehicles such as:1/10 E-Revo1/10 SummitE-Maxx 16.8V & BrushlessLaTrax RallyLaTrax TetonLaTrax...

This is a Traxxas Shock Piston Head Set (2 sets of 3 types) with shock collars and lower spring retainers.Includes:2 - Lower spring retainers2 - Upper spring clamps2 each - Plastic 1 hole pistons, 2...

This is the Traxxas Silicone Shock Oil (30 wt) 60cc Bottle. This extra-large bottle is perfect for X-Maxx owners!

This is the Traxxas 2-3 Cell 3-Amp iD LiPo Balancing Wall Charger. This charger is an economical way to charge Traxxas iD LiPos. With a 3-amp charge rate, it will charge a 3000mAh battery in about...

Traxxas Aton 2831X 5000mAh 11.1V 3S 3-Cell LiPo Battery with iD Connector This is the Traxxas Aton 5000mAh 11.1V 3S iD LiPo Battery with iD Connector. This battery is designed for use with the...

Traxxas Aton 2830X 3000mAh 11.1V 3S 3-Cell LiPo Battery with iD Connector This is the Traxxas Aton 3000mAh 11.1V 3S iD LiPo Battery with iD Connector. This battery is designed for use with the...

Traxxas Aton Plus Ready-to-Fly Quadcopter Drone This is the Traxxas Aton Plus Ready-to-Fly Quadcopter Drone with 2-Axis Camera Gimbal (for GoPro and other action cameras - Camera not included),...

This is the Traxxas Aton Ready-to-Fly Quadcopter Drone with 2.4GHz radio, 3000mAh battery, and 3-amp AC quick charger. The Traxxas Aton is your personal video assistant that captures stunning aerial...

This is the Traxxas Slash 4x4 Ultimate Ready-to-Run Brushless Electric Short Course Truck with Traxxas Stability Management, Traxxas iD Quick Charger and 2S 5800mAh LiPo Battery Pack. This comes with...

This is the Traxxas 1/16 E-Revo VXL Brushless Electric 4WD Ready-to-Run RC Monster Truck with Traxxas Stability Management (TSM), TQi Radio System (Bluetooth compatible - Bluetooth module sold...

This is the Traxxas Motor mount (assembled with 3x6 flat-head machine screw)/ 3.0mm NL (1). This is Traxxas part number 7460Part Number: 7460 / TRA7460Fits1/10 RallySlash 4x4 (low-CG)Slash 4x4...

This is the Traxxas 1/16 Summit LED Light Kit. The kit comes with a power supply, chrome lightbar, roof LED light harness (4 clear, 2 red), chassis LED harness (4 clear, 2 red), wire ties, and...

This is the Traxxas 1/16 E-Revo LED Light Kit with LEDs and Bumpers. The package includes four clear LEDs for the front, and four red LEDs for the rear bumper.Fits:1/16 E-Revo Brushed1/16 E-Revo VXL...