Traxxas

This is a pair of Traxxas Response Pro 3.8" Short Knobby Design Tires with Foam Inserts.  These are for use with the Traxxas 3.8" wheels. The Response Pro tires are the ultimate in off-road...

This is the Traxxas Revo 3.3 Adjustable Rear Suspension Arm Set. This allows you to lengthen the wheelbase by 10mm or 19mm depending on conditions and driver preference. OverviewAdds an additional...

These are the Traxxas Front and Rear Toe Links for use on the 1/16 E-Revo VXL 4WD. Features: Nylon construction Red in color Includes:Four Front/Rear Toe LinksEight Hollow...

These are the Traxxas Pushrods and Hollow Balls for use on the 1/16 E-Revo VXL 4WD. Features: Molded composite construction Red in color Includes:Four PushrodsEight Hollow...

These are Traxxas Assembled Short Course Tires and Wheels for use on the Traxxas 1/16 Slash VXL 4WD. Features: SCT satin chrome wheels Red beadlock style SCT off-road racing tires Includes:One...

This is the Traxxas Front and Rear Bumper for use on the Traxxas 1/16 Slash VXL 4WD. Features: Nylon construction Black in color Includes:One Front BumperOne Rear Bumper

This is the Traxxas Stock Dual Motor Plate for the E-Revo truck. This part holds the motors onto the truck. Features: Aluminum construction Blue anodized Specifications:Width: 3.31" (84mm)...

This is the Traxxas Mamba ESC Mounting Plate for the Brushless E-Revo and Brushless E-Maxx. Features: Nylon construction Black in color Includes:One ESC Mounting PlateTwo 3x35mm Cap Head...

This is a pair of Traxxas 2.8" Rear Alias Tires with foam inserts from for use with vehicles such as the Jato. Features: Super soft rubber compund Dual pin design Includes:Two rear Alias tiresTwo...

This is the Traxxas Transmission Output Shaft for the Revo. Features: Metal construction Black in color Includes: One output shaft, Part #5369 Specifications:Overall length: 3-3/8"...

This is a package of Traxxas 5mm x 8mm Bearings (8). Includes: Eight 5mm x 8mm Bearings Specifications:Height: 2.5mmInner Diameter: 5mmOuter Diameter: 8mm

These are Traxxas 5mm Nylon Locknuts (8). Features: Chromed steel construction Nylon inserts Includes: Eight 5mm locknuts Specifications:Thickness: 4.95mm (.195")

This is the Traxxas Lower Chassis Brace for the E-Maxx 16.8V and E-Maxx Brushless. Features: Nylon construction Black in color Replaces worn or damaged lower chassis braces Includes: Right and...

These are the Traxxas 59mm Turnbuckle Toe Links for the Traxxas Rustler, Stampede, and Bandit. Features: Metal and Nylon Construction Silver and Black in Color Assembled w/Rod Ends Includes: Two...

These are the replacement Hollow Balls and Shims for FEATURES Metal Construction Silver and Black in Color INCLUDESFour Silver Metal Hollow BallsFour Black Metal Shims REQUIRESAssembly onto Vehicle

This is the Brake Disc for the Traxxas T-Maxx 4WD RTR Monster Truck. This disc fits between the brake pads and fastens to the rear of the gearbox. FEATURES Replaces worn brake discs Fiber...

This is the Traxxas S1 Slash Tread Racing Tires (2): Slash & Slash 4x4. Features Race-proven, soft-compound rubber improves traction and cornering grip Realistic Traxxas Short Course tread...

This is the Chassis Brace for the Traxxas Revo 3.3. FEATURES Constructed of 0.12" (3mm) thick 6061 T-6 aluminum Anodized blue in color INCLUDESChassis Brace and 4x16mm hex head...

These are the Chassis Braces for the Traxxas New T-Maxx 3.3 4WD Nitro Monster Truck RTR. FEATURES Nylon construction, black in color Replaces worn or damaged chassis braces INCLUDESOne Set of...

These are a set of Traxxas 2.8" Mounted All Star Front Wheels and Tires for the front of the Nitro Stampede or Nitro Rustler. FEATURES 2.8" All Star chrome wheels Talon tires and foam...

These are the Chrome Twin Spoke 2.8" Rear Wheels for the Traxxas Jato 3.3. FEATURES Nylon construction Chrome plated Ten spoke wheel pattern, spokes are in groups of two Uses 12mm hex...

These are the 3.5mm Male Bullet Connectors from Traxxas. FEATURES Gold plated INCLUDESThree male bullet connectors with heat shrink and instruction sheet REQUIRESSolder and soldering...

This is the Traxxas planet & Sungears, Shaft: N, NB, NRU,SLH Replacement hardened-steel internal gears for 2381X differential. Includes planetary gears (4), planetary shafts (4), sun gears (2),...

These are a set of Traxxas 2.8" Talon Tires Mounted on All Star Wheels. These will fit the front of the electric Stampede 2WD and Rustler, Front & Rear of the Stampede 4x4, or the rear of the...

This is the optional Traxxas Revo Tuned Pipe with Resonator FEATURES Designed for use with the Traxxas Revo and Slayer when fitted with the TRX racing engine Dual chamber enhances mid to high RPM...

These are the Rear Red Assembled Tires and Wheels from Traxxas FEATURES Rubber construction, SCT off-road design 5 spoke satin chrome wheels Red beadlock Dual profile INCLUDESTwo Rear Assembled...

This is the Brake Yoke w/Pins for the Traxxas Revo. It is use on the Center/Front Driveshaft Assembly. FEATURES:Plastic Brake YokeSteel Brake Pins(each knurled on one end)Steel Screw...

This is the optional Traxxas Reverse Kit for the Traxxas Revo 3.3 trucks that do not use the Opti Drive module. All the parts you need, even the 2060 sub-micro servo, are included, getting you back...

This is the Long Wheelbase Chassis for the Traxxas E-Maxx. FEATURES:Nylon construction, gray in colorReplaces worn or damaged chassis INCLUDES:One long wheelbase chassis REQUIRES:Installation on the...

This is a set of Rear Only 2.8" Mounted All Star Wheels and Tires for the electric Traxxas Stampede. FEATURES:2.8" All Star black chrome wheelsTalon tires with foam inserts INCLUDES:Two 2.8" mounted...

This is the optional Single Motor Plate for the Traxxas E-Revo TRAC07**. FEATURES:Aluminum construction, blue in colorDesigned for a clean install of a single brushless motor system in the E-Revo RTR...

This is the Traxxas Jato Low RPM Resonator Tuned Pipe This single-chamber Resonator aluminum tuned pipe is precision-engineered on the dyno to increase the low to mid-RPM power output of TRX Racing...

This is the Wheelie Bar Arm for the T-Maxx 3.3. FEATURES:4 snap-in adjustment positions to control degree of wheelie action easily removable if additional control isn't neededConstructed of hardened...

This is a package of Progressive Rate Shock Springs from Traxxas for use with the Traxxas Ultra Shocks set only. These may be used on either the front or rear of the T-Maxx 3.3. FEATURES:Steel...

This is a 28-tooth 48-pitch replacement Pinion Gear for the Traxxas Slash 2WD and other vehicles. FEATURES:Metal construction. INCLUDES:One Pinion GearOne Set Screw SPECS:Teeth: 28Pitch: 48

These are 5mm Nylon Locknuts by Traxxas. FEATURES:Blue anodized aluminum construction.Nylon inserts. INCLUDES:Four 5mm locknuts. SPECS:Thickness: 4.95mm (.195")

This is the Stock Replacement Clutch Shoes and Spring for the Nitro Stampede. These shoes are locatedunderneath the clutchbell. FEATURES:Black in color INCLUDES:Two clutch shoesOne wrap around...

These are the Replacement Bulkhead Cross Braces for the Traxxas E-Maxx. These Braces are located in between the bumper mounts. FEATURES:Black nylon construction INCLUDES:Two Bulkhead Cross...

This is the optional 39mm Aluminum Front Turnbuckle Set from Traxxas. FEATURES:Anodized aluminum construction, red in colorBlack nylon ball ends and steel link set INCLUDES:One 39mm red aluminum...

These bearings may be used with Traxxas vehicles or on whatever vehicle they will fit. PACKAGE INCLUDES:2-Bearings SPECS:5x8x2.5mm FEATURES:The bearing are constructed of stainless steel Replacement...