Traxxas

This is the Traxxas TQi 2.4 GHz High Output 2-Channel Radio System with Traxxas Link Enabled and TSM 2-Ch Transmitter, 5-Ch Micro Receiver) Replaces transmitter: TRA6509R

This is the Traxxas TQi 2.4 GHz High Output radio system, 4-channel with Traxxas Link Bluetooth module and TSM 4-Ch Transmitter, 5-Ch Micro Receiver) Replaces transmitter: TRA6507R

This is the Traxxas 2082 Gear Set for the 2080 Micro Waterproof Servos.These have been used in vehicles such as:1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss...

This is a Traxxas Steel Differential Ring and Pinion Gear Set for the 1/16 E-Revo, Summit, Slash, Rally, and other 1/16 Traxxas vehicles. This will fit both XL-2.5 and VXL models.Includes:One...

This is the Traxxas LaTrax Metal Differential Gear Set with Output, Spider, and Ring Gears. This is an excellent upgrade for LaTrax vehicles that originally came with plastic gears. It is a direct...

This is a bottle of Traxxas 50K Weight Diff Oil (1.75 oz / 50cc) with filler nozzle. This oil can be used to tune differentials in many Traxxas vehicles for peak performance!For use in these...

This is the Traxxas Complete Stainless Steel Suspension Hinge Pin Kit for the T-Maxx and E-Maxx trucks. These fit all versions of the T-Maxx .15, 2.5, 3.3, E-Maxx, and E-Maxx Brushless trucks. ...

This is the Traxxas Extreme Heavy Duty Front Driveshaft Assembly with Screw Pin. This is one complete shaft assembly for the left or right. This is a stock replacement on Rustler 4x4 and newer Slash...

This is set of Traxxas Rod Ends (16 long & 4 short) with 18 hollow balls and two ball screws. These are used on most Traxxas vehicles.Includes:4 short rod ends (17mm)16 long rod ends (19mm)2 ball...

These are the Traxxas TRX-4 Bronco Chrome Left and Right Side Mirrors, Retainers, and Body Clips for use on the TRX-4 Ford Bronco bodies. Chrome left and right side mirrors for the TRX-4 1979 Ford...

This is the Traxxas Bigfoot #1 Body Accessories Kit. This set includes the winch, front and rear bumpers, roll bar, light bar, engine detail, and full mounting hardware.The chrome grill is sold...

These are the Traxxas Suspension Screw Pins for the Traxxas Rustler, Stampede, and Bandit. The hinge pins hold the suspension arms to the bulkheads. Features: Durable steel...

This is the Traxxas Metal Gear Set for 2070 & 2075 Servos. This is an excellent upgrade for any vehicle using the 2070 or 2075 servo, or as a replacement for 2075X servo gears. *Gears may also be...

This is the Traxxas Aluminum Rear Chassis Brace for the 1/10 E-Revo Brushless and Summit trucks. This improves the strength at one of the weak points of these trucks when you are pushing them to the...

This is the Traxxas 18-Tooth Pinion Gear with 1.0 Mod Pitch and a 5mm Shaft Bore. Changing gear ratios can help balance acceleration and top speed for different running conditions. 18-tooth pinion...

This is a bottle of Traxxas 100K Weight Diff Oil (.7 oz / 20cc) with fill nozzle. This thick viscosity oil can be used to stiffen up differential action in many RC vehicles. Diff oil this thick is...

This is the Traxxas Fuel Line  (2 ft) SpecificationsFuel line (610mm or 2ft)24" fuel line Replacement Part ForJatoNitro RustlerNitro SlashRevoSlayer Pro 4X4T-Maxx Accessory Part ForTRX 2.5RTRX 3...

This is the Traxxas Speed Bit 3-Piece Metric Ball Hex Driver Set with 1/4" drive.  This set includes 2.0mm, 2.5mm, and 3.0mm ball end bits.  The 1/4" drive makes these perfect for use with...

This is the Traxxas Speed Bit 2-Piece Metric Ball Hex Driver Set with 1/4" drive.  This set includes 2.0mm and 2.5mm ball end bits.  The 1/4" drive makes these perfect for use with powered...

This is the Traxxas Speed Bit 4-Piece Metric Hex Driver Set with 1/4" drive.  This set includes straight tip 1.5mm, 2.0mm, 2.5mm and 3.0mm end bits.  The 1/4" drive makes these perfect for...

This is the Traxxas Stub axles, rear, heavy duty (2)/pins (2). This is Traxxas part number 6853XPart Number: 6853X / TRA6853XFits1/10 Monster Jam Trucks1/10 RallyCraniacNitro SlashRustler VXLRustler...

These are Traxxas 3x6mm Metal Washers. Each package includes 12 washers. Replacement part forDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0Ford F-150 RaptorFord Fiesta ST RallyHoss...

These are Traxxas 2.5x31.5mm Stainless Steel King Pins with E-clips for the electric Rustler and Stampede. Replace the stock screw pins with these heavy-duty steel suspension pins that are...

This is a Traxxas Revo 2.5 and 3.3 Forward Only Conversion Kit.  Because you eliminate the reverse gears, there is less rotating mass in the transmission, which lets the truck...

These are the Traxxas Rustler 4x4 Talon Extreme Tires Mounted on Black Wheels. These are pre-glued with foam inserts installed, making them a direct bolt-on for the Rustler 4x4 trucks...

This is the Traxxas Steel Top Drive Gear for the Stampede 2WD, Slash 2WD, Rustler, and Bandit vehicles.FitsBandit XL-5 & VXLRustler XL-5 & VXLSlash 2WD XL-5 & VXLStampede 2WD XL-5 & VXL

This is the Traxxas Blue Aluminum Turnbuckle set for the Rustler, Stampede 2WD, Stampede 4x4, and Slash 4x4 trucks.FEATURES: Anodized aluminum construction Blue in color Black nylon ball...

These are the Traxxas E-Revo 2 Machined Steel Drive Cups and 4x17mm Screw Pins (2). Each package includes two drive cups and two screw pins. Stock Replacement OnE-Revo 2.0

This is the Traxxas Titan 380 18-Turn Brushed Motor for use in Traxxas 1/16 scale vehicles like the 1/16 E-Revo, Summit, Slash 4x4, and Mustang.FEATURES 18 turns Used in Traxxas 1/16 scale...

This is the Traxxas TQ 2.4GHz 3-Channel Micro Receiver for use with the TQ 2.4GHz transmitter. The TQ 2.4GHz micro receiver uses an integrated LINK button for fast and easy binding. A two-color LED...

This is a 1.75 oz bottle of Air Filter Oil from Traxxas. FEATURES:Used to treat foam air filter elements to increase their filtering capacity, and extend engine life.1.75 fluid ounce bottle provides...

This is a set of four Traxxas Blue-Anodized Aluminum 4mm Lock Nuts with a Flanged and Serrated surface. Lightweight and great looking, these 4 mm anodized aluminum flanged lock nuts are the perfect...

This is the Traxxas Receiver Switch Harness with Charge Jack for Traxxas Nitro vehicles like the T-Maxx 2.5 and 3.3, Nitro 4-Tec, Nitro Rustler, and Nitro Stampede.FitsNitro 4-TecNitro RustlerNitro...

This is the Traxxas XRT Rear (Lower) Bulkhead Includes(4) Steel Motor Mount Washers(4) 4x18mm BCS Replacement Part ForXRTXRT Ultimate

This is the Traxxas X-Maxx Rear (Upper & Lower) Bulkhead Replacing Parts #7727 & #7728 Requires: #5108 Ball Bearings (2) Includes(4) Steel Motor Mount Washers(4) 4x18mm BCS Replacement Part...

This is a set of Traxxas Black 5mm Flanged Steel Serrated Nylon Locking Nuts (8) Set of eight 5 mm black flanged serrated steel nylon locking nuts Accessory Part ForMaxx SlashMaxxUnlimited Desert...

This is the Traxxas 400 Digital High-Torque Brushless Metal Gear Ball Bearing Waterproof Servo. With 400 oz/in of torque, this is an awesome upgrade for Traxxas 1/10 bashers and off road vehicles...

This is the Traxxas E-Revo 2 Roof Body Skid Plate with 3x12mm Capscrews (4).Stock Replacement OnE-Revo 2.0

This is the Traxxas 4mm Nylon Locking Wheel Nuts (8) Set of eight 4 mm nylon locking nuts feature a serrated flange to keep them snug on the wheel during intense action FEATURES Steel serrated...

This is a 48P, 83T Spur Gear for models with Traxxas Torque Control Slipper Clutch. FEATURES:48 pitch83 toothDesigned for models with a slipper clutch.Black plastic construction INCLUDES:One spur...