Traxxas

This is a pair of Traxxas Unlimited Desert Racer 139mm GTR 1.146 Rate Green Stripe Progressive Shock Springs.Stock Replacement OnUnlimited Desert Racer (UDR)

This is a set of Traxxas LiPo Battery Charge Indicator Plug Set. The set includes four Green, four Blue, and four Grey indicator plugs. Use these plugs to know which batteries are fully charged,...

This is the Traxxas Spring, shock (GTR) (3.2 rate, purple) (1/16 Summit) (1 pair). This is Traxxas part number 7246Part Number: 7246 / TRA7246Fits1/16 Grave Digger1/16 SummitMore detail coming soon!...

This is the Traxxas Green Front Bumper, Mount, and Hardware for the Stampede 2WD, Craniac, Skully, and 1/10 Monster Jam Trucks.Fits1/10 Monster Jam TrucksCraniacSkullyStampede 2WD

This is a set of four Traxxas Green-Anodized Aluminum 4mm Lock Nuts with a Flanged and Serrated surface.Features May be used in any application requiring this size locknut Serrated rear section...

This is the Traxxas 2-piece Receiver and Battery Hold Down Kit for the Stampede VXL OverviewIncludes battery hold-down (grey) (1), receiver hold-down (grey) (1), metal posts (2), spacers (2),...

This is the Traxxas TRX-4 2021 Ford Bronco Cyber Orange Body Complete. Pro Scale 2021 Ford Bronco bodies come fully-painted with pre-assembled body accessories for easy mounting on your...

This is the Traxxas TRX-4 2021 Ford Bronco Rapid Red Body Complete. Pro Scale 2021 Ford Bronco bodies come fully-painted with pre-assembled body accessories for easy mounting on your TRX-4...

This is the Traxxas TRX-4 2021 Ford Bronco Clear Body.  Traxxas clear bodies come fully-trimmed with pre-drilled body holes for easy mounting. There's also a protective overspray film applied to...

This is the Traxxas 5000mAh 14.8v 4-Cell 25C LiPo Battery (155mm). These can be used in the Maxx 4S, Unlimited Desert Racer (UDR) and X-Maxx 8S trucks.FitsMaxx 4SUnlimited Desert Racer (UDR)X-Maxx...

This is the Traxxas Unlimited Desert Racer Battery Door, Strap, Retainers and Latch.Stock Replacement OnUnlimited Desert Racer (UDR)

This is the Traxxas 15-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear. The...

This is a Traxxas Revo Big Block Installation Kit.  This fits the Revo 2.5 and 3.3.  This kit allows Revo owners the option of installing various .21-.28 size engines...

This is a Traxxas Revo 40-Tooth Spur Gear.  This will fit the Revo 2.5 and 3.3 trucks.  The lower the number of teeth on the spur gear, the higher top end speed you will have...

This is the Traxxas 28-T Pinion Gear (Hardened Steel) 1.0 Metric Pitch The 28-tooth pinion gear (1.0 metric pitch) is machined from hardened steel for extra durability and fits 5 mm motor shafts...

This is the Traxxas Maxx Slash Complete LED Light Kit High-Intensity Maxx Slash LED Light Kit Built Maxx Tough!Maxx Slash redefines speed, durability and toughness with its innovative design and...

This is the Traxxas Rustler VXL ProGraphix Painted Body From mild to wild, choose your own colors to personalize your body. The detailed graphics are fully painted, but the rest of the body is clear,...

This is the Traxxas Unlimited Desert Racer Fox Edition Body Decal Set.Stock Replacement OnUnlimited Desert Racer (UDR)

This is a pair of Traxxas Unlimited Desert Racer BFGoodrich Baja KR3 Tires on Black/Orange Desert Racer Wheels. The tires are pre-mounted with foam inserts installed. Stock Replacement OnUnlimited...

This is the Traxxas replacement ESC cooling fan for the VXL-8s speed control. Fits VXL-4s, VXL-6s & VXL-8s Replacement Part ForE-Revo VXL BrushlessMaxxUnlimited Desert RacerX-MaxxXRT Accessory...

These are the Traxxas X-Maxx and XRT Suspension Pin Retainers. This includes four pin retainers.Features Molded composite plastic construction Installs with inner suspension pins on upper suspension...

This is the Traxxas X-Maxx Lower Left Suspension Arm. This arm can be used on the front or rear of the truck.Features Molded composite plastic construction Fits lower left front or left rear...

This is the Traxxas X-Maxx Lower Right Suspension Arm. This arm can be used on the front or rear of the truck.Features Molded composite plastic construction Fits lower right front or right rear...

This is the Traxxas Receiver Battery Wiring Harness with On/Off Switch and Charge Jack for the Revo and Slayer nitro trucks. This can be used with other nitro vehicles using rechargeable receiver...

These are Traxxas 3x12mm Button Head Screws (6). Features: Steel Construction Black in color Hex head Includes: Six button head screws Specifications:Length: 12mm (.47")Diameter: 3mm (...

This is the Traxxas Bigfoot #1 Clear Body (Requires #3747 Body Support for Clipless Mounting) From mild to wild, Traxxas clear bodies are your own personal canvas. You choose the color and design and...

This is the Traxxas Unlimited Desert Racer 6061-T6 Aluminum Center Rear Driveshaft with Two 3mm Screw Pins.Stock Replacement OnUnlimited Desert Racer (UDR)

This is the Traxxas 4 AA Battery Holder for Receivers in Nitro vehicles like the Jato, Nitro Rustler, T-Maxx, and others. Jato 4 AA battery holder with Futaba-style connector. No On/Off switch...

This is the Traxxas Gear, 11-T pinion (32-p) (mach. steel)/ set screw. 11-tooth pinion gear (32-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the...

This is the Traxxas Differential Gear Set with diff output gears, spider gears, spider gear shaft, and diff carrier support. This fits 1/10 E-Revo, Revo 3.3, Summit, E-Maxx, T-Maxx, and Slayer...

This is a set of ten Traxxas PTFE-coated 6x8x0.5mm washers (10).Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitNitro SlashRevo 3.3SlayerSlayer ProS-MaxxSportmaxxT-Maxx 2.5T-Maxx 2.5RT-Maxx 3.3

This is a pack of Traxxas 4x12mm Countersunk Machine Screws (100-degree). Each package includes six screws.Fits:1/10 Monster Jam TrucksBandit XL-5CraniacRustler XL-5SkullyStampede XL-5 2WD

This is an assortment of e-clips, c-clips, and body clips for the Traxxas line of cars and trucks. Includes: 28 of the 2.5mm E-clips, 2 of the 3mm E-clips, 3 of the 5mm E-clips, 4 of the shock...

This is the 25-tooth Pinion Gear (48-pitch) with Set Screw 25-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of...

This is a pair of Traxxas 2.8" Mounted Alias Rear Tires on All Star chrome wheels. These are perfect for the rear of the Traxxas Rustler XL-5 and VXL vehicles. FEATURES:2.8" All Star chrome...

This is the Battery Expansion Kit for the Traxxas Rustler and Stampede 2WD, and Monster Jam trucks. It will fit both the XL-5 brushed and VXL brushless models. The package includes hardware to raise...

This is the Traxxas Rustler 4x4 Black Wing with 3x8mm Flathead Capscrews (3).Stock Replacement OnRustler 4x4 BrushedRustler 4x4 VXL

This is a full set of four Traxxas 1.9" Response Tires Pre-Mounted on Split Spoke Black Chrome Wheels for the Traxxas 4-Tec 2.0 cars. Foam inserts are pre-installed as well. The set includes two...

This is the Traxxas 16-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear.Accessory...

This is the Traxxas 14-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear...