Traxxas

This is a set of Traxxas LiPo Battery Charge Indicator Plug Set. The set includes four Green, four Blue, and four Grey indicator plugs. Use these plugs to know which batteries are fully charged,...

This is the Traxxas Drive Dog and Set Screw for the Spartan and DCB M41 Boats. Drive dog with stainless 4x3 mm grub screwReplacement Part ForDCB M41 WidebodyDisruptorSpartan SRSpartan

This is the Traxxas Boat Stand for use with the Spartan and Blast boats. Display your Traxxas V-bottom boat securely with this multi-configuration boat stand. FeaturesBlack plastic constructionFour...

This is the Traxxas 4-Amp DC Charger. This charger can be used with 6-cell 7.2V and 7-cell 8.4V NiMH Traxxas iD Batteries.FeaturesTraxxas's iD technology automatically configures and optimizes...

This is the Traxxas iD LiPo Battery Balance Adapter for Cell Voltage Checkers. This works with 2S, 3S, and 4S ID LiPo batteries to connect them to cell voltage checkers for individual cell reading...

This is the Traxxas 2056 High-Torque Waterproof Servo   High-Torque Waterproof Servo 80 oz-in torque Transit time 0.23 sec/60°   Replacement Part For Bandit BIGFOOT No. 1 Officially...

This is the Traxxas Rudder Mount and Rudder Pivot Blue-anodized aluminum rudder mount and rudder pivot Includes(4) Stainless 4x14 mm Mounting Screws(2) 4 mm Locknuts Accessory Part ForSpartan SR

This is the Traxxas Steel Propeller (42x59mm) with M4x0.7 NL Upgrade your Spartan or DCB-M41 with this high-performance steel 42x59 mm prop. Includes locknut. M4x0.7 NL *Spartan SR requires TRA5742X...

This is the Traxxas LiPo cell voltage checker and balancer with the #2938X adapter for use with Traxxas iD batteries. This can be used to check cell voltages on 2S, 3S, and 4S Traxxas ID LiPo...

This is the Traxxas Curved Tip Heavy Duty Body Scissors for cutting and trimming polycarbonate RC bodies. To do a good job on a custom body, the right tools are a must. Having both a curved tip and...

These are Traxxas 4mm Stainless Locking Nuts. These will fit many different Traxxas vehicles, and are a great item to keep in your toolbox.Features:Stainless steel construction.Nylon insert...

This is the Traxxas Spartan SR Rudder (100mm) Replacement 100 mm blue anodized aluminum rudder Replacement Part ForSpartan SR

This is the Traxxas Receiver Box Seal Kit with O-ring, Seals, and Silicone Grease. This is for use on with the 3628 waterproof receiver box. Refresh your 3628 sealed receiver box with this seal kit...

This is the Traxxas Spartan SR Stuffing tube (Assembled with Liner) Replacement stuffing tube comes assembled with liner Replacement Part ForSpartan SR

This is the Traxxas Stainless Steel Hardware Kit for Spartan SR and Disruptor Contains all stainless steel hardware used on the Disruptor or Spartan SR boats. Replacement Part ForDisruptorSpartan SR

This is the Traxxas Premium Large Rubber Overmold Speed Bit Handle with 1/4" Drive for use with Traxxas Speed Bit Metric Hex/Allen and Nut Driver tips. The large speed bit handle holds bits securely...

This is the Traxxas Aluminum Handled Body Post Hole Reamer with Cap for Lexan RC bodies.  With a crisp steel cutting edge and included aluminum cap for protection, this is not your average body...

This is the Traxxas Spartan SR 6.5x10x0.5mm PTFE-coated Washers Set of six 6.5x10x0.5 mm PTFE-coated washers. Requires: #10328 and #10385 for complete installation Replacement Part ForSpartan SR

This is the Traxxas Spartan SR Propeller Shaft and Flex Cable Replacement propeller shaft and flex cable Requires: #10328 and #10385 for complete installation Replacement Part ForSpartan SR

This is the Traxxas Spartan SR Drive Strut Replacement blue anodized aluminum drive strut. Requires: #10328 and #10385 for complete installation Replacement Part ForSpartan SR

This is a tube of Traxxas Marine Grease (30cc) for use on RC boats like the Traxxas Spartan. This is a must-have accessory to keep the flexshaft of your boat in good condition and performance at its...

These are Traxxas 3x10mm Hex Screws (6). Features: Steel construction cap head with hexagon socket drive insert Metal lock washers Includes:(6) Screws(6) Lock Washers(1) Hex...

This is the Traxxas Spartan SR Quick-Release Motor Collet with Hardware and Wrenches Replacement quick-release motor collet includes 4x3 stainless grub screw with applied threadlock and (2) 10 mm...

This is the Traxxas Telemetry Trigger Magnet for the Traxxas TQi Telemetry System. Replacement 5x2 mm telemetry trigger magnet.IncludesOne Telemetry Trigger Magnet for the Traxxas TQi Telemetry...

This is the Traxxas Spartan SR Rudder Mount with Steering Arm and Drive Strut Mount Replacement rudder mount includes steering arm, drive strut mount, and stainless hardware Replacement Part...

This is the Traxxas Spartan SR Rudder Pushrod with Servo Horn Replacement rudder pushrod with servo horn and stainless 3x22 mm screw and 3x15 mm screw Replacement Part ForSpartan SR

This is the Traxxas Spartan SR Telemetry Expander Mount Use the telemetry expander mount to secure the optional TQi Telemetry Expander to your Spartan SR. Accessory Part ForSpartan SR

This is the Traxxas Spartan/Spartan SR Bow eye Replacement hull bow eye Replacement Part ForSpartan SRSpartan

This is the Traxxas Hatch Nut/Mounting Set Replacement hatch nut set includes four standard hatch nuts and four wingnuts along with (4) O-rings and (4) Stainless 3x8 mm screws Replacement Part...

This is the Traxxas Hatch Mounts (4) Set of four replacement hatch mounts with 3x8 mm stainless screws (9) Replacement Part ForDisruptorSpartan SR

This is the Traxxas Telemetry Trigger Magnet Holder with Magnet The telemetry trigger magnet holder secures the magnet to the motor coupler to provide RPM data for the optional RPM sensor. Includes:...

This is the Traxxas LiPo cell voltage checker/balancer. This voltage checker and balancer requires the #2938X adapter if you are using it with Traxxas iD batteries.Use the LiPo battery checker...

This is the Traxxas Spartan SR Electronics Tray with RPM Mount and Stuffing Tube Clamp and Hardware Replacement electronics tray includes receiver box cover, seals, stuffing tube clamp, and stainless...

These are the Traxxas Trim Tab Adjusters with Hardware. Blue-anodized aluminum trim tab adjusters fit over the existing stainless trim tabs. The stainless adjustment screws removes all the guesswork...

This is a pair of Traxxas Spartan Blue Aluminum Drive Strut Mounts. Blue-anodized aluminum drive strut mounts (2) Accessory Part ForSpartan SRSpartan

This is the Traxxas Stainless Steel Trim Tab and Hardware set for the Spartan and DCB M41 boats. Trim tabs (2) with 4x12 mm stainless screws (4)Replacement Part ForDCB M41 WidebodySpartan SRSpartan

This is the Traxxas Hatch Nut Tool for Spartan SR and Disruptor Hatch nut tool for #10318 hatch nuts Replacement Part ForDisruptorSpartan SR

This is the Traxxas Spartan SR Pushrod Seal and Stuffing Tube Seal Replacement steering pushrod seal and stuffing tube seal Replacement Part ForSpartan SR

This is the Traxxas Spartan SR Battery Straps (325mm) (3) Set of three 325 mm hook-and-look battery straps Replacement Part ForSpartan SR

This is the Traxxas Hatch Wing Nuts Set of four replacement hatch wingnuts Replacement Part ForDisruptorSpartan SR