Traxxas

This is the Traxxas Slash Front and Rear Latch Mounts and Retainers (Left & Right) Complete set of front and rear latch mounts and retainers for 1/10 scale Slash clipless bodies. Extra-wide...

These are Traxxas 12x18x4mm Black Rubber Sealed Ball Bearings (2). Each package contains two bearings. Includes: a Pair of 12x18x4 mm black rubber seal ball bearings. A step above blue-seal...

This is the Traxxas Linkage, steering (3x20mm turnbuckle) (1)/ rod ends (2)/ hollow balls (2). This is Traxxas part number 6846Part Number: 6846 / TRA6846FitsSlash 2WD VXLSlash 2WD VXL (low CG)Slash...

This is a pair of Traxxas GTR Shock Springs (Long .767 Black) for 1/10 Slash Ultimate & Platinum trucks with GTR shocks. Shock springs for 1/10 scale long GTR shocks use high-quality spring steel...

This is the Traxxas Telemetry Trigger Magnet for the Traxxas TQi Telemetry System. Replacement 5x2 mm telemetry trigger magnet.IncludesOne Telemetry Trigger Magnet for the Traxxas TQi Telemetry...

This is the Traxxas Driveshaft U-Joint Rebuild Kit The driveshaft U-joint rebuild kit rebuilds 2 driveshafts. Includes(4) Carriers (4) Cross Pins(4) Headed Pins(2) Screw Pins(2) Hex Pins(6)...

This is the Traxxas Foam Body Washers - 2mm/3mm/4mm Adhesive-backed foam body washers help protect your custom paint work by providing a cushion between the body and body post for more secure...

This is the Traxxas 3x8mm Hex Cap Screws with Washers Upgrade your Phillips-head motor mount screws with these 3x8 mm cap-head machine screws and washers. Includes wrench. Includes (6) Washers (6)...

This is the Traxxas Motor mount, 6061-T6 aluminum (blue-anodized). The aluminum motor mount is precision-machined from solid 6061-T6 alloy for extra rigidity and total power transfer in high-power...

This is the Traxxas Caster blocks (c-hubs), 6061-T6 aluminum, left & right (red-anodized). Left and right red aluminum caster blocks improve the appearance, ruggedness, and control of your...

This is the Traxxas Stub axle, front, steel-splined constant-velocity (1)Replacement front stub axle for Traxxas steel CV driveshafts (6851R)Accessory Part ForHoss 4X4 VXLRustler 4X4 VXLRustler...

These are the Traxxas 3x15mm Cap-Head Hex Machine Screws. Each package includes six screws. These are used as head bolts on TRX 2.5 engines, and also on other areas of many vehicles.Replacement part...

This is the Traxxas Blue Aluminum 17 mm Splined Wheel Hub Adapters (4) These 17 mm hex adapters make it easy to install a wide range of wheel and tire combinations on your Traxxas vehicle...

This is the Traxxas Blue Aluminum Rear Shock Tower for the Slash 4x4, 1/10 Rally, Stampede 4x4, and Telluride trucks. Made of precision-machined 7075-T6 aluminum and anodized blue, these look great...

This is a Traxxas Rear Shock Tower for the Slash 4x4 and Stampede 4x4 trucks.FEATURES:Hardened plastic constructionBlack in colorINCLUDES: One rear shock towerREQUIRES: Installation on...

This is the Traxxas Bellcrank Bushings (Plastic) set (5x8x2.5mm) (4) Includes: Set of four 5x8x2.5 mm bellcrank bushings

This is the Traxxas Slash 4X4 Decal Sheet Pre-cut adhesive Slash 4X4 decals Accessory Part ForSlash 4X4 UltimateSlash 4X4 VXLSlash 4X4 UltimateSlash 4X4 VXL EHD

This is the Traxxas Orange Motor Plate This brightly-anodized aluminum motor plate keeps your motor tight during intense high-flying action with a touch of style. Replacement Part ForJato 4X4...

This is the Traxxas Extreme Heavy-Duty Upgrade Kit, Blue #9080XThe Traxxas Extreme Heavy-Duty Upgrade Kit transforms your already-tough Hoss 4X4, Rustler 4X4, or Slash 4X4 into the ultimate bashing...

This is the Traxxas Extreme Heavy-Duty Upgrade Kit, Orange #9080TThe Traxxas Extreme Heavy-Duty Upgrade Kit transforms your already-tough Hoss 4X4, Rustler 4X4, or Slash 4X4 into the ultimate bashing...

This is the Traxxas Extreme Heavy-Duty Upgrade Kit, Red #9080RThe Traxxas Extreme Heavy-Duty Upgrade Kit transforms your already-tough Hoss 4X4, Rustler 4X4, or Slash 4X4 into the ultimate bashing...

This is the Traxxas Extreme Heavy-Duty Upgrade Kit, Green #9080GThe Traxxas Extreme Heavy-Duty Upgrade Kit transforms your already-tough Hoss 4X4, Rustler 4X4, or Slash 4X4 into the ultimate bashing...

This is the Traxxas Extreme Heavy-Duty Upgrade Kit, Black #9080The Traxxas Extreme Heavy-Duty Upgrade Kit transforms your already-tough Hoss 4X4, Rustler 4X4, or Slash 4X4 into the ultimate bashing...

This is the Traxxas Metal Gear Set for 2270 Servo Replacement metal gear set for the 2270 steering servo. *Does not fit other servos. Replacement Part ForTRX-4 Equipped with Traxx Accessory Part...

This is the Traxxas Servo Case / Gaskets for Servo 2270.  Replacement servo case for the 2270 steering servo. Includes hardware.   Replacement Part ForTRX-4 Equipped with Traxx Accessory...

This is the Traxxas High-Torque Digital Metal Gear 2270 Servo High-Torque Digital Metal Gear ServoThe waterproof, high-torque 2270 servo is the perfect upgrade for 1/10 scale vehicles. With 236 oz-in...

This is the Traxxas Motor Plate This brightly-anodized aluminum motor plate keeps your motor tight during intense high-flying action with a touch of style. Replacement Part ForFord Fiesta ST...

These are Traxxas 2.5x8mm Cap Head Screws (6). Features: Steel construction Black in color Cap head design Includes: (6) 2.5x8mm cap head screws Specifications:Length: 5/16" (8mm)Diameter: 3/32" (2...

This is the Traxxas Fiberglass Go-Pro Camera Mount Fiberglass camera mount for Slash 4X4 Accessory Part ForSlash 4X4 VXLSlash 4X4Slash 4X4 VXL EHD

This is the Traxxas Steel Hex Wheel Hubs with Axle Pins 12 mm steel wheel hex hubs provide superior strength and durability for high-horsepower applications. Accessory Part ForHoss 4X4 VXLRustler 4X4...

This is the Traxxas 2072A Gear Set for 2070 and Waterproof 2075 Servos.  This is the stronger dark grey gear set for improved durability over the white gears. *Does not fit 2075 metal-gear...

This is the Traxxas LiPo cell voltage checker/balancer. This voltage checker and balancer requires the #2938X adapter if you are using it with Traxxas iD batteries.Use the LiPo battery checker...

This is the Traxxas Cover, gear/ motor wire hold-down clip. Replacement gear cover with motor wire hold-down clip Replacement Part For BIGFOOT 4X4 Brushless Officially Licensed ReplicaFord F-150...

These are Traxxas 2.5x5mm Button-Head Hex Machine Screws. Each package contains six screws. Replacement part forBandit VXLFord Fiesta ST RallyHoss 4X4 VXLRustler 4X4 VXLRustler 4X4Rustler VXLSlash...

These are the Traxxas XX-Long Titanium-Nitride Coated Hardened Steel Shock Shafts. Each package includes two shocks shafts. These XX-long hardened steel shafts have a super tough titanium nitride...

This is a set of Traxxas Threaded Rods (20mm, 25mm, & 44mm), and a 12mm Set Screw.Includes20mm Threaded Rod25mm Threaded Rod44mm Threaded Rod12mm Set Screw Replacement Part ForBandit...

These are the Traxxas Hardened Steel Titanium-Nitride Coated Shock Shafts. These are an excellent upgrade for many Traxxas vehicles.Includes: Two shaftsSpecificationsDiameter: 3mm (0.118")Length: 47...

These are the Traxxas Slash 4X4 Progressive Shock Springs: Rear, +10% Rate, Pink (2) Pair of XX-long progressive-rate springs are custom-wound to provide responsive control over small bumps, with a...

This is the Traxxas Blue Aluminum Front Shock Tower for the Slash 4x4, Stampede 4x4, 1/10 Rally, and Telluride vehicles. Insist on the only aluminum shock towers that are by Traxxas, for Traxxas. ...

This is the Traxxas Extreme Heavy-Duty Steel CV Driveshaft Rebuild Kit Rebuild your Traxxas extreme-duty steel CV driveshafts with this kit. Each kit contains the pins and hardware to rebuild one...