Traxxas

This is the Long Temperature and Voltage Sensor for the Traxxas TQi system. To read voltage on electric vehicles, this must be used with the Traxxas part TRA6541 Power Tap. The temperature/voltage...

This is a package of replacement Traxxas 5x8mm Teflon Washers  Set of 20 PTFE-coated 5x8x0.5 mm washers for use with bearings. FEATURES:Black teflon construction.Used on the axles and in the...

These are rubber cap diaphragms for Traxxas plastic shocks. These also work well with some Associated aluminum shocks. Replacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit...

These are the Shoulder Screws for the Traxxas T-Maxx 3.3. Set of six 3x12 mm shoulder screws (shock attachment screws) with hex-drive heads. FEATURES Black steel construction INCLUDESSix steel...

This is the Traxxas 2-Channel Wireless-Ready TQi 2.4 GHz Transmitter Transmitter, TQi Traxxas Link enabled, 2.4GHz high output, 2-channel (transmitter only)

This is the Traxxas TQi Transmitter Traxxas Link Enabled 2.4GHz High Output 3-Channel (Transmitter Only) TransmitterTQi Traxxas Link enabled, 2.4GHz high output, 3-channel

This is the Traxxas TQ 2.4GHz 2-Channel Transmitter.   (Transmitter Only) Switch on the power and drive! That's all there is to it with the TQ 2.4GHz radio. There are no frequencies to...

This is the Traxxas TQ 2.4GHz 3-Channel Transmitter.   (Transmitter Only) Switch on the power and drive! That's all there is to it with the TQ 2.4GHz radio. There are no frequencies to...

This is the Traxxas 7.2V 3000mAh NiMH Battery with iD Connector. This is stock replacement battery for the Traxxas Blast boat.Features:New high current connector with gold-plated copper terminalsiD...

This is the Diff Carrier/Gasket Set Replacement differential carrier includes X-ring gaskets (2), ring gear gasket, and 6x10x0.5 mm washer. FEATURES:Plastic Diff CarrierBlue Rubber Shaft GasketsBlack...

This is the Traxxas 5000mAh 7.4v 2-Cell 25C LiPo Battery (short/137mm). This new shorter design allows this 2S 5000mAh pack to fit in tighter compartments, making it a great option for Stampede 2WD,...

These are the Traxxas 3655X Left and Right Suspension Arms, for the Rustler (rear), Stampede 2WD (rear), Stampede 4x4 (front/rear), Slash 4x4 (front/rear), 1/10 Rally (front/rear), 1/10 Monster Jam...

This is the Diff Oil Kit for the Revo by Traxxas. Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential by using higher or lower...

This is a pair of Traxxas Slash Paddle Tires Mounted on Chrome Wheels. These fit the Slash 4x4 front and rear, or the Slash 2WD rear. Put these on your truck for added grip on sand, snow, mud, or the...

This is a set of Traxxas Stub Axle Pins.  These pins slide through the axle and keep the wheel hexes from spinning on the axle. Set of four replacement stub axle pins

This is the Traxxas Antenna Cap Set with Antenna Spool. The antenna spool is used for wrapping excess antenna wire before inserting it in the antenna tube to prevent wire from hanging out the end of...

This is the Traxxas Rear Steel-Spline Constant-Velocity Driveshafts (Complete Assembly) (2) Traxxas steel constant velocity driveshafts offer the ultimate in torque handling and efficient power...

This is pack of Traxxas DC Charger 5-Amp Fuses (2). These are replacements for use in the 2-amp and 4-amp DC 12-volt cigarette-lighter style quick chargers included with many of the Traxxas electric...

This is the Traxxas 6-Cell 7.2V 4200mAh iD NiMH Battery Pack. This is a great way to extend the run-time on the Traxxas Blast boat. This can also be used in vehicles like the Slash, Rustler,...

This is a set of Traxxas 10x15mm Ball Bearings for use on the Traxxas Revo and other vehicles. Features: Steel Construction Shielded with blue rubber seals Includes: Two Ball...

This is a Traxxas Steel Slipper Clutch Shaft for the Slash, Rustler, and Stampede vehicles. Features: Steel construction Roll pin pre-installed Includes: One slipper clutch...

This is the Traxxas aluminum blue-anodized shock caps Aluminum shock caps are great way to boost the durability and style of any Traxxas vehicle equipped with Ultra Shocks. The machined caps fit...

This is a set of 12 Traxxas 3mm Locking Nuts. These feature chrome nylon locking nuts. Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 SummitBandit VXLBIGFOOT No. 1 Officially...

This is the Traxxas 2075X Digital High-Torque Metal Gear Waterproof Ball Bearing Servo. This is the stock steering servo on the TRX-4 Trail Crawler. It can be used as an upgrade for any 1/10 Traxxas...

This is a set of Traxxas Long Rod Ends with Hollow Ball Connectors. Each package contains six rod ends and six hollow balls.Fits1/10 Monster Jam Trucks1/10 RallyBandit XL-5CraniacE-MaxxNitro...

This is the Traxxas Temperature Sensor Mount for Electric Motors when using the TQi Telemetry System. Includes: Mount, Plastic Tie, and Thermal Pad The temperature sensor mount secures the...

This is the Traxxas Alloy Slipper Pressure Plate and Hub for the Revo 2.5, 3.3, E-Revo, E-Revo Brushless, E-Maxx 16.8V, and E-Maxx Brushless trucks. These are part of the slipper assembly.

This is a Traxxas M0.8P, 52T Spur Gear. FEATURES M0.8 pitch 52 tooth Black plastic construction Compatible with 32P pinion gears INCLUDESOne M0.8P, 52T Spur Gear SPECSPitch:   M0...

This is the Traxxas Velineon 3500 4-Pole Brushless Waterproof Motor. This is the replacement motor found in many of the 1/10 brushless trucks, designed for use with the VXL-3s ESC. See full list of...

This is the Traxxas Rear Center Drive Hub and Set Screw for 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, Rally, Telluride, and XO-1 vehicles. Rear center drive hub with 4x3 mm grub screw.

These are the Traxxas 6061-T6 Orange Aluminum Steering Blocks for 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, and Rally vehicles. Traxxas aluminum steering blocks combine total steering accuracy with...

These are the Traxxas 6061-T6 Orange Aluminum Caster Blocks for 4x4 Slash Stampede Rustler. Left and right orange aluminum caster blocks improve the appearance, ruggedness, and control of your...

This is the Traxxas Orange Aluminum Rear Stub Axle Carriers (2) Traxxas aluminum stub axle carriers add the strength of 6061-T6 alloy with a beautifully-anodized finish without compromising their...

This is the Traxxas 54-Tooth 0.8 Mod Spur Gear for use with Center Differentials in the Slash 4x4, Stampede 4x4, and 1/10 Rally vehicles. These are 0.8 metric pitch, compatible with 32-pitch. The...

This is the Traxxas Hinge Pin Screw Set for the Slash 2WD, Slash 4x4, Rustler, Stampede 2WD, and Bandit vehicles.Includes:Two 3mm x 46mm screw pinsTwo 3mm x 40mm screw pinsTwo 3mm x 29mm screw...

This is the Traxxas 330 Digital High-Torque Coreless Metal Gear Ball Bearing Waterproof Servo, with an output of up to 330 oz/in of torque.High-Torque 330 Blue ServoThe Traxxas High-Torque 330 Blue...

This is a Package of 3x12x5mm Shoulder Screws for many Traxxas Vehicles. Set of six 3x12 mm shoulder screws (shock attachment screws) with Phillips-drive heads. SPECSLength: 12mm (.47")Diameter: 3mm...

This is the Traxxas Stub axle, rear, steel-splined constant-velocity (1)Replacement rear stub axle for Traxxas steel CV driveshafts (1951R, 6852R)Accessory Part For:BIGFOOTHoss 4X4 VXLNitro...

These are the Traxxas Hardened Steel Front Driveshafts for the Traxxas 1/10 Scale Slash 4x4, Rally, and Stampede 4x4 vehicles. Traxxas Steel Constant Velocity Shafts offer the ultimate in torque...

This is a Traxxas M0.8P, 50T Spur Gear. FEATURES M0.8 pitch 50 tooth Black plastic construction Compatible with 32P pinion gears INCLUDESOne M0.8P, 50T Spur Gear SPECSPitch:   M0...