Traxxas

This is the Traxxas Speed Bit 3-Piece Metric Hex Driver Set with 1/4" drive.  This set includes straight tip 1.5mm, 2.0mm, and 2.5mm end bits.  The 1/4" drive makes these perfect for use...

This is the Traxxas Heavy Duty Rear Drive Shaft Assembly for the Stampede 4x4 and Slash 4x4 trucks. FEATURES:Black plastic and steel construction INCLUDES:Rear driveshaft assemblyScrew pin REQUIRES:...

This is the Traxxas Link Bluetooth Wireless Module for use with TQi radio systems having the a TQi logo with the blue letter "i" on the face. The wireless module works with Android (v4.4 OS and...

This is the Traxxas Extreme Heavy Duty Rear Driveshaft Assembly with Screw Pin. This is one complete shaft assembly for the left or right. This is a stock replacement on Rustler 4x4 and newer Slash...

This is Traxxas Ultra Premium RC Tire Glue. Only one tire glue is certified for use with the 100+mph XO-1: Traxxas Ultra Premium Tire Glue. The XO-1 relies on a high-strength tire bond to withstand...

This is the Traxxas 5000mAh 8.4V 7-Cell NiMH Hump Battery Pack with the iD Connector. This battery is perfect for vehicles like the Bandit, Rustler, Stampede, Stampede 4x4, Monster Jam trucks,...

This is the Traxxas Phone Mount for Traxxas TQi and Aton Transmitters. The Transmitter Phone Mount provides a secure mounting base for your mobile device when using it for the Traxxas app.

This is the Traxxas Fox Edition Painted Slash Body Assembled with Front & Rear Latches for Clipless Mounting Is it time to replace your Slash body or upgrade to an all-new look? These clipless...

This is the Traxxas Power Cell 11.1V 6400mAh 25C 3S iD LiPo Battery with iD Connector. Traxxas 6400mAh 3S Power Cell LiPo packs are ideal for Rustler VXL, Stampede VXL, Stampede 4x4 VXL, and Bandit...

This is the Traxxas Titan 550 12 Turn Electric Motor for vehicles like the Slash, Stampede, Rustler, and Bandit.  The Titan 12T 550 modified motor is designed for incredible mod-motor power...

This is the Traxxas BL-2s 3300 Brushless Motor BL-2s Brushless MotorThe sensorless BL-2s 3300 kV motor delivers the all-day speed and torque you expect from brushless technology, without the high...

This is the Traxxas Heavy Duty Driveshaft Assembly for the Slash 4x4 and Stampede 4x4. The front heavy-duty driveshaft comes pre-assembled and ready to install with screw pin. It's a step up from...

This is the Traxxas Stub Axle Pins and Hex Wheel Hubs Includes(2) 12 mm Composite hex wheel hubs (2) Axle pins Replacement Part ForBIGFOOTDrag SlashFord F-150 RaptorFord Fiesta ST RallyHoss 4X4...

This is the Traxxas Alumimum Bearing Adapter for the Slash 4x4, Stampede 4x4, and 1/10 Rally VXL. FEATURES 6061-T6 anodized blue aluminum constructionSteel 10x15x4mm ball bearing with blue rubble...

This is the Traxxas Velineon 3500 VXL Brushless Motor Rebuild Kit. This set includes two 5x11x4mm ball bearings, four 2.5x5mm buttonhead screws with threadlock, replacement front and rear bushings,...

This is the Traxxas 2075 Digital High-Torque Waterproof Servo. This servo puts out 125 oz/in of torque at 6V. This is a stock replacement for many vehicles, and can also be used as an upgrade to the...

This is the Traxxas Male Battery Connector Set (2).  These are for use as an ESC connector. Note: 4S Traxxas ID batteries are not compatible with these connectors due to the connector shape.

This is the Traxxas Battery hold-down, tall (1)/ hold-down retainer, front & rear (1 each) (allows for installation of taller, multi-cell batteries)Extended battery hold-down with front and rear...

This is the Traxxas Steering Bellcrank Set for the Slash 2WD, Slash 4x4, 1/10 Rally, Bandit, Rustler, and Stampede 4x4 vehicles. Features: Composite nylon construction Replaces a worn or damaged...

This is the Traxxas TQi 2.4 GHz High Output 2-Channel Radio System with Traxxas Link Enabled and TSM 2-Ch Transmitter, 5-Ch Micro Receiver) Replaces transmitter: TRA6509R

This is the Traxxas TQi 2.4 GHz High Output radio system, 4-channel with Traxxas Link Bluetooth module and TSM 4-Ch Transmitter, 5-Ch Micro Receiver) Replaces transmitter: TRA6507R

This is set of Traxxas Rod Ends (16 long & 4 short) with 18 hollow balls and two ball screws. These are used on most Traxxas vehicles. Set of replacement rod ends with 16 long ends and 4 short...

These are the Traxxas Spring Retainers for Traxxas Shocks. This set contains the spring retainers that hold the springs in place over the shock body and the piston heads that control the amount of...

This is the Traxxas Speed Bit 3-Piece Metric Ball Hex Driver Set with 1/4" drive.  This set includes 2.0mm, 2.5mm, and 3.0mm ball end bits.  The 1/4" drive makes these perfect for use with...

This is the Traxxas Speed Bit 2-Piece Metric Ball Hex Driver Set with 1/4" drive.  This set includes 2.0mm and 2.5mm ball end bits.  The 1/4" drive makes these perfect for use with powered...

This is the Traxxas Speed Bit 4-Piece Metric Hex Driver Set with 1/4" drive.  This set includes straight tip 1.5mm, 2.0mm, 2.5mm and 3.0mm end bits.  The 1/4" drive makes these perfect for...

This is the Traxxas Stub axles, rear, heavy duty (2)/pins (2). This is Traxxas part number 6853XPart Number: 6853X / TRA6853XFits1/10 Monster Jam Trucks1/10 RallyCraniacNitro SlashRustler VXLRustler...

These are Traxxas 3x6mm Metal Washers. Each package includes 12 washers. Replacement part forDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0Ford F-150 RaptorFord Fiesta ST RallyHoss...

This is the Traxxas TQ 2.4GHz 3-Channel Micro Receiver for use with the TQ 2.4GHz transmitter. The TQ 2.4GHz micro receiver uses an integrated LINK button for fast and easy binding. A two-color LED...

This is a set of four Traxxas Blue-Anodized Aluminum 4mm Lock Nuts with a Flanged and Serrated surface. Lightweight and great looking, these 4 mm anodized aluminum flanged lock nuts are the perfect...

This is the Traxxas 400 Digital High-Torque Brushless Metal Gear Ball Bearing Waterproof Servo. With 400 oz/in of torque, this is an awesome upgrade for Traxxas 1/10 bashers and off road vehicles...

This is the Traxxas 4mm Nylon Locking Wheel Nuts (8) Set of eight 4 mm nylon locking nuts feature a serrated flange to keep them snug on the wheel during intense action FEATURES Steel serrated...

This is the Traxxas 2-Amp Wall Charger and 3000mAh 7-Cell 8.4V Flat Pack Battery Completer Set. This set is perfect to go with vehicles like the Slash 2WD, Slash 4x4 VXL, 1/10 Rally, TRX-4, and...

This is the Traxxas 13-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear. The...

This is the Traxxas Big Bore Shock Set for all 1/10 Scale Slash 2WD, Slash VXL, and Slash 4x4 Short-Course Trucks. These replace the plastic shocks that come stock with the truck. Big Bore shocks...

This is a pair of Traxxas 5x8x2.5mm Blue Rubber Sealed Ball Bearings. These fit a large number of Traxxas 1/10 and 1/16 scale vehicles.Includes: (2) 5X8mm ball bearingsSpecificationsInside diameter:...

This is the Long Temperature and Voltage Sensor for the Traxxas TQi system. To read voltage on electric vehicles, this must be used with the Traxxas part TRA6541 Power Tap. The temperature/voltage...

This is a package of replacement Traxxas 5x8mm Teflon Washers  Set of 20 PTFE-coated 5x8x0.5 mm washers for use with bearings. FEATURES:Black teflon construction.Used on the axles and in the...

These are the Shoulder Screws for the Traxxas T-Maxx 3.3. Set of six 3x12 mm shoulder screws (shock attachment screws) with hex-drive heads. FEATURES Black steel construction INCLUDESSix steel...

This is the Traxxas 2-Channel Wireless-Ready TQi 2.4 GHz Transmitter Transmitter, TQi Traxxas Link enabled, 2.4GHz high output, 2-channel (transmitter only)