Traxxas

This is a pair of Traxxas 5x8x2.5mm Blue Rubber Sealed Ball Bearings. These fit a large number of Traxxas 1/10 and 1/16 scale vehicles.Includes: (2) 5X8mm ball bearingsSpecificationsInside diameter:...

This is a package of replacement Traxxas 5x8mm Teflon Washers  Set of 20 PTFE-coated 5x8x0.5 mm washers for use with bearings. FEATURES:Black teflon construction.Used on the axles and in the...

This is the Aluminum Wheelie Bar Axle for the Traxxas Drag Slash. FEATURES:Charcoal Gray in color INCLUDES:(1) Wheelie Bar Axle (3x12 BCS)(2) Threadlock Hardware

This is the optional Assembled Wheelie Bar/Wheelie Bar Mount for the Traxxas Drag Slash. FEATURES:Black Chrome in color INCLUDES:One Assembled Wheelie Bar/Wheelie Bar Mount REQUIRES:Installation on...

These are rubber cap diaphragms for Traxxas plastic shocks. These also work well with some Associated aluminum shocks. Replacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit...

These are the Shoulder Screws for the Traxxas T-Maxx 3.3. Set of six 3x12 mm shoulder screws (shock attachment screws) with hex-drive heads. FEATURES Black steel construction INCLUDESSix steel...

This is the Traxxas TQi Transmitter Traxxas Link Enabled 2.4GHz High Output 3-Channel (Transmitter Only) TransmitterTQi Traxxas Link enabled, 2.4GHz high output, 3-channel

This is the Traxxas TQ 2.4GHz 2-Channel Transmitter.   (Transmitter Only) Switch on the power and drive! That's all there is to it with the TQ 2.4GHz radio. There are no frequencies to...

This is the Traxxas TQ 2.4GHz 3-Channel Transmitter.   (Transmitter Only) Switch on the power and drive! That's all there is to it with the TQ 2.4GHz radio. There are no frequencies to...

This is the Traxxas 7.2V 3000mAh NiMH Battery with iD Connector. This is stock replacement battery for the Traxxas Blast boat.Features:New high current connector with gold-plated copper terminalsiD...

This is the Traxxas 3000mAh 7.4v 2-Cell 20C LiPo Battery Traxxas Certified iD-equipped LiPo batteries provide the punch and on-demand power to reach the top speeds that Traxxas models are built to...

This is the Traxxas Red Aluminum Turnbuckle set for the Rustler, Rustler VXL, Stampede 2WD, Stampede VXL, and Bigfoot trucks.FEATURES: Anodized aluminum construction Red in color Black nylon ball...

This is a pair of Traxxas Slash Paddle Tires Mounted on Chrome Wheels. These fit the Slash 4x4 front and rear, or the Slash 2WD rear. Put these on your truck for added grip on sand, snow, mud, or the...

This is a set of Traxxas Stub Axle Pins.  These pins slide through the axle and keep the wheel hexes from spinning on the axle. Set of four stub axle pins Replacement Part For4-Tec 2.0 AWD...

This is a Traxxas 48P, 90T Spur Gear for models with Torque Control Slipper Clutch. FEATURES:48 pitch90 toothDesigned for models with a slipper clutchBlack plastic construction INCLUDES:One spur...

This is the Traxxas Antenna Cap Set with Antenna Spool. The antenna spool is used for wrapping excess antenna wire before inserting it in the antenna tube to prevent wire from hanging out the end of...

These are the optional Traxxas Orange Aluminum 59mm Turnbuckle Toe Links for the Traxxas 1/10 Slash 2WD, Rustler XL-5 & VXL trucks.Traxxas aluminum turnbuckles make it easy to add strength and...

These are the optional Traxxas Pink Aluminum 59mm Turnbuckle Toe Links for the Traxxas 1/10 Slash 2WD, Rustler XL-5 & VXL trucks.Traxxas aluminum turnbuckles make it easy to add strength and...

These are the optional Traxxas Green Aluminum 59mm Turnbuckle Toe Links for the Traxxas 1/10 Slash 2WD, Rustler XL-5 & VXL trucks.Traxxas aluminum turnbuckles make it easy to add strength and...

These are the optional Traxxas Blue Aluminum 59mm Turnbuckle Toe Links for the Traxxas 1/10 Slash 2WD, Rustler XL-5 & VXL trucks.Traxxas aluminum turnbuckles make it easy to add strength and...

This is the Traxxas Rear Steel-Spline Constant-Velocity Driveshafts (Complete Assembly) (2) Traxxas steel constant velocity driveshafts offer the ultimate in torque handling and efficient power...

This is the Traxxas 6-Cell 7.2V 4200mAh iD NiMH Battery Pack. This is a great way to extend the run-time on the Traxxas Blast boat. This can also be used in vehicles like the Slash, Rustler,...

This is the Traxxas 17mm Splined Wheel Nut Wrench. This is a must-have for vehicles equipped with 17mm wheel nuts. Use this splined wheel wrench for extra leverage on 17 mm hex nuts. Replacement Part...

This is a Traxxas Steel Slipper Clutch Shaft for the Slash, Rustler, and Stampede vehicles. Features: Steel construction Roll pin pre-installed Includes: One slipper clutch...

These are the Traxxas Red Aluminum Wheelie Bar Wheels and Rubber Tires for the Traxxas Wheelie Bars (model 4975 and 3678) for all Traxxas T-Maxx, E-Maxx, Jato, Slash 2WD, Slash 4x4, Rustler, Stampede...

These are the Traxxas Black Shock Caps with Hollow Balls (4). These come stock on the Ultra Shocks on the 4-Tec 2.0 vehicles like the Ford GT and Mustang GT, but will also work with other vehicles...

These are the Traxxas Fixed Gear Ratio Adapters for use with 2WD Electric vehicles, including Bandit, Rustler, Slash, Stampede, and Bigfoot trucks. Take the guesswork out of setting gear mesh and...

This is the Traxxas aluminum blue-anodized shock caps Aluminum shock caps are great way to boost the durability and style of any Traxxas vehicle equipped with Ultra Shocks. The machined caps fit...

This is a set of 12 Traxxas 3mm Locking Nuts. These feature chrome nylon locking nuts. Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 SummitBandit VXLBIGFOOT No. 1 Officially...

This is a set of Traxxas Long Rod Ends with Hollow Ball Connectors. Each package contains six rod ends and six hollow balls.Fits1/10 Monster Jam Trucks1/10 RallyBandit XL-5CraniacE-MaxxNitro...

This is a Traxxas 48P, 86T Spur Gear for models with Torque Control Slipper Clutch. FEATURES:48 pitch86 toothDesigned for models with a slipper clutch.Black plastic construction INCLUDES:One spur...

This is the Traxxas Temperature Sensor Mount for Electric Motors when using the TQi Telemetry System. Includes: Mount, Plastic Tie, and Thermal Pad The temperature sensor mount secures the...

This is a Pair of Stock Replacement Front Axles for the Rustler and Stampede. These are located in the front steering blocks. FEATURES Steel construction Natural color INCLUDESTwo front...

This is the Traxxas Velineon 3500 4-Pole Brushless Waterproof Motor. This is the replacement motor found in many of the 1/10 brushless trucks, designed for use with the VXL-3s ESC. See full list of...

This is the Traxxas Black HD Front Suspension Arms for 2WD Slash Rustler Stampede. Heavy-duty front suspension arms for 2WD Slash, Stampede, and Rustler incorporate our latest proprietary...

This is the Traxxas Orange HD Front Suspension Arms for 2WD Slash Rustler Stampede. Heavy-duty suspension arms for 2WD Slash, Stampede, and Rustler incorporate our latest proprietary composite...

This is the Traxxas Red HD Front Suspension Arms for 2WD Slash Rustler Stampede. Heavy-duty suspension arms for 2WD Slash, Stampede, and Rustler incorporate our latest proprietary composite...

This is the Traxxas Black HD Rear Suspension Arms for Slash 2WD, Nitro Rustler Slash Rear heavy-duty suspension arms incorporate our toughest proprietary composite material. Traxxas designed this...

This is the Traxxas Orange HD Rear Suspension Arms for Slash 2WD, Nitro Rustler Slash Rear heavy-duty suspension arms incorporate our toughest proprietary composite material. Traxxas designed this...

This is the Traxxas Red HD Rear Suspension Arms for Slash 2WD, Nitro Rustler Slash Rear heavy-duty suspension arms incorporate our toughest proprietary composite material. Traxxas designed this...