Traxxas

This is the Traxxas Front Lower Bulkhead Replacement front lower bulkhead Replacement Part ForXRT

This is the Traxxas Front Upper Bulkhead Replacement front upper bulkhead. One-piece molded composite plastic construction. Fastens to lower front bulkhead and houses output gear Replacement Part...

This is a pair of Traxxas 1/16 Geode Black Beadlock-Look Wheels with Canyon AT Tires. This pair comes with the tires pre-glued to the rims with foam inserts installed. The wheels have a 12mm hex...

This is the Traxxas 4-Tec 2.0 Red Aluminum Center Driveshaft. This is an awesome addition to any tricked out 4-Tec 2.0 show car!Accessory Part For4-Tec 2.0 VXL4-Tec 2.0 XL-54-Tec 2.0 Mustang4-Tec 2...

This is the Traxxas Stampede Hawaiian Painted Body. This comes pre-painted, trimmed, and ready for installation! These are a direct fit for Stampede XL-5 2WD, 4x4, and Stampede VXL 2WD and 4x4...

This is the Traxxas X-Maxx 8S Steel CV-Driveshaft Only. Heavy-duty 160 mm X-Maxx steel constant-velocity driveshaft for 8s-spec heavy duty drivetrain. 6s truck upgrade also requires 7751X, 7754X, and...

This is the Traxxas 24-Tooth Pinion Gear with 1.0 Mod Pitch and a 5mm Shaft Bore. 24-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let you...

This is the Traxxas 24-Tooth Clutch Bell with Fiber Washers and E-Clips. This can be used on Traxxas 1/10 nitro vehicles.Features:Fits Traxxas 1/10 scale nitro vehiclesConstructed of hardened...

These are the Traxxas Rear Alias Tires Pre-Mounted on 2.8" Black Chrome All-Star Wheels for the Rustler XL-5 and Rustler VXL trucks. These have a 12mm hex, and are designed for the rear of the truck...

This is a pair of Traxxas Front Anaconda Street Tires Pre-Mounted on Tracer Chrome Wheels for used on the Bandit XL-5 and VXL buggies. The wheels have a slotted hub on the back to slide over the pin...

This is the Front and Rear Body Mount Set for the Traxxas Slash 2WD, Stampede 2WD, and Rustler trucks.  This includes front and rear body mounts with 6.5mm, 25mm, 38mm, and 52mm body post...

This is the Traxxas Center Differential Kit for the 1/16 E-Revo, Slash, and Summit vehicles. OverviewThe optional center differential helps balance the E-Revo VXL’s power distribution to reduce front...

This is the Traxxas Rear Suspension Arm Set for use on the 1/16 E-Revo VXL 4WD. Features: Nylon construction Black in color Includes:One Lower Right Suspension ArmOne Lower Left Suspension...

This is the Traxxas Titan 775 10-Turn Motor for the Traxxas 1/10 Summit. High-torque gets its spin from the largest brushed motor offered by Traxxas, the Titan 775. This massive mill is equipped...

This is the Traxxas Wheelie Bar for 1/16 E-Revo The patented Traxxas 1/16 scale adjustable wheelie bar features four position adjustment. The wheelie bar is intended for hard, high-traction surfaces...

This is the Traxxas replacement #3631 Front Suspension Arms for for the Stampede 2WD and Rustler. FEATURES:Made from black molded nylon for the Traxxas Stampede 2WD and Rustler. SPECS:Length: 3...

This is the Blue Silicone Pipe Coupler for the T-Maxx 2.5 This goes between the tuned pipe and the header FEATURES:Blue silicone constructionFor use with pipes #5152 and #4452 INCLUDES:One pipe...

This is the Traxxas TRX-4 Sport Front Bumper (178mm wide) with Mach Winch and 2.6x8 screw.Stock Replacement OnTRX-4 Sport

These are the Traxxas Unlimited Desert Racer Center Front Driveshafts with 4mm screw pin and 3x10 Capscrew.Stock Replacement OnUnlimited Desert Racer (UDR)

This is the Traxxas 17-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear.Accessory...

This is the Traxxas Spur gear, 46-tooth (1.0 metric pitch). 46-tooth spur gear (1.0 metric pitch). Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can...

This is the Traxxas High-Volume Air Filter Body and Filter for the T-Maxx 2.5 and 3.3 nitro trucks. This comes with the filter support, cap, foam filter, T-Maxx filter base (angled), wire mount and...

This is a pair of Traxxas Green 6061-T6 Aluminum 30-Degree Castor Blocks with vertical suspension screw pins. These high-quality aluminum castor blocks are strong, precise, and look great! These...

This is the Traxxas XL-5 Waterproof Electronic Speed Control (ESC). This comes pre-wired with the Traxxas high-current connector. Designed and engineered by Traxxas, the XL-5 Electronic Speed...

These are Traxxas Aluminum Left and Right Steering Blocks for the 1/10 scale Slash 4x4, Stampede 4x4, Telluride, and 1/10 Rally vehicles. Precision-machined for total steering accuracy and...

These are the Traxxas Differential Output Yokes and Screw Pins for the Traxxas Bandit, Stampede 2WD, Slash 2WD, and Rustler trucks.FEATURESBlack plastic constructionINCLUDESTwo differntial output...

This is a Traxxas Jato 2.5 and 3.3 Engine Mount with Spacers.  This includes one silver engine mount, two engine mount spacers, four 3mm x 15mm socket head screws with washers, two 4mm x 18mm...

This is the Traxxas Magnum 272 Black Gearbox Halves (L&R) Black gearbox halves (L&R) for Magnum 272 transmission. Includes idler gear shaft. Will not fit Magnum 272R transmission.

This is the Traxxas Mini XRT LED Light Kit LED light kit, Mini XRT, complete (includes front bumper with LED lights, roof skid plate with LED lights, 3-volt accessory power supply, and power tap...

This is the Traxxas Mini Maxx LED Light Kit The Mini Maxx LED light kit is built Traxxas Tough, with factory fit and finish for easy installation. The kit includes new front and rear bumpers with...

This is the Traxxas Sub-Micro Waterproof Servo The 2065T waterproof sub-micro servo features a metal main gear for precise control and powerful steering authority. Replacement Part ForTRX-4M 1/18...

This is the Traxxas Low Profile (with Shroud) Dual Cooling Fan Kit The dual cooling fan kit adds twin fans and a low-profile shroud to the 3362X low-profile aluminum heat sink. *Fits #3491...

This is the Traxxas Sledgehammer Tires Pre-Mounted w/Foam Inserts Race Black Wheels (Left & Right) for the X-Maxx and XRT Ultra-rugged Sledgehammer tires provides extreme traction and control for...

These are the Traxxas Unlimited Desert Racer Front and Rear Planetary Gear Housing Halves.Stock Replacement OnUnlimited Desert Racer (UDR)

These are the Traxxas Unlimited Desert Racer Rear Axle Housing, Supports and Hubs.Stock Replacement OnUnlimited Desert Racer (UDR)

This is the Traxxas TRX-4 Crawler 45-Tooth 0.8 Mod Spur Gear. 45-tooth spur gear (32-pitch). Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help...

This is the Traxxas Bigfoot #1 Chrome Grill Set with decals. Whether your grill is damaged, or you're painting a new body to restore your monster to its original glory, this is the set you need for a...

This is the Traxxas 15-Tooth Pinion Gear with 1.0 Mod Pitch and a 5mm Shaft Bore. 15-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let you...

This is the Traxxas Adapter to fit a Standard Size Servo in X-Maxx and Maxx. This adapter allows you to use a standard-size high-torque servo in place of the large servo that comes on the X-Maxx and...

This is a pair of Traxxas Split Spoke 3.8" Black Chrome Wheels with 17mm Splined Hexes for use on T-Maxx, E-Maxx, Revo, E-Revo, and Summit trucks.Features 3.8" 5-split spoke wheels 17mm splined...