Traxxas

This is the Traxxas 20-Tooth Transmission Input Gear and 2.5x12mm Pin. 20-tooth transmission input gear. Includes 2.5x12 mm dowel pin.Replacement Part ForX-MaxxXRT

This is the Traxxas Stub axle, rear, steel-splined constant-velocity (1)Replacement rear stub axle for Traxxas steel CV driveshafts (1951R, 6852R)Accessory Part For:BIGFOOTHoss 4X4 VXLNitro...

These are the Traxxas Hardened Steel Front Driveshafts for the Traxxas 1/10 Scale Slash 4x4, Rally, and Stampede 4x4 vehicles. Traxxas Steel Constant Velocity Shafts offer the ultimate in torque...

This is the Traxxas Maxx Chevron Tires with 3.8" Split Spoke Wheels Maxx Chevron tires are 3.8″ inches of soft compound rubber with a wide, low-profile design for excellent off-road handling...

This is a Traxxas T-Maxx (.15, 2.5, 2.5R, and 3.3) Primerless Fuel Tank.  This is the updated version.  This tank fits all of the nitro Maxx trucks, and there is no...

These are the Traxxas E-Revo 2 Heavy Duty Toe Link Rod Ends (8) with Hollow Balls.Stock Replacement OnE-Revo 2.0

These are the Traxxas Unlimited Desert Racer Steel Hex Wheel Hubs (4).Accessory Part ForUnlimited Desert Racer (UDR)

This is a pair of Traxxas X-Maxx Replacement Upper Suspension Arms. These will work on the front or rear of the truck.FeaturesMolded composite plastic constructionFits both front and rear...

This is a Traxxas M0.8P, 50T Spur Gear. FEATURES M0.8 pitch 50 tooth Black plastic construction Compatible with 32P pinion gears INCLUDESOne M0.8P, 50T Spur Gear SPECSPitch:   M0...

This is a pair of Stub Axle Carriers for the Traxxas Bandit, Stampede and Rustler VXL. FEATURES:Molded nylon construction (black) INCLUDES:Two stub axle carriers REQUIRES:Installation on the vehicle

This is a Traxxas Jato 2.5, 3.3, and T-Maxx 3.3 Antenna Crimp Nut and Antenna Nut Wrench.  This includes the antenna crimp nut and the wrench.

This is a Traxxas 37-Tooth Ring and 13-Tooth Pinion Gear Set for the Traxxas T-Maxx .15, 2.5, 2.5R, 3.3 (model 4909 only), and E-Maxx (model 3906 only).  The differential carrier...

This is a pair of Traxxas Maxx Chevron Tires with Foam Inserts for use with 3.8" Revo and T-Maxx/E-Maxx wheels. These are a great way to give you RC the true off-road monster truck...

This is the Traxxas Bandit Wing Wire. This will fit the Bandit XL-5 and Bandit VXL buggies.

This is the Short RPM Sensor for Traxxas models. FeaturesThe RPM sensor plugs directly into your TQi receiver to provide real-time speed and RPM data while you drive. Real-time telemetry requires a...

This is a set of Gemini Chrome Wheels and Talon Tires for the Traxxas Revo, T-Maxx and E-Maxx. The wheels have a 17mm splined hex.FeaturesFive spoke chrome plated wheel construction Talon tires are...

This is the GTR Shock Rebuild Kit by Traxxas. FEATURES:Shock rebuild parts INCLUDES:Four blue plastic shock pistonsTwo blue rubber diaphragmsFour black plastic shock endsTwo piston lock nutsFour...

This is the Traxxas Front 37T Differential Ring and 13T Pinion Gear 37-tooth ring and 13-tooth pinion gears for front differentials. Replacement Part ForFord Fiesta ST RallyFord F-150 Raptor R...

These are the Traxxas Blue Aluminum Wheelie Bar Wheels and Rubber Tires for the Traxxas Wheelie Bars (model 4975 and 3678) for all Traxxas T-Maxx, E-Maxx, Jato, Slash 2WD, Slash 4x4, Rustler,...

This is the Traxxas TRX-4 Ford Bronco Spare Tire Mount, Bracket, Tire Cover and Hardware.Accessory Part ForTRX-4 Ford Bronco

This is a pair of Traxxas Throttle Dust Boots and a Return Spring for use on the carburetors of the TRX 2.5, 2.5R, and 3.3 nitro engines.Fits:Jato 2.5 & 3.3Nitro 4-TecNitro Rustler 2.5Nitro SlashRevo...

This is a pair of stock replacement long half shafts for the Traxxas T-Maxx and E-Maxx.FeaturesDurable nylon constructionSteel u-jointsIncludesTwo long external splined half shaftsTwo long internal...

These are the Traxxas Tubes Lightweight Aluminum Front Toe Link Turnbuckles for the Traxxas T-Maxx 3.3, E-Maxx 16.8V, and E-Maxx Brushless trucks. Traxxas TUBES are 30% lighter thant he stock steel...

This is a pair of Traxxas Unlimited Desert Racer 139mm GTR 1.146 Rate Green Stripe Progressive Shock Springs.Stock Replacement OnUnlimited Desert Racer (UDR)

This is a set of Traxxas LiPo Battery Charge Indicator Plug Set. The set includes four Green, four Blue, and four Grey indicator plugs. Use these plugs to know which batteries are fully charged,...

This is the Traxxas Spring, shock (GTR) (3.2 rate, purple) (1/16 Summit) (1 pair). This is Traxxas part number 7246Part Number: 7246 / TRA7246Fits1/16 Grave Digger1/16 SummitMore detail coming soon!...

This is the Traxxas Green Front Bumper, Mount, and Hardware for the Stampede 2WD, Craniac, Skully, and 1/10 Monster Jam Trucks.Fits1/10 Monster Jam TrucksCraniacSkullyStampede 2WD

This is a set of four Traxxas Green-Anodized Aluminum 4mm Lock Nuts with a Flanged and Serrated surface.Features May be used in any application requiring this size locknut Serrated rear section...

This is the Traxxas 2-piece Receiver and Battery Hold Down Kit for the Stampede VXL OverviewIncludes battery hold-down (grey) (1), receiver hold-down (grey) (1), metal posts (2), spacers (2),...

This is the Traxxas TRX-4 2021 Ford Bronco Cyber Orange Body Complete. Pro Scale 2021 Ford Bronco bodies come fully-painted with pre-assembled body accessories for easy mounting on your...

This is the Traxxas TRX-4 2021 Ford Bronco Rapid Red Body Complete. Pro Scale 2021 Ford Bronco bodies come fully-painted with pre-assembled body accessories for easy mounting on your TRX-4...

This is the Traxxas TRX-4 2021 Ford Bronco Clear Body.  Traxxas clear bodies come fully-trimmed with pre-drilled body holes for easy mounting. There's also a protective overspray film applied to...

This is the Traxxas 5000mAh 14.8v 4-Cell 25C LiPo Battery (155mm). These can be used in the Maxx 4S, Unlimited Desert Racer (UDR) and X-Maxx 8S trucks.FitsMaxx 4SUnlimited Desert Racer (UDR)X-Maxx...

This is the Traxxas Unlimited Desert Racer Battery Door, Strap, Retainers and Latch.Stock Replacement OnUnlimited Desert Racer (UDR)

This is the Traxxas 15-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear. The...

This is a Traxxas Revo Big Block Installation Kit.  This fits the Revo 2.5 and 3.3.  This kit allows Revo owners the option of installing various .21-.28 size engines...

This is a Traxxas Revo 40-Tooth Spur Gear.  This will fit the Revo 2.5 and 3.3 trucks.  The lower the number of teeth on the spur gear, the higher top end speed you will have...

This is the Traxxas 28-T Pinion Gear (Hardened Steel) 1.0 Metric Pitch The 28-tooth pinion gear (1.0 metric pitch) is machined from hardened steel for extra durability and fits 5 mm motor shafts...

This is the Traxxas Maxx Slash Complete LED Light Kit High-Intensity Maxx Slash LED Light Kit Built Maxx Tough!Maxx Slash redefines speed, durability and toughness with its innovative design and...

This is the Traxxas Rustler VXL ProGraphix Painted Body From mild to wild, choose your own colors to personalize your body. The detailed graphics are fully painted, but the rest of the body is clear,...