Traxxas

These are the Traxxas Unlimited Desert Racer BFGoodrich Baja KR3 Tires on Black/Red Method Race Wheels (2). The tires are pre-mounted on the wheels with foam inserts installed.Accessory Part...

This is the Traxxas Pink Front Bumper and Mount for Stampede 2WD, Skully, Craniac, and 1/10 Monster Jam trucks.Fits1/10 Monster Jam TrucksCraniacSkullyStampede 2WD

This is a pair of Traxxas TRX-4 Crawler 12mm Hex Wheel Hubs with Stub Axle Pins. This includes two hex hubs, two pins, and two screw pins.Stock Replacement OnTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4...

These are the Traxxas TRX-4 Crawler Portal Drive Caster Blocks and Kingpin Bushings. This includes two castor blocks and four kingpin bushings.FitsTRX-4

These are the Traxxas X-Maxx Battery Hold-Down Mounts with ScrewsFeatures:Molded composite plastic constructionFastens to chassis top brace and holds battery hold downs in placeIncludes:Four Battery...

This is the Traxxas Tires & wheels, assembled, glued (12-spoke red chrome wheels, slick tires) (2). Give your LaTrax Rally a new set of treads with these pre-glued wheels and tires. Slick racing...

This is the Traxxas Tires & wheels, assembled, glued (12-spoke blue chrome wheels, slick tires) (2). Give your LaTrax Rally a new set of treads with these pre-glued wheels and tires. Slick racing...

This is the Traxxas Tires & wheels, assembled, glued (12-spoke black chrome wheels, slick tires) (2). Give your LaTrax Rally a new set of treads with these pre-glued wheels and tires. Slick...

This is the Traxxas Tires & wheels, assembled, glued (12-spoke chrome wheels, slick tires) (2). Give your LaTrax Rally a new set of treads with these pre-glued wheels and tires. Slick racing...

This is the Traxxas Tires, slick (2). Set of two slick tires. Fits: Front or Rear. Replacement Part For1/18 LaTrax Rally1/18 LaTrax Rally VR46

This is the Traxxas Motor Plate This brightly-anodized aluminum motor plate keeps your motor tight during intense high-flying action with a touch of style. Replacement Part ForFord Fiesta ST...

This is the Traxxas Push rods, aluminum (red-anodized) (4) (assembled with rod ends). This is Traxxas part number 7118XPart Number: 7118X / TRA7118XFits1/16 E-Revo Brushed1/16 E-Revo VXL...

This is the Traxxas Lower chassis, low CG (blue). This is Traxxas part number 5831APart Number: 5831A / TRA5831AFitsSlash 2WDSlash 2WD Ford RaptorSlash 2WD VXLSlash 2WD VXL (low CG)Slash 2WD...

This is a pair of Traxxas Talon Tires with Foam Inserts, Pre-Mounted on 3.8" Chrome Wheels with 17mm Splined Hex Hubs. These can be used on 1/10 E-Revos, Revo 3.3, E-Maxx, T-Maxx, and Summit trucks...

This is a pair of Traxxas 15x24x5mm Blue Rubber-Sealed Ball Bearings.Features Steel construction with blue rubber seals Used in the front and rear differentials of the X-Maxx Includes: Two 15 x 24...

This is a set of Traxxas 3x30mm Cap-Head Shoulder Screws and Draglink Shoulder Screws for the Bandit, Nitro Slash, Rustler XL-5, and Slash 2WD XL-5 trucks.Includes:(2) 3x30mm Bellcrank Screws(2)...

These are the Traxxas 3x20mm Roundhead Machine Screws. Each package includes six screws.Fits1/10 Monster Jam TrucksBandit XL-5CraniacNitro SlashSkullyStampede XL-5 2WD

This is a pair of Traxxas Tracer 2.2" Black Chrome Rear Wheels for the Traxxas Bandit XL-5 and VXL buggies. These wheels have a slot in the hub to slide over the axle pin.FEATURES:Black Chrome...

These are Traxxas 4x8x3mm Sealed Ball Bearings (2). These are used in 1/16 vehicles such as the E-Revo and Slash, as well as many other Traxxas vehicles. Features:Blue rubber sealedMay also be used...

This is the Temperature and Voltage Sensor for the XO-1 On-Road Car from TraxxasFeaturesFunctions with the Traxxas TQi Link system to display battery voltage and temperature.IncludesTemperature and...

These are the Traxxas Front and Rear Toe Links for use on the 1/16 Slash and E-Revo vehicles. Features: Nylon construction Red in color Includes:Two Front and two Rear Toe LinksEight Hollow...

These are the Traxxas Pushrods for use on the 1/16 Slash VXL 4WD. Features: Nylon construction Red in color Includes:Four PushrodsEight Hollow Balls Specifications:Length: 55mm (2.2")Diameter: 5.2mm...

These are Traxxas 2.5x8mm Cap Head Screws (6). Features: Steel construction Black in color Cap head design Includes: (6) 2.5x8mm cap head screws Specifications:Length: 5/16" (8mm)Diameter: 3/32" (2...

This is the Carrier Differential for the Traxxas Revo and E-Maxx. FEATURES Replaces worn diff carriers gaskets and spacers INCLUDESDiff Carrier and GasketsSteel Spider Gear Braces (not used with...

This is a pair of Traxxas 2.8" Black Chrome All Star Wheels mounted with Talon Tires. Talon tires provide "just-right" grip and handling on a wide variety of surfaces. The tires come mounted with...

This is a Package of Replacement Cush-Drive Elements for the EZ Start 2 System. FEATURES:Black plastic construction INCLUDES:Four cush-drive elements REQUIRES:The remainder of the EZ Start 2 system...

This is the optional .8 Metric Pitch 65 Tooth Spur Gear for the Traxxas E-Maxx. FEATURES:Nylon construction, black in color.8 metric pitch INCLUDES:One 65T 0.8 metric pitch spur...

This is the Wing Mount for the Traxxas Revo 3.3 FEATURES:Nylon ConstructionBlack in Color INCLUDES:Two Wing SupportsOne Wing MountFour 4mm x 8mm Cap Head Socket ScrewsFour 3mm x 12mm Cap Head Socket...

This is a Traxxas Jato 2.5 and 3.3 Complete Fuel Tank Assembly.  This direct replacement tank features clear nylon construction with spring loaded lid, pre-installed pressure fittings, and the...

This is a Traxxas Jato 2.5 and 3.3 E-Z Start Wiring Harness.  This is a direct replacement part.

This is the Traxxas Front, Mid-Front, and Rear Skid Plate set for the Revo 3.3, 1/10 E-Revo, and Slayer trucks.IncludesFront, mid-front, and rear skid plates(8) 3X10mm button head screws(1) 3X30mm...

This is the Traxxas Front Bulkhead for the Revo and Slayer. Features: Black plastic construction Rocker shafts preinstalled Includes:Front bulkhead halves(2) rocker shafts(4) 4X14mm button...

This is a pair of Traxxas Steel Pushrods with installed rod ends for use with Progressive 1 Rockers or long travel rockers. If you need the rockers too, search our store for TRA5357. If you would...

This is a Traxxas TRX 2.5 and 2.5R Piston and Sleeve kit.  If you have several gallons of fuel through your engine, it may be time for a new piston and sleeve.  It is a...

This is the Stock Replacement Diff Gear Set for the Traxxas T/E Maxx.  These gears can also be referredto as bevel gears. FEATURES:Durable steel construction INCLUDES:Two 13 Tooth Output Gear...

This is the Front Skidplate for the Traxxas T-Maxx Monster Truck. This skidplate bolts to the Chassis (key #4922) and the Bulkheads key #4930 and provides protection to the front differential...

This is the Traxxas Slash Modified Driver Body Cage Body Cage, Driver/ Retainers (3) Fits: #10411 Body Accessory Part ForSlash Late Model BL-2sSlash Modified BL-2s

This is the Traxxas Front and Rear Clipless Body Latches Replacement front and rear clipless body latches for 10411-series Slash Modified bodies. Accessory Part ForSlash Late Model BL-2sSlash...

This is the Traxxas WideMaxx Extreme HD Driveshaft Assembly: Mini Maxx Replacement extreme HD driveshaft assembly fits left or right side, front or rear. Includes screw pin. Fits: WideMaxx-equipped...

This is the Traxxas WideMaxx 71 mm Fixed-Length Front Toe Links (2) Extended toe links (71 mm center to center) fit mini vehicles equipped with WideMaxx suspension components. Sold as a pair...