Traxxas

This is the Traxxas TRX-4 Crawler Complete Front and Rear Body Mount and Post Set.FitsTRX-4

This is a pair of Traxxas TRX-4 GTS Front 0.45 Rate Shock Springs. These have a natural finish.FitsTRX-4

This is the Traxxas TRX-4 ExoCage complete with Assembly Hardware. This fits #8011 series bodies. Requires: #8015 roof basket is sold separately. Replacement Part ForTRX-4 Scale and Trail...

This is the Traxxas X-Maxx Aluminum Center Driveshaft Assembly and steel double-sided gear.Features Aluminum construction with natural silver colored finish Double sided steel gear meshes with...

This is the Traxxas Suspension arms - Front or Rear (2).Left or right suspension arms fit front or rearReplacement Part For1/18 LaTrax Desert Prerunner1/18 LaTrax Teton

This is the Traxxas Linkage, steering. Steering linkage comes assembled with rod ends and hollow balls Replacement part forFord Fiesta ST RallyHoss 4X4 VXLRustler 4X4 VXLRustler 4X4Slash 4X4 Ultimate

This is the Traxxas Chassis, low CG (black). This is Traxxas part number 5832Part Number: 5832 / TRA5832FitsSlash 2WDSlash 2WD Ford RaptorSlash 2WD VXLSlash 2WD VXL (low CG)Slash 2WD XL-5More detail...

This is the Traxxas 43-Tooth 1st Speed Gear for Revo 3.3, Slayer, and T-Maxx 3.3 trucks.Includes: One 43T 1st Speed GearFitsRevo 3.3SlayerSlayer ProT-Maxx 2.5RT-Maxx 3.3

This is the Traxxas Revo and Slayer Receiver and Battery Box with cover, foam pad, adhesive, rubber charge jack plug, 4x8mm screw, and two 4x12mm screws. This set contains both boxes to accommodate...

This is a set of Traxxas TRX 3.3 Cooling Head Gaskets measuring 0.20, 0.30, and 0.40mm. The stock size is 0.30mm. These will give you the ability to tune your engine for optimal performance under...

This is a pair of Traxxas 7075-T6 Black Aluminum Front 112mm Toe Link Tubes with Rod Ends and Wrench for the T-Maxx 2.5R, 3.3, E-Maxx 16.8V, and E-Maxx Brushless trucks with the sealed pivot ball...

This is the Traxxas T-Maxx 2.5 and 3.3 Fuel Tank Rebuild Kit with cap, foam washer, o-ring, upper/lower retainers, screw, spring and screw pin.IncludesOne black nylon capOne steel cap springOne...

This is a pair of Traxxas Rustler Ribbed Front Tires Pre-Mounted on 2.8" Black Chrome All-Star Wheels. These have a 12mm hex and are designed for the front of the Rustler XL-5 and Rustler VXL trucks...

This is a pair of Traxxas Green 6061-T6 Aluminum Stub Axle Carriers with Bearings for the Slash 2WD, Rustler, Stampede 2WD, and Bandit vehicles.Features6061-T6 aluminum constructionAnodized green in...

These are the Traxxas 3x25mm Buttonhead Hex Machine Screws. Each package includes six screws.Replacement part for these modelsE-Revo VXL BrushlessMaxxRevoSlayer Pro 4X4SledgeSummitTRX-4 1972...

These are the Traxxas Alias Ribbed 2.2" Soft-Compound Front Tires with foam inserts for the Traxxas Bandit XL-5 and VXL buggies.FEATURES:Alias ribbed tiresFor use on front of buggySoft...

This is a pair of Traxxas Bandit Rear Alias 2.2" Tires Mounted on Tracer Black Chrome Wheels. These are a medium-compound tire with foam inserts, pre-mounted and glued on black chrome wheels.These...

This is the stock replacement Rear Bulkhead for the Traxxas Slash 4x4. FEATURES Hardened plastic construction Black in color INCLUDESOne rear bulkhead REQUIRES: Installation on Slash REPLACEMENT...

This is the Traxxas Replacement Idler Gear and Shaft for the Nitro Stampede/Rustler. This gear is located in the transmission. Features: White nylon construction Steel shaft Includes:One 20 tooth...

This is the Traxxas Rear Suspension Arm Set for use on the 1/16 Slash VXL 4WD. Features: Nylon construction Black in color Includes:One Lower Right Suspension ArmOne Lower Left Suspemsion...

This is the Traxxas Front Bumper and Mount for the Slash 1/10 2WD Short Course Racing Truck. Features: Nylon construction Black in color Includes: One Front Bumper and bumper mount Requires:...

This is the Header Spring and Gaskets from Traxxas for the TRX 2.5, TRX 2.5R and the TRX 3.3 Engines FEATURES Spring constructed of steel INCLUDESOne header springOne black rubber gasketOne...

This is the Traxxas Hardened Steel Front Center Drive Hub and Screw Pin for 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, Rally, and XO-1 vehicles. The replacement hardened-steel drive hub connects your...

These are the Traxxas Slash 4X4 Progressive Shock Springs: Rear, -10% Rate, Green (2) Pair of XX-long progressive-rate springs are custom-wound to provide responsive control over small bumps, with a...

These are the Traxxas Slash 4X4 Progressive Shock Springs: Front, -10% Rate, Green (2). Features Custom wound for Slash 4X4 Progressive-rate design allows small-bump compliance without...

These are the Steering Blocks for the Traxxas Slash 4x4. Replacement part forFord Fiesta ST RallyHoss 4X4 VXLRustler 4X4 VXLRustler 4X4Slash 4X4 VXLSlash 4X4Stampede 4X4 VXLStampede 4X4 Accessory...

This is the Front Bumper and Mount for the Traxxas Summit FEATURES Black plastic with mounting hardware INCLUDESFront bumperFront bumper mount REQUIRESInstallation on truck SPECSLength: Bumper: 7"...

This is the High Volume Air Filter Body for the Traxxas Revo 3.3. FEATURES Replaces damaged or dirty air filter assemblies Plastic body with foam element and rubber attachment hose INCLUDESFoam...

This is the Traxxas Countersunk Hex Screw 3x8mm

This is the Rubber Tuned Pipe Coupler Set for the Traxxas Revo, TRAC71**. FEATURES:Black rubber construction INCLUDES:One black couplerOne black exhaust deflectorTwo 7" (178mm) zip tiesTwo 3" (76mm)...

This is a Traxxas Jato 2.5 and 3.3 Aluminum Slipper Pressure Plate and Hub.

This is the Traxxas Assembled Differential with 37-T Ring and 13-T Pinions The replacement differential comes completely assembled and ready to install with a 37-tooth ring gear and 13-tooth front...

This is the Traxxas 47-Tooth Center Differential Steel Spur Gear (32-Pitch) The 47-tooth center differential spur gear (32-pitch) is made from steel for maximum power handling and durability. The...

This is the Traxxas Orange Aluminum Stub Axle Carriers (Left & Right) Carriers, stub axle, rear, 6061-T6 aluminum, left & right (orange-anodized) (for use with #9080 upgrade kit) Accessory...

This is the Traxxas Red Aluminum Stub Axle Carriers (Left & Right) Carriers, stub axle, rear, 6061-T6 aluminum, left & right (red-anodized) (for use with #9080 upgrade kit) Accessory Part For...

This is the Traxxas Green Aluminum Stub Axle Carriers (Left & Right) Carriers, stub axle, rear, 6061-T6 aluminum, left & right (green-anodized) (for use with #9080 upgrade kit) Accessory Part...

This is the Traxxas Blue Aluminum Stub Axle Carriers (Left & Right) Carriers, stub axle, rear, 6061-T6 aluminum, left & right (blue-anodized) (for use with #9080 upgrade kit) Accessory Part...

This is the Traxxas Gray Aluminum Stub Axle Carriers (Left & Right) Carriers, stub axle, rear, 6061-T6 aluminum, left & right (gray-anodized) (for use with #9080 upgrade kit) Accessory Part...

This is the Traxxas Orange Aluminum Steering Blocks (Left & Right) Steering blocks, 6061-T6 aluminum (orange-anodized), left & right (for use with #9080 upgrade kit) Accessory Part For...

This is the Traxxas Blue Aluminum Steering Blocks (Left & Right) Steering blocks, 6061-T6 aluminum (blue-anodized), left & right (for use with #9080 upgrade kit) Accessory Part For BIGFOOT...