This is the Traxxas Sledge with dual LiPo batteries & EZ-Peak Dual ID charger included! Out of the box, this setup will be ready for up to 70+MPH speeds* and the ultimate bashing versatility.
The Traxxas Sledge 1/8 scale 4WD brushless monster truck. Fully assembled, Ready-To-Race, with TQi 2.4GHz radio system, VXL-6s brushless power system, Belted Sledgehammer Tires and ProGraphix clipless body.
The new 6S Sledge has been beefed up with Belted Sledgehammer Tires and Color-Matched Blue, Red, Green, and Orange Aluminum Parts.
Belted Sledgehammer Tires
Explore Sledge’s top speed with confidence and control. New belted Sledgehammer tires provide more precise feel, with instant response to control inputs. Traxxas' belting process results in less tire distortion, allowing Sledge to feel even faster with a larger, more consistent contact patch on the ground.
Game-Changing Stability
Experience the full power of Sledge in a whole new way. Traxxas belted tires resist ballooning to provide ultimate stability and control at high speeds.
Geared For Belted Tires
With new belted tires, hardened steel 15/52 gearing is now standard to maintain the incredible speed and relentless acceleration Sledge is known for.
Color-Matched Aluminum
All-new graphics are available in four colors with color-matched aluminum chassis, shocks, wheel hubs, shock towers, tie bars, T-bar, and more.
Features
- VXL-6s Waterproof Electronic Speed Control
- 6s LiPo compatible
- Integrated cooling fan
- Real-time telemetry via Traxxas Link
- 3-LED status indicators
- Powered accessory ports
- 10-gauge silicone wire
- Integrated protection circuits
- Velineon 2000 kV Brushless Motor
- 4-pole 2000 kV
- 5 mm output shaft
- Finned can for better heat dissipation
- Aluminum motor cradle mount
- Supports entire motor length
- Reduces flex for longer gear life
- Up to 70+ mph with Two 3s LiPo Batteries (sold separately)
- Traxxas Stability Management
- Helps prevents spinouts and loss of control
- Never dulls throttle or slows the truck
- Adjusts from off to 100% assistance from the transmitter
- TQi 2.4 GHz High Output Radio System
- TQi 2-channel transmitter
- Traxxas Link enabled
- 2.4 GHz 5-channel micro receiver (6533) with fail-safe security and integrated telemetry ports
- Automatically stores and loads settings for up to 30 Traxxas Link-enabled models—just switch on and drive, “model selection” is not required
- Programmable Multi-Function knob
- Adjustable steering and throttle percentage (dual rates)
- Adjustable steering and throttle sensitivity (exponential)
- Drivetrain
- Full-time 4-wheel drive
- Heavy-duty steel driveshafts
- Large 8 mm steel stub axles
- Steel dogbone center driveline
- Protective rubber boots on differential inputs
- Transmission
- Mod-1 pinion and spur gears
- Fixed gear mesh system
- Torque-Biasing Center Drive
- Differentials
- Heavy-duty sealed 4-gear design
- Large scale steel ring and pinion gears
- Large 8 mm output shafts
- Steel drive cups
- Easy access bulkheads
- GT-Maxx Shocks
- Longer rear shocks for more travel
- Machined aluminum threaded body
- Extra-large bore and capacity
- Large-diameter damper shaft
- Lower seal cartridge with dual X-rings
- Height-adjustable spring retainer
- Lower spring perches bolted on
- Suspension
- Thick 5 mm 6061-T6 aluminum shock towers
- Ultra-tough composite arms
- Made from our strongest cold-weather material
- Molded insert for clean look
- Rear rock deflectors
- Press-in hinge pins to reduce play
- Oversize molded toe and camber links
- Heavy-duty C-hubs with oversize bearings
- Multiple mounting points for suspension tuning
- Chassis
- 3.2 mm ribbed aluminum chassis
- Formed edges for improved strength
- Thick aluminum T-Bar for added rigidity
- High-strength buttressing on shock towers
- Rugged locking battery compartment with quick-release door
- Low-CG design for improved handling
- Interlocking components for tight tolerances
- Tough front and rear bumpers double as skid plates
- Hidden wire management for clean appearance
- Clipless ProGraphix Body
- One-handed clipless body mounting system
- Rigid internal frame
- Molded body reinforcements for tear-through protection
- Protective roof skids
- Rugged high-downforce rear wing
- Steering
- Waterproof 2275 metal gear servo
- High-throw bellcrank steering design
- Heavy-duty servo saver with aluminum posts
- Metal servo horn
- Wheels and Tires
- Huge 6.7″ Sledgehammer all-terrain tires
- Belted carcass resists ballooning
- Tough 3.8″ black wheels
- Splined 17 mm aluminum axle hubs
*Click to See the Full Line of Parts/Accessories
SPECIFICATIONS
Length: 23.78 inches (604 mm including wing)
Width: 18.10 inches (459 mm)
Front Track: 18.10 inches (459 mm)
Rear Track: 18.10 inches (459 mm)
Height: 8.43 inches (214 mm)
Wheelbase: 15.10 inches (384 mm)
Center Ground Clearance: 1.95 inches (50 mm)
Drivetrain: Shaft-driven 4WD
Transmission: Single speed
Differential Type: Sealed, hardened steel bevel, limited slip
Gear Pitch: 1.0 metric pitch
Servo(s): 2275 digital metal-gear waterproof (347 oz-in)
Radio System: TQi 2.4 GHz 2-channel transmitter with TSM receiver
Battery Compartment Specs: 181 mm X 54 mm X 45 mm
Model Speed: 70+ mph with 6s LiPo battery and optional gearing*
**Optional Gearing Need for Top Speeds:
65+ - 16-T Pinion / 52 Tooth Spur (TRA6489X & TRA9652)
70+ - 18-T Pinion / 46 Tooth Spur (TRA6491R & TRA9651)
Model Skill Level: 4
Scale: 1/8
Weight: 12.74 lbs (5.77 kg)
REQUIRES
(4) AA alkaline batteries for the transmitter.
