Scalextric 1/32 Slot Car Easy Fit Plug to Convert F1 Cars To Digital

This is the Scalextric 1/32 Slot Car Easy Fit Plug to Convert Analog F1 Cars To Digital. This is suitable for fitting to open-wheeled single-seat F1 style DPR Scalextric cars. To convert standard-chassis DPR Scalextric cars to Digital, use the C8515 EasyFit Digital Plug.

The conversion only requires a small screw-driver and takes less than sixty seconds to perform.

Scalextric Digital
Scalextric Digital represents a ground breaking step forward in the way Scalextric is played. Now, with the DIGITAL system, up to six cars can race on one lane*. At the press of a button, drivers can switch lanes for overtaking and blocking!

F1 EasyFit Digital Plug
Most cars produced from 2007 onwards will have, as standard, a socket on the car where the EasyFit Digital Plug is connected to convert the car for use on a SCALEXTRIC DIGITAL layout. C8516 F1 EasyFit Digital Plug is suitable for fitting to open-wheeled single-seat F1 style DPR Scalextric cars.

To Convert a DPR car
1. Unscrew the panel on the base of the car and disconnect the braid-to-motor wiring plug.
2. Connect the F1 EasyFit Digital Plug to the braid-to-motor wiring plug.
3. Replace the retaining screw to secure the F1 EasyFit Digital Plug to the chassis.

Features
The F1 EasyFit Digital Plug offer a 'plug and play' solution - DPR Scalextric cars to be digitized in under sixty seconds.

Each C8516 F1 EasyFit Digital Plug can be transferred easily from one car to another.

There is no need for a soldering iron or modelling expertise.

Note
C8516 F1 EasyFit Digital Plug is suitable for fitting to open-wheeled single-seat F1 style DPR Scalextric cars.

To convert standard DPR Scalextric cars to Digital, use C8515 EasyFit Digital Plug.

Many non-DPR Scalextric cars can be converted to Digital using Digital Chips C7005 and C7006.

* Four car and six car powerbases available