Futaba S3003 Servo w/Hardware

  • Futaba S3003 Servo w/Hardware
This item earns 11 Reward Points!
Model: FUT01102164-1
This is the Futaba S3003 Standard Servo with hardware. This basic servo is used in cars, boats, or where standard servos are used. This is also a replacement for the following servos: S138,S148,S22,S38 and S12.

This servo can produce high-current draw from your batteries. If using NiMH or LiPo batteries, make sure they are capable of delivering sufficient amps.

One S3003 standard servo with preinstalled servo horn
Four brass eyelets
Four Black rectangular rubber grommets
Four servo mount screws
One servo wheel 1-3/8" (35mm) in diameter
One X-shape servo arm 1.5" (38mm) across
One star shaped arm 1-1/4" (32mm) across
Nylon gears

Speed: .23 sec/60° @ 4.8V or .16 sec/60° @ 6V
Torque: 44 oz-in @ 4.8V or 56.8 oz-in @ 6V
(3.2 kg-cm @ 4.8V or 4.1 kg-cm @ 6V)
Size: 1.6"L x .8"W x 1.4"H (41x20x36mm) w/o output shaft
Weight: 1.3oz (37.2g)
Connector: "J" type with approx. 5" lead

You May Also Like