This is a pair of Traxxas Bandit Rear Alias 2.2" Tires Mounted on Tracer Black Chrome Wheels. These are a medium-compound tire with foam inserts, pre-mounted and glued on black chrome wheels.These are a direct fit on the rear of the Bandit XL-5 and...

This is the Racers Edge Glitch Buster Power Capacitor. These can be plugged into any open channel on your receiver to help reduce glitching caused by radio interference on your RC car, truck, or buggy. Compatible with Spektrum, Futaba, Hitec, Traxxas,...

This is the RPM Blue Front Bumper and Skid Plate Set for the Traxxas Slash 2WD and Nitro Slash short course trucks. This setup is almost a full ounce lighter than stock!Our two-piece front bumper for the Traxxas Slash 2WD & Nitro Slash is simple,...

These are the RPM Chrome Mock Through-the-Body Side Exhaust Tips for 1/10 Scale Vehicles. This set comes with two complete tips, one for each side of the vehicle.Details. They're what set a custom ride apart from the common, everyday vehicle. Details are...

This is Tamiya PS-31 Smoke Window Tint Color RC Body Spray Lacquer Paint for Polycarbonate RC Car, Truck, and Buggy Bodies. The smoke color is perfect for giving your RC body tinted windows to make your vehicle stand out from the crowd...

This is Tamiya PS-23 Gunmetal Color RC Body Spray Lacquer Paint for Polycarbonate RC Car, Truck, and Buggy Bodies.Features: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. This paint is impervious to oil...

This is Tamiya PS-16 Metal Blue Color RC Body Spray Lacquer Paint for Polycarbonate RC Car, Truck, and Buggy Bodies.Features: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. This paint is impervious to oil...

This is Tamiya PS-15 Metal Red Color RC Body Spray Lacquer Paint for Polycarbonate RC Car, Truck, and Buggy Bodies.Features: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. This paint is impervious to oil...

This is Tamiya PS-12 Silver Color RC Body Spray Lacquer Paint for Polycarbonate RC Car, Truck, and Buggy Bodies.Features: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. This paint is impervious to oil and...

This is Tamiya PS-10 Purple Color RC Body Spray Lacquer Paint for Polycarbonate RC Car, Truck, and Buggy Bodies.Features: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. This paint is impervious to oil and...

This is Tamiya PS-8 Light Green Color RC Body Spray Lacquer Paint for Polycarbonate RC Car, Truck, and Buggy Bodies.Features: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. This paint is impervious to oil...

This is Tamiya PS-7 Orange Color RC Body Spray Lacquer Paint for Polycarbonate RC Car, Truck, and Buggy Bodies.Features: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. This paint is impervious to oil and...

This is Tamiya PS-6 Yellow Color RC Body Spray Lacquer Paint for Polycarbonate RC Car, Truck, and Buggy Bodies.Features: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. This paint is impervious to oil and...

This is Tamiya PS-5 Black Color RC Body Spray Lacquer Paint for Polycarbonate RC Car, Truck, and Buggy Bodies.Features: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. This paint is impervious to oil and...

This is Tamiya PS-4 Blue Color RC Body Spray Lacquer Paint for Polycarbonate RC Car, Truck, and Buggy Bodies.Features: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. This paint is impervious to oil and...

This is Tamiya PS-2 Red Color RC Body Spray Lacquer Paint for Polycarbonate RC Car, Truck, and Buggy Bodies.Features: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. This paint is impervious to oil and...

This is Tamiya PS-1 White Color RC Body Spray Lacquer Paint for Polycarbonate RC Car, Truck, and Buggy Bodies.Features: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. This paint is impervious to oil and...

This is the stock replacement Rear Bulkhead for the Traxxas Slash 4x4. FEATURES Hardened plastic construction Black in color INCLUDESOne rear bulkhead REQUIRES: Installation on Slash REPLACEMENT PART FORFord F-150 Raptor R 4X4Hoss 4X4 VXLSlash 4X4...

This is the Traxxas Replacement Idler Gear and Shaft for the Nitro Stampede/Rustler. This gear is located in the transmission. Features: White nylon construction Steel shaft Includes:One 20 tooth idler gearOne idler gear shaft Specifications:Gear outer...

This is the Traxxas Rear Suspension Arm Set for use on the 1/16 Slash Rear suspension arm set includes upper right & left and lower right & left suspension arms Features: Nylon constructionBlack in color Includes:One Lower Right Suspension ArmOne...

This is the Traxxas Front Bumper and Mount for the Slash 1/10 2WD Short Course Racing Truck. Features: Nylon construction Black in color Includes: One Front Bumper and bumper mount Requires: Installation on the Traxxas Slash

This is the Header Spring and Gaskets from Traxxas for the TRX 2.5, TRX 2.5R and the TRX 3.3 Engines FEATURES Spring constructed of steel INCLUDESOne header springOne black rubber gasketOne white nylon gasket REQUIRESFastening header to engine...

This is the Traxxas Hardened Steel Front Center Drive Hub and Screw Pin for 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, Rally, and XO-1 vehicles. The replacement hardened-steel drive hub connects your front differential to the aluminum center driveshaft...

These are the Traxxas Slash 4X4 Progressive Shock Springs: Rear, -10% Rate, Green (2) Pair of XX-long progressive-rate springs are custom-wound to provide responsive control over small bumps, with a progressively stiffer rate to absorb hard landings...

These are the Traxxas Slash 4X4 Progressive Shock Springs: Front, -10% Rate, Green (2). Features Custom wound for Slash 4X4 Progressive-rate design allows small-bump compliance without compromising big-hit capability Durable powdercoated...

These are the Steering Blocks for the Traxxas Slash 4x4. Replacement part forFord Fiesta ST RallyHoss 4X4 VXLRustler 4X4 VXLRustler 4X4Slash 4X4 VXLSlash 4X4Stampede 4X4 VXLStampede 4X4 Accessory part forSlash 4X4 Ultimate

This is the Front Bumper and Mount for the Traxxas Summit FEATURES Black plastic with mounting hardware INCLUDESFront bumperFront bumper mount REQUIRESInstallation on truck SPECSLength: Bumper: 7" (178mm)Mount: 3" (78mm)

This is the High Volume Air Filter Body for the Traxxas Revo 3.3. FEATURES Replaces damaged or dirty air filter assemblies Plastic body with foam element and rubber attachment hose INCLUDESFoam filter and pre filter, support cap, filter base  and...

This is the Traxxas Countersunk Hex Screw 3x8mm

These are the Pro-Line PowerStroke Front Shocks Spring Assortment Features Six Primary Springs (black/short) Six Secondary Springs (silver/long) Color coded stripes to identify rates Spring rate chart available showing spring all combinations and...

This is a Team Integy Aluminum Motor Heatsink with Cooling Fan (Silver) for the Traxxas Slash 2WD, Stampede 2WD, Rustler and Bandit vehicles. This will only fit XL-5 versions.Heat is the enemy, especially when it comes to electric motors. Keep your...

This is the Robinson Racing Forward Only Standard Ratio Gear Kit for the Traxxas and Revo 3.3 trucks currently equippedwith a forward/reverse transmission.FEATURES: Installs in gearbox to allow forward only operation INCLUDES:One 13T and 17T standard...

This is the Rubber Tuned Pipe Coupler Set for the Traxxas Revo, TRAC71**. FEATURES:Black rubber construction INCLUDES:One black couplerOne black exhaust deflectorTwo 7" (178mm) zip tiesTwo 3" (76mm) zip ties REQUIRES:Installing between tuned pipe and...

This is a Traxxas Jato 2.5 and 3.3 Aluminum Slipper Pressure Plate and Hub.

This is the Hitec HS-5625MG Digital High-Speed 2BB Metal-Geared Programmable Servo with the Universal Connector.  The universal connector allows this servo to work with JR, Hitec, Futaba, and Airtronics Z wiring and radio systems.  These...

This is the Viper Scale Racing MG+ Short-Wheelbase Lexan Body Clip (Fits Viper Pin out) MG+ Lexan Body Clip (Fits Viper Pin Out)Run a Lexan body on your AFX Mega G+ short-wheelbase slot car with this purpose-built body clip. The pin location is matched...

This is the Viper Scale Racing Mega G+ Big Wheel Rear End Set Up The Mega G+ Big wheel rear end set up for those that want to build out there AFX Mega G+ with the Viper billet wheels. Give that Mega G+ an upgrade and get some billet wheels on it! We...

This is the Traxxas Stampede 2WD Green Painted Body Is it time to replace your Stampede body or upgrade to an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix paint with pre-applied decals. There’s no need to trim the...

This is Traxxas Fox Orange Aluminum GTR Shock Caps (4) This set of four Fox aluminum shock caps is a great way to boost the durability and style of your GTR shocks. The machined caps fit precisely and hold tightly, run after run, jump after jump. The...

This is the GPM Rustler VXL Front Adjustable Spring Damper (Gray Silver) This alloy front spring damper assembly is a performance-oriented aftermarket upgrade for the TRAXXAS 1/10 Rustler VXL platform. The set includes an adjustable damper body with...