This is the GPM Racing Green Aluminum Front Bumper for Traxxas Rustler 2WD, Stampede 2WD, Bandit and several other vehicles listed below. Made of 6061-T6 aluminum, these are durable and look great.These are replacements for Traxxas part 2735.Accessory...

This is the GPM Racing Blue Aluminum Rear Suspension Arm Set for Traxxas 4-Tec 2.0 cars. These are machined from 6061-T6 aluminum for strength and durability, then anodized for a fantastic appearance.These are upgraded replacements for stock Traxxas...

This is the GPM Racing Green Aluminum Heatsink Spur Gear Cover for the Traxxas E-Revo 2.0. Machined from 6061-T6 aluminum for strength and fantastic looks, this heatsink helps pull heat from the motor plate area and is also much more durable than the...

These are the GPM Racing Orange Aluminum Steering Blocks for the Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, Bandit, and Nitro Slash trucks.This is a direct replacement for Traxxas part 3736 steering blocks.Accessory Part ForTraxxas 1/10...

These are the Traxxas E-Revo 2 Left Rear Heavy-Duty Adjustable Wheelbase Upper and Lower Suspension Arms.Stock Replacement OnE-Revo 2.0

These are the Traxxas E-Revo 2 Right Rear Heavy-Duty Adjustable Wheelbase Upper and Lower Suspension Arms.Stock Replacement OnE-Revo 2.0

These are the Traxxas Unlimited Desert Racer Steering Bellcranks, Servo Saver, Spring, Retainer and Servo Horn.Stock Replacement OnUnlimited Desert Racer (UDR)

This is the Traxxas TRX-4 Ford Bronco Tailgate Panel and Tail Light Lens (left & right).Stock Replacement OnTRX-4 Ford Bronco

This is the Traxxas Machined Spiral Cut Front Differential Ring and Pinion Gear. These are used as an upgrade over the 5379X gears found in many vehicles. Spiral-cut 37-tooth ring and 13-tooth pinion front differential gear sets are CNC-machined from a...

This is the Traxxas 4-Tec 2.0 Ford Mustang Clear Body with Window Masks and Decals. The body comes pre-cut. From mild to wild, Traxxas clear bodies are your own personal canvas. You choose the color and design and Traxxas ProGraphix paint makes it easy...

These are the Hot Racing Heavy Duty Aluminum Front or Rear Axle Carriers (AKA steering knuckles) for Traxxas 1/16 E-Revo, Slash 4x4, Summit, Grave Digger, Ford Fiesta, and Rally.NOTE: The disc brakes shown in photos are Hot Racing VXS21BR02 and VXS21BS02...

This is the Traxxas 4-Tec 2.0 Rear Bulkhead. This is used in both the Ford GT and Mustang GT versions.Fits4-Tec 2.0

This is the Traxxas 4-Tec 2.0 Foam Body Bumper. This can be used with both the Ford GT and Mustang GT bodies.Fits4-Tec 2.0

This is the Hot Racing Blue Aluminum Adjustable Trim Tabs for Traxxas Spartan boats. These are functional, durable, and look awesome!FEATURES:- Adjusts angle of trim tab assembly for proper hull planing- CNC machined aluminum construction- Pre-drilled...

This is the Hot Racing 20-Tooth 48-Pitch Nitride Steel Pinion Gear for 5mm and 1/8" Shafts. The pinion has a 5mm bore and also includes a 1/8" shaft conversion sleeve. This works on vehicles like the Traxxas Slash 2WD, Stampede 2WD, Rustler, as well as...

This is the Hot Racing Aluminum Dual 5mm Bearing Drive Strut for use with the stock prop shaft on the Traxxas DCB M41 Catamaran.FEATURES:- Pre-installed dual 5x10x4mm stainless steel ball bearings- 5mm ID bearings are compatible with the stock prop...

This is the Traxxas X-Maxx Replacement Rear Bumper.FeaturesMolded composite plastic constructionIncludes: Rear BumperSpecificationsLength: 7.9" (202mm)Height: 1.6" (41mm)

This is the Traxxas Lower chassis, low CG (black). This is Traxxas part number 5831Part Number: 5831 / TRA5831FitsSlash 2WDSlash 2WD Ford RaptorSlash 2WD VXLSlash 2WD VXL (low CG)Slash 2WD XL-5More detail coming soon! Please check your vehicle manual to...

This is the Traxxas High-Performance Vented Brake Disc for Revo, Slayer, and T-Maxx 3.3 trucks. The vented design dissipates heat better for stronger, more consistent braking throughout a run.FeaturesSteel construction, silver in colorTrue vented design...

This is a package of six Traxxas 4x12mm Button-Head Hex Machine Screws. Replacement part for these modelsDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0E-Revo VXL BrushlessFord F-150 RaptorFord Fiesta ST RallyHoss 4X4...

These are the Traxxas 3x10mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used across many of the Traxxas vehicles.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Rally1/10 Summit1/16 E-Revo Brushed1/16 E-Revo VXL...

This is a pair of Traxxas 2555 Rear Suspension Arms. These are used on many vehicles, such as the Slash 2WD, Nitro Rustler, Nitro Slash, Nitro Sport, and Nitro Stampede. Standard rear suspension arms Accessory Part ForFord F-150 RaptorNitro RustlerNitro...

This is the RPM Black Rear Shock Tower for Traxxas Slash 4x4, Stampede 4x4, 1/10 Rally, and Telluride vehicles. This replaces the stock Traxxas part #6838.RPM is proud to introduce our rear shock tower for the Traxxas Slash 4x4, Stampede 4x4, 1/10...

This is a pair of Traxxas GTR Shock Springs (XX-Long .874 Black) for 1/10 Slash Ultimate & Platinum trucks with GTR shocks. Shock springs for 1/10 scale XX-long GTR shocks use high-quality spring steel with a durable white powder-coated finish. GTR...

This is the Castle Creations Phoenix Edge HV 120 Speed Control for use with 550, 600, and 700 class helicopters, or giant scale airplanes. The HV 120 handles up to 120-amps of continuous current and can be used with up to 12S LiPo battery packs. With the...

This is the Castle Creations Phoenix Edge HV 160 Speed Control for use with 700 or 800 class helicopters, or giant scale airplanes. The HV 160 handles up to 160-amps of continuous current and can be used with up to 12S LiPo battery packs. With the debut...

This is the Castle Creations Phoenix Edge 50-Amp 34-Volt Electronic Speed Control with 5-amp BEC. The Phoenix Edge 50 is intended for use in 450-class helicopters and fixed wing aircraft from .25-.35 size. As always, the Edge series of controllers offer...

This is the Castle Creations Phoenix Edge 100-Amp 34-Volt Electronic Speed Control with 5-amp BEC. The Phoenix Edge 100 is intended for use in helicopters ranging from 500 to 600 size, and fixed wing aircraft from .40-.90 size. As always, the Edge series...

This is the Castle Creations Talon 90 electronic speed control. Castle’s Talon 90 ESC sports a BEC designed for today’s servos, pumping out up to 20 amps peak power and 9 amps of continuous power to keep even the hungriest servos happy.Features:Ideal...

These are the 3x6mm Flathead Machine Screws from Traxxas.FeaturesSteel constructionBlack in colorIncludesSix 3x6mm Flathead Machine ScrewsSpecificationsLength: 6mmDiameter: 3mm

This is the Pro-Line 1972 Chevy C10 body for the Traxxas Nitro and Electric Stampede 2WD and 4x4 trucks, as well as rock crawlers like the Axial AX10, SCX10, and Tamiya CR-01. The body is supplied unpainted.OverviewThere’s nothing like a classic truck!...

This is the Suspension Pin Set for the Traxxas Slash 4X4.  The hinge pins hold the suspension arms to the bulkheads. Complete front and rear suspension pin set FEATURES Durable steel construction Silver in color INCLUDESFour 51.5mm pins Four 30mm...

These are the Traxxas Constant Velocity Driveshafts for use on the 1/16 E-Revo, E-Revo VXL, and 1/16 Grave Digger trucks. Traxxas Steel Constant Velocity Driveshafts are designed to handle the extreme horsepower and articulation that Traxxas...

This is a package of six 3x12mm Traxxas Countersunk Hex Head Screws. Features:Steel constructionBlack in colorUsed on the Traxxas Revo monster truck, can also be used in any application where a 3x12mm countersunk screw is required Includes: Six 3x12mm...

This is the Pro-Line 1980 Chevy Pick-Up Body for the T-Maxx, E-Maxx, E-Revo, Revo 3.3, MGT Features Made with Genuine GE .060 lexan Classic body lines Stock/Custom decal included Includes decal sheet, window mask Overview Theres nothing like a...

This is a 26 Tooth, 48 Pitch Pinion Gear with Set Screw from Traxxas. FEATURES:Steel construction, silver in color INCLUDES:One 26 Tooth, 48 Pitch Pinion GearOne 3x4mm Set Screw (1.5mm hex size) REQUIRES:Installation SPECS:Length: .42" (10.5mm)Inside...

This is the 18-T Pinion (48-pitch) Gear with Set Screw 18-Tooth Pinion Gear (48-Pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance...

This is the Hitec HS-322HD Deluxe Standard Karbonite Gear Servo with the Universal Connector.  Because this has the universal connector, it will work with JR, Hitec, Futaba, and Airtronics Z radio systems.  This servo is a...

This is the Hitec HS-225MG Precision Mighty Mini Ball-Bearing Metal-Geared Servo.  This servo has the universal connector, and it will work with all current JR, Hitec, Futaba, and Airtronics Z radio systems and wiring. The HS-225MG series...

This is a package of Traxxas Large Rod Ends and Hollow Balls for the Revo 2.5 and 3.3 trucks.  There are 12 rod ends and hollow balls per package. FEATURES:Plastic constructionBlack in colorMetal Pivot Balls INCLUDES:12 Rod Ends12...