This is a set of 4 Traxxas 7075-T6 Hard-Anodized Aluminum Pivot Balls and Pivot Ball Cap Bushings. These fit the 1/10 E-Revo, 1/10 Summit, E-Maxx, T-Maxx, Revo 3.3, Slayer, and more!These trick, hard-anodized 7075-T6 aluminum pivot balls are...

This is the RPM Blue Front Bulkhead Set for the Traxxas T-Maxx .15, 2.5, 3.3, E-Maxx, and E-Maxx Brushless trucks. These are backed by RPM's industry-leading lifetime breakage warranty.Until now, the Traxxas T-Maxx and E-Maxx line of trucks has been...

This the LaTrax Alias Quadcopter Blue Rotor Blade Set. It includes two rotor blades and two screws. Features: Plastic construction Flexible to withstand crashes Includes: Two Rotor Blades Two 1.6x5mm Button Head Cap Screws

This is the Robinson Racing GEN3 Slipper Kit with 65-tooth Steel Spur Gear for the Traxxas E-Revo Brushless and E-Maxx Brushless trucks.Robinson Racing GEN3 Slipper Units are over-engineered to meet the punishing demands of the most powerful brushless...

This is the Traxxas Steering Arm and Shock Mount Set for use on the 1/16 vehicles including the E-Revo, Slash, Summit, Mustang, Fiesta, and Rally vehicles.FEATURESNylon construction Black in...

This is the RPM Blue Sealed Transmission Gear Cover for Slash 2WD, Stampede 2WD, electric Rustler, and Bandit vehicles. These are recommended for spur gears up to 87-teeth.The most recent electric versions of the Rustler, Stampede, Bandit and Slash 2wd...

This is a pair of Assembled and Glued Rear Victory Tires and Wheels for the Traxxas Jato 2.5 and 3.3 trucks.  These are direct replacments for the originals, and if you are running on tar or cement, you know how quickly tires can go. ...

This is the Traxxas 2055 High-Torque Servo.  This has 80 oz/in of torque, making it an excellent steering servo.  This works well in the Traxxas T-Maxx, E-Maxx, Revo or any other vehicle that you would like to mount this in...

This is a Traxxas Revo 2.5 and 3.3 Linkage Set.  This includes the throttle & brake linkage, linkage rods, springs, thumb nut, & various other hardware.

This is the Integy Black Aluminum Type II Front Bumper for the Traxxas Stampede 2WD, Rustler, and Bandit. FEATURES Aluminum construction Black in color INCLUDESOne Type II Aluminum Front Bumper REQUIRESInstallation on the vehicle COMMENTSAlso...

This is the GPM Orange 7075 Alloy Transmission Cush Drive Housing Made with a quality light weight high tensile strength aluminum 7075 for greater durability and higher stability while running the truck. The upgrade minimizes the gap between the gear and...

This is the GPM Green 7075 Alloy Transmission Cush Drive Housing Made with a quality light weight high tensile strength aluminum 7075 for greater durability and higher stability while running the truck. The upgrade minimizes the gap between the gear and...

This is the Savox SH-0263MG Micro Digital Servo w/ Soft Start, 0.10/30 @ 6v The Savox SH-0263MG metal-gear, digital, micro servo is quick and built tough. "Plus" series servos feature Soft Start and Sanwa SSR compatibility. Features Metal gear train...

This is the Gen3 RC 26-Piece Rubber Sealed Ball Bearing Kit for Traxxas TRX-4 Front & Rear Axles (completes both axles).  This fits all TRX-4 models including the TRX-4 Sport, Traxx, Ford Bronco, Land Rover Defender, Chevy Blazer, and...

This is the Gen3 RC 8-Piece Rubber-Sealed Bearing Kit for Traxxas 1/10 Slash 2WD, Rustler 2WD, Stampede 2WD and Bandit VXL Axles.Features Super durable black rubber seals offer excellent protection against the harshest elements Pre-lubricated with...

This is a pair of Pro-Line Badlands MX28 2.8 Tires on F-11 Black Wheels with 12mm Hex for Traxxas Electric 2WD Rear. These are a great upgrade for Traxxas electric Stampede 2WD and Rustler 2WD trucks.Tire Features Awesome Motocross-Inspired...

This is the Hot Racing Heavy Duty Splined Front Center Drive Shaft with Planetary Gear Housing for Traxxas Unlimited Desert Racer trucks. This is a great way to upgrade one of the weak points in the UDR driveline.This upgrade replaces Traxxas parts 8556...

These are the GPM Racing Green Aluminum Adjustable 102mm Piggyback Rear Shocks for Traxxas Slash 4x4, Rustler 4x4, and Stampede 4x4 trucks. Made of 6061-T6 aluminum, with a beefy 4mm steel shock shaft, these are a great upgrade for bashers and show...

This is the GPM Racing Gunmetal Aluminum Steering Servo Arm Horn for 25T Spline Servos on the Traxxas X-Maxx trucks. These fit the Traxxas 2085 and 2085X servos only.This is an upgrade for the stock Traxxas servo arm in part 7747.Accessory Part...

This is the GPM Racing Black Hardened Steel Front CVD Driveshaft Set for Traxxas 4-Tec 2.0 cars. Made from #45 hardened steel, these shafts are built to withstand a hot rod 4-Tec 2.0 setup.These can be used as an upgrade for Traxxas part 8350, 8354, or...

This is the GPM Racing Black Aluminum Cush Drive Housing for Traxxas E-Revo 2.0 and X-Maxx 8S trucks. Made of 6061-T6 aluminum, this is an excellent upgrade and looks great as well.Direct replacement upgrade for Traxxas part 7793X cush drive housing...

This is the GPM Racing Orange Aluminum Front Bulkhead for Traxxas electric Stampede 2WD, Slash 2WD, Rustler 2WD, Bandit, Nitro Slash, Nitro Rustler, and Nitro Stampede trucks.This is a direct fit upgrade for the stock Traxxas part 2530A bulkheads...

These are the GPM Racing Red Aluminum Steering Blocks for the Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, Bandit, and Nitro Slash trucks.This is a direct replacement for Traxxas part 3736 steering blocks.Accessory Part ForTraxxas 1/10...

This is the Traxxas Rustler 4x4 Front Bumper and Bumper Support.Stock Replacement OnRustler 4x4 BrushedRustler 4x4 VXL

These are the Traxxas Unlimited Desert Racer Suspension Pin Retainers (upper (2), lower (1)).Stock Replacement OnUnlimited Desert Racer (UDR)

This is the Traxxas 19-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear.Accessory Part For1/10 E-Revo BrushedE-MaxxSlash 4x4...

This is the Traxxas Green Aluminum Stub Axle.  Add a touch of style to your X-Maxx or XRT with these brightly-anodized aluminum stub axles.  For use with 8s-spec heavy duty driveshaft (#7750X) only. Replacement Part ForX-MaxxXRT

This is a pair of Traxxas Pink Front Progressive Rate Springs for the Slash 2WD trucks.FitsNitro SlashSlash 2WD Ford RaptorSlash 2WD VXLSlash 2WD XL-5

This is the Traxxas DCB M41 Boat Stand. These are a must-have for storage and maintenance of a boat like the M41 catamaran.FitsDCB M41 boats

This is the Hot Racing Aluminum Heat Sink Motor Mount for Traxxas 1/16 vehicles with 540 or 550 Motors, such as the 1/16 E-Revo, 1/16 Slash, 1/16 Rally, and 1/16 Summit.FEATURES:- CNC machined aluminum construction- Anodized black with red anodized...

This is the Traxxas CV-Driveshaft Rebuild Kit for 2 Driveshafts. This set includes pins for 2 driveshaft assemblies, and is only designed for use with 7750X driveshafts.FitsX-MaxxXRT

This is the Traxxas X-Maxx 54-tooth Steel Spur Gear. This gear is a must-have upgrade for hard bashing on the X-Maxx. 54-tooth spur gear (1.0 metric pitch) has steel teeth for superior power handling and durability. Traxxas spur gears let you fine-tune...

This is the Traxxas X-Maxx Steering Servo Horn and Steering Linkage.FeaturesMolded composite plastic constructionIncludesServo HornSteering Linkage with Pressed-In Steel Balls

This is the Traxxas Differential locker, (2). This is Traxxas part number 7381Part Number: 7381 / TRA7381Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Kyle Busch Truck1/16 Rally VXL1/16 Slash 4x41/16...

This is the Traxxas Spring, shock (nickel finish) (GTR) (2.925 rate, blue) (1 pair). This is Traxxas part number 7245APart Number: 7245A / TRA7245AFits1/16 Grave Digger1/16 SummitMore detail coming soon! Please check your vehicle manual to confirm...

Traxxas Splined 17mm Wheel Nuts (green-anodized) (4) This set of four 17 mm blue aluminum wheel nuts is beautiful anodized for eye-catching looks with Traxxas-tough durability. Replacement part ForJato 4X4 Brushless Accessory Part ForXO-1RevoSummitT-Maxx

This is the Traxxas Boat Stand for use with the Spartan and Blast boats. Display your Traxxas V-bottom boat securely with this multi-configuration boat stand. FeaturesBlack plastic constructionFour piece design interlocks together for easy assembly and...

This is the RPM Blue Rear Bumper/Wheelie Bar Mount for the Traxxas Slash 2WD, Rustler, Stampede 2WD, and Bandit vehicles.After hearing numerous requests to look into the rear bumper mount on the Traxxas Slash, we found several issues that could use the...

This is the Robinson Racing Gen3 Slipper Kit with 54-Tooth 0.8M Steel Spur Gear for the Traxxas Slash 4x4 trucks. GEN3 Slipper Units will not fail under the enormous load conditions of today's high-performance brushless motor systems. The new GEN3...

These are the Traxxas Rear Stub Axles for the Bandit, Stampede, Rustler, and Slash. Features: Metal construction, black and silver in color Includes: Two rear stub axles and pins Specifications:Length: 1.65" (42mm)Diameter: .51" (13mm) at...