This is the GPM Racing Red Aluminum Front Gearbox for Traxxas Slash 4x4, Rustler 4x4, Stampede 4x4, 1/10 Rally, and XO-1 vehicles. Made of 6061-T6 aluminum, these are super rigid and prevent flex that can lead to damaged differential gears. They look...

These are the GPM Racing Black Aluminum 17mm Extension Hubs with 12mm Hex for Traxxas 1/10 Slash 4x4, Stampede 4x4, Rustler 4x4, and other trucks listed below. This is a full set of four extensions. Made of 6061-T6 aluminum, these are a great option to...

This is a pair of GPM Racing Gunmetal Aluminum Spare Tire Locking Nuts for the Traxxas Unlimited Desert Racer (UDR) trucks. The replace the stock locknut for a far more realistic appearance. They are made of 6061-T6 aluminum and anodized for a...

These are the GPM Racing Chrome Steel Machined Front Spiral Cut Differential Ring and Pinion Gears for the Traxxas X-Maxx 8S trucks. This set is a 42T ring gear and 13T pinion gear. Made of chrome steel with spiral cut teeth, these gears are super...

This is the GPM Racing Green Stainless Steel and Aluminum Rear CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Slash 2WD, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These feature stainless steel axles and CVD joints,...

This is the GPM Racing Blue Aluminum Front Caster Block Set for the Traxxas 4-Tec 2.0 cars. Made of 6061-T6 aluminum with an anodized finish, these are durable and add a vibrant look to your performance machine. These also feature Delrin collars at the...

This is the GPM Racing Blue Aluminum Motor Mount Plate with Heat Sink Fins for Traxxas 4-Tec 2.0 cars. Made of 6061-T6 aluminum, this mount is strong and helps dissipate excess heat from the motor. It has the full series of motor mounting holes for...

This is the GPM Racing Red Aluminum Rear Shock Tower for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, and Bandit vehiclesThis is a direct replacement for the stock Traxxas part 3638 shock tower.Accessory Part ForTraxxas 1/10 Monster Jam...

These are the Traxxas E-Revo 2 Transmission Yokes and 4x15mm Screw Pins (2).Stock Replacement OnE-Revo 2.0

This is the Traxxas E-Revo 2 Heavy Duty Steel CV-Driveshaft (shaft only, 122.5mm).Stock Replacement OnE-Revo 2.0

These are the Traxxas Unlimited Desert Racer Method Race Wheels (2). Replica 101 Method Race Wheels with black beadlock-style rings fit Unlimited Desert Racer 17 mm hex hubs. Designed to fit 8470 BFGoodrich tires. Sold as a pair. Accessory Part...

This is a set of four Traxxas Black Aluminum 5mm Flanged Serrated Nylon Locking Nuts Lightweight and great looking, these 5 mm anodized aluminum flanged lock nuts are the perfect finishing touch for your vehicle. The serrated flange and nylon locking...

This is the Traxxas 20-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear. The heavy-duty 20-tooth (32-pitch) pinion gear is machined from...

These are the RPM Black LaTrax Alias Prop Guards (Pair). These are ultra durable, and weight only 4 grams per guard.The LaTrax Alias is a fun and capable entry-level quadracopter. However, a simple propeller blade strike can easily take out one of its...

These are the Traxxas 4-Tec 2.0 C-Hub Caster Blocks and Kingpin Bushings. These fit both the Ford GT and Mustang GT versions.Includes1 Left castor block1 Right castor block4 Kingpin bushingsFits4-Tec 2.0

This is the Hot Racing 12mm to 17mm Hex Hub Adapters with 10mm Offset for Traxxas Slash 4x4, Stampede 4x4, Telluride, Associated ProLite 4x4, and Losi TEN-T vehicles.These adapters are compatible with many 1/10th scale vehicles with factory 12mm hex hubs...

This is the Hot Racing Complete Front and Rear Adjustable Sway Bar Set for the Traxxas 1/16 E-Revo, Slash, and Rally vehicles. This will work on brushed and VXL brushless versions. Add this sway bar set to your vehicle for improved stability through...

This is the Hot Racing Hardened Steel 55-Tooth Spur Gear for Traxxas 1/16 Vehicles such as the 1/16 E-Revo, 1/16 Slash 4X4, 1/16 Summit, and 1/16 Rally.FEATURES:- CNC machined light weight hardened steel construction- Replaces stock nylon pinion gear-...

This is the Hot Racing Hardened Steel 86-Tooth 48-Pitch Spur Gear for Traxxas Slash 2WD, Stampede 2WD, Rustler, and Bandit vehicles. This will fit XL-5 brushed and VXL brushless trucks.FEATURES:- CNC machined and lightened hardened steel construction-...

This is a pair of Traxxas X-Maxx 8S-Rated Maxx AT Tires Pre-Mounted on Black Wheels. These feature the tougher 8S-rated rubber compound. Add some high-impact style to your X-Maxx and XRT with these ready-to-mount wheels and tires. The wheels come...

This is a set of four Traxxas Blue Body Clip Retainers. These body pin retainers are perfect for keeping your clips from going missing when prepping your boat at the lake.FitsDCB M41Spartan

This is a set of 4 Traxxas 7075-T6 Hard-Anodized Aluminum Pivot Balls and Pivot Ball Cap Bushings. These fit the 1/10 E-Revo, 1/10 Summit, E-Maxx, T-Maxx, Revo 3.3, Slayer, and more!These trick, hard-anodized 7075-T6 aluminum pivot balls are...

This is the RPM Blue Front Bulkhead Set for the Traxxas T-Maxx .15, 2.5, 3.3, E-Maxx, and E-Maxx Brushless trucks. These are backed by RPM's industry-leading lifetime breakage warranty.Until now, the Traxxas T-Maxx and E-Maxx line of trucks has been...

This the LaTrax Alias Quadcopter Blue Rotor Blade Set. It includes two rotor blades and two screws. Features: Plastic construction Flexible to withstand crashes Includes: Two Rotor Blades Two 1.6x5mm Button Head Cap Screws

This is the Robinson Racing GEN3 Slipper Kit with 65-tooth Steel Spur Gear for the Traxxas E-Revo Brushless and E-Maxx Brushless trucks.Robinson Racing GEN3 Slipper Units are over-engineered to meet the punishing demands of the most powerful brushless...

This is the Traxxas Steering Arm and Shock Mount Set for use on the 1/16 vehicles including the E-Revo, Slash, Summit, Mustang, Fiesta, and Rally vehicles.FEATURESNylon construction Black in...

This is the RPM Blue Sealed Transmission Gear Cover for Slash 2WD, Stampede 2WD, electric Rustler, and Bandit vehicles. These are recommended for spur gears up to 87-teeth.The most recent electric versions of the Rustler, Stampede, Bandit and Slash 2wd...

This is a pair of Assembled and Glued Rear Victory Tires and Wheels for the Traxxas Jato 2.5 and 3.3 trucks.  These are direct replacments for the originals, and if you are running on tar or cement, you know how quickly tires can go. ...

This is the Traxxas 2055 High-Torque Servo.  This has 80 oz/in of torque, making it an excellent steering servo.  This works well in the Traxxas T-Maxx, E-Maxx, Revo or any other vehicle that you would like to mount this in...

This is a Traxxas Revo 2.5 and 3.3 Linkage Set.  This includes the throttle & brake linkage, linkage rods, springs, thumb nut, & various other hardware.

This is the Integy Black Aluminum Type II Front Bumper for the Traxxas Stampede 2WD, Rustler, and Bandit. FEATURES Aluminum construction Black in color INCLUDESOne Type II Aluminum Front Bumper REQUIRESInstallation on the vehicle COMMENTSAlso...

This is the GPM Orange 7075 Alloy Transmission Cush Drive Housing Made with a quality light weight high tensile strength aluminum 7075 for greater durability and higher stability while running the truck. The upgrade minimizes the gap between the gear and...

This is the GPM Green 7075 Alloy Transmission Cush Drive Housing Made with a quality light weight high tensile strength aluminum 7075 for greater durability and higher stability while running the truck. The upgrade minimizes the gap between the gear and...

This is the Savox SH-0263MG Micro Digital Servo w/ Soft Start, 0.10/30 @ 6v The Savox SH-0263MG metal-gear, digital, micro servo is quick and built tough. "Plus" series servos feature Soft Start and Sanwa SSR compatibility. Features Metal gear train...

This is a pair of Pro-Line Badlands MX28 2.8 Tires on F-11 Black Wheels with 12mm Hex for Traxxas Electric 2WD Rear. These are a great upgrade for Traxxas electric Stampede 2WD and Rustler 2WD trucks.Tire Features Awesome Motocross-Inspired...

This is the Hot Racing Heavy Duty Splined Front Center Drive Shaft with Planetary Gear Housing for Traxxas Unlimited Desert Racer trucks. This is a great way to upgrade one of the weak points in the UDR driveline.This upgrade replaces Traxxas parts 8556...

These are the GPM Racing Green Aluminum Adjustable 102mm Piggyback Rear Shocks for Traxxas Slash 4x4, Rustler 4x4, and Stampede 4x4 trucks. Made of 6061-T6 aluminum, with a beefy 4mm steel shock shaft, these are a great upgrade for bashers and show...

This is the GPM Racing Gunmetal Aluminum Steering Servo Arm Horn for 25T Spline Servos on the Traxxas X-Maxx trucks. These fit the Traxxas 2085 and 2085X servos only.This is an upgrade for the stock Traxxas servo arm in part 7747.Accessory Part...

This is the GPM Racing Black Hardened Steel Front CVD Driveshaft Set for Traxxas 4-Tec 2.0 cars. Made from #45 hardened steel, these shafts are built to withstand a hot rod 4-Tec 2.0 setup.These can be used as an upgrade for Traxxas part 8350, 8354, or...

This is the GPM Racing Black Aluminum Cush Drive Housing for Traxxas E-Revo 2.0 and X-Maxx 8S trucks. Made of 6061-T6 aluminum, this is an excellent upgrade and looks great as well.Direct replacement upgrade for Traxxas part 7793X cush drive housing...