These are the Traxxas Rear Alias Tires Pre-Mounted on 2.8" Black Chrome All-Star Wheels for the Rustler XL-5 and Rustler VXL trucks. These have a 12mm hex, and are designed for the rear of the truck.Features:2.8" All Star black chrome wheelsRibbed...

This is a pair of Traxxas Front Anaconda Street Tires Pre-Mounted on Tracer Chrome Wheels for used on the Bandit XL-5 and VXL buggies. The wheels have a slotted hub on the back to slide over the pin on the axles.FEATURES:Rubber Anaconda 2.2" tiresSplit...

This is the Front and Rear Body Mount Set for the Traxxas Slash 2WD, Stampede 2WD, and Rustler trucks.  This includes front and rear body mounts with 6.5mm, 25mm, 38mm, and 52mm body post extensions Front and rear body posts and mounts. Includes the...

This is the Traxxas Center Differential Kit for the 1/16 E-Revo, Slash, and Summit vehicles. OverviewThe optional center differential helps balance the E-Revo VXL’s power distribution to reduce front end lift on acceleration and improve steering...

This is a Team Integy Aluminum Motor Heatsink with Cooling Fan (Red) for the Traxxas Slash 2WD, Stampede 2WD, Rustler and Bandit vehicles. This will only fit XL-5 versions.Heat is the enemy, especially when it comes to electric motors. Keep your...

This is the Traxxas Rear Suspension Arm Set for use on the 1/16 E-Revo VXL 4WD. Features: Nylon construction Black in color Includes:One Lower Right Suspension ArmOne Lower Left Suspension ArmTwo Rear Upper Left/Right Suspension Arms

This is a Team Integy Rear Progressive Spring Set for use on the Traxxas Slash trucks.  This includes three pairs of springs for more tuning options. Features: Steel construction Includes:Two Rear Red SpringsTwo Rear Yellow SpringsTwo Rear...

This is the Traxxas Titan 775 10-Turn Motor for the Traxxas 1/10 Summit. High-torque gets its spin from the largest brushed motor offered by Traxxas, the Titan 775. This massive mill is equipped with a fan-cooled five-pole armature for non-stop off-road...

This is the Traxxas Wheelie Bar for 1/16 E-Revo The patented Traxxas 1/16 scale adjustable wheelie bar features four position adjustment. The wheelie bar is intended for hard, high-traction surfaces where controlling wheelies can be difficult. The...

This is the Traxxas replacement #3631 Front Suspension Arms for for the Stampede 2WD and Rustler. FEATURES:Made from black molded nylon for the Traxxas Stampede 2WD and Rustler. SPECS:Length: 3 1/4"Thickness: 3/8"Width at end near chassis: 1 1/2"Width at...

This is the Blue Silicone Pipe Coupler for the T-Maxx 2.5 This goes between the tuned pipe and the header FEATURES:Blue silicone constructionFor use with pipes #5152 and #4452 INCLUDES:One pipe coupler REQUIRES:Installing on the vehicle with wire...

This is the GPM Racing Black Aluminum Rear Bumper with D-Rings for the Traxxas 1/10 E-Revo 2.0 VXL, Revo 3.3 nitro, as well as previous generation 1/10 E-Revo trucks. Whether you're building a realistic monster truck or the ultimate off-road basher,...

These are the GPM Racing Stainless Steel Adjustable Turnbuckle Links for Sway Bars on Traxxas Unlimited Desert Racer trucks. This set will upgrade both the front and rear links on the UDR, for a much more beefy setup than stock. Stainless steel...

This is the GPM Racing Red Steel and Aluminum Front CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These feature steel axles and CVD joints, with the main shaft made of...

This is the Traxxas TRX-4 Sport Front Bumper (178mm wide) with Mach Winch and 2.6x8 screw.Stock Replacement OnTRX-4 Sport

These are the Traxxas Unlimited Desert Racer Center Front Driveshafts with 4mm screw pin and 3x10 Capscrew.Stock Replacement OnUnlimited Desert Racer (UDR)

This is the Traxxas 17-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear.Accessory Part For1/10 E-Revo BrushedE-MaxxSlash 4x4...

This is the Traxxas Spur gear, 46-tooth (1.0 metric pitch). 46-tooth spur gear (1.0 metric pitch). Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different...

This is the Traxxas High-Volume Air Filter Body and Filter for the T-Maxx 2.5 and 3.3 nitro trucks. This comes with the filter support, cap, foam filter, T-Maxx filter base (angled), wire mount and hardware.FitsS-MaxxSportmaxxT-Maxx 2.5T-Maxx 2.5RT-Maxx...

This is a pair of Traxxas Green 6061-T6 Aluminum 30-Degree Castor Blocks with vertical suspension screw pins. These high-quality aluminum castor blocks are strong, precise, and look great! These fit Slash 2WD, Stampede 2WD, Skully, Craniac, Rustler,...

This is the Traxxas XL-5 Waterproof Electronic Speed Control (ESC). This comes pre-wired with the Traxxas high-current connector. Designed and engineered by Traxxas, the XL-5 Electronic Speed Control handles the elements while smoothly supplying power...

This is the MIP C-CVD Driveshaft Set for the Traxxas Slash 2WD (XL-5 and VXL versions), Nitro Rustler and Nitro Stampede vehicles. FEATURESSteel construction INCLUDES Two C-CVD BonesTwo AxlesTwo Outdrive CupsTwo Capture RingsTwo Drive PinsTwo Cross...

This is a set of RPM Axle Carriers/Steering Blocks in Black for the Traxxas Revo 2.5, 3.3, E-Revo, Slayer, T-Maxx 2.5R, 3.3, and E-Maxx 16.8V trucks.  Oversized bearings are included.  These come with the RPM lifetime limited warranty...

These are Traxxas Aluminum Left and Right Steering Blocks for the 1/10 scale Slash 4x4, Stampede 4x4, Telluride, and 1/10 Rally vehicles. Precision-machined for total steering accuracy and bulletproof strength, Traxxas Aluminum Steering Blocks further...

These are the Traxxas Differential Output Yokes and Screw Pins for the Traxxas Bandit, Stampede 2WD, Slash 2WD, and Rustler trucks.FEATURESBlack plastic constructionINCLUDESTwo differntial output yokesTwo 3x5mm countersunk screwsTwo screw...

This is the Revolver Black Rock Crawler Wheels Wide Wheelbase from RPM Products. FEATURES: Black 10-hole pattern design Reinforced for strength and minimal weight Made of a nylon material Uses 12mm hex & max axle size = 6mm INCLUDES:Two 10-hole...

This is a Traxxas Jato 2.5 and 3.3 Engine Mount with Spacers.  This includes one silver engine mount, two engine mount spacers, four 3mm x 15mm socket head screws with washers, two 4mm x 18mm button head screws, and two 3mm x 10mm flat head screws.

This is an Integy Blue Aluminum Front Skid Plate for the Traxxas T-Maxx .15, 2.5, 3.3, E-Maxx, and all other Maxx series trucks.  It will fit all versions of the T-Maxx and E-Maxx.  As you can see in the picture, this skid...

This is the Traxxas Mini XRT LED Light Kit The Mini XRT LED light kit is built Traxxas Tough, with factory fit and finish for easy installation. The kit includes a replacement front bumper with installed LED light bar and roof skid with integrated...

This is the Traxxas Magnum 272 Black Gearbox Halves (L&R) Black gearbox halves (L&R) for Magnum 272 transmission. Includes idler gear shaft. Will not fit Magnum 272R transmission.

This is the Traxxas Mini XRT LED Light Kit LED light kit, Mini XRT, complete (includes front bumper with LED lights, roof skid plate with LED lights, 3-volt accessory power supply, and power tap connector (with cable) **Fits 10712-series Bodies Only.

This is the Spektrum Smart Powerstage Air Bundle: G2 2200mAh 4S 50C LiPo IC3 Battery (2) and S250 Charger Smart Powerstage 4S Air BundleThis Spektrum Smart Powerstage 4S Air Bundle is the perfect fit for any hobbyist’s budget with everything you...

This is the Spektrum Smart Powerstage Air Bundle: G2 2200mAh 3S LiPo IC3 Battery and S155 Charger Smart Powerstage 3S Air BundleThe Spektrum 3S Smart Powerstage Bundle is a one-box solution for aircraft requiring a 3S LiPo battery. This bundle is...

This is the Spektrum 850mAh 3S 11.1V 30C Smart G2 LiPo Battery w/IC2 Plug Spektrum Smart G2Pilots and drivers enjoy more Smart benefits with Spektrum Smart G2 30C LiPos. Not only are charging parameters and performance data stored and uploaded...

This is the Traxxas ProGraphix Summit Yellow Body Paint (5oz) Traxxas ProGraphix Custom RC Paints deliver professional-grade, airbrush-like results with the easy application and convenience of aerosol cans. Features Ultra-fine spray Fast...

This is the Traxxas ProGraphix Fluorescent Purple Body Paint (5oz) Traxxas ProGraphix Custom RC Paints deliver professional-grade, airbrush-like results with the easy application and convenience of aerosol cans. Features Ultra-fine spray Fast...

This is the Traxxas Mini Maxx LED Light Kit The Mini Maxx LED light kit is built Traxxas Tough, with factory fit and finish for easy installation. The kit includes new front and rear bumpers with white forward-facing LEDs, and rear-facing red LEDs. The...

This is the Hitec RDX1 200 AC/DC Smart Balance Charger - (AC) 100W / (DC) 200W RDX1 200Hitec’s RDX1 200 is a compact and versatile charger designed to speedily charge your packs and meet the diverse needs of the entire RC community. Perfect for use...

This is the Savox SV-0236MG High Voltage 1/5 Scale Servo 0.17sec / 555.5oz @ 7.4V The SV0236MG is a large scale, and digital servo. It is metal-geared with an amazing amount of torque while capable of operating on high voltage. "Plus" series servos...

This is the Pro-Line Mirage TT 2.2"/3.0" BELTED SC Tires Mounted on Raid Black 6x30 Removable Hex (12mm & 14mm) Wheels (2) Pro-Line is proud to announce a tire and wheel combo for your Short Course Desert Truck! The Mirage TT is inspired by full-size...