This is a pack of Traxxas 4x12mm Countersunk Machine Screws (100-degree). Each package includes six screws.Fits:1/10 Monster Jam TrucksBandit XL-5CraniacRustler XL-5SkullyStampede XL-5 2WD

This is an assortment of e-clips, c-clips, and body clips for the Traxxas line of cars and trucks. Includes: 28 of the 2.5mm E-clips, 2 of the 3mm E-clips, 3 of the 5mm E-clips, 4 of the shock C-clips and 3 body clips.

These are RPM Camber Links for the Traxxas Electric Rustler and Electric Stampede 2WD vehicles. RPM’s heavy-duty camber links will completely eliminate broken camber links on your Rustler or Stampede 2WD! RPM guarantees it! These camber links are...

This is the 25-tooth Pinion Gear (48-pitch) with Set Screw 25-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance...

This is a pair of Traxxas 2.8" Mounted Alias Rear Tires on All Star chrome wheels. These are perfect for the rear of the Traxxas Rustler XL-5 and VXL vehicles. FEATURES:2.8" All Star chrome wheelsRibbed pattern tires INCLUDES:Two 2.8" mounted tires,...

This is the Battery Expansion Kit for the Traxxas Rustler and Stampede 2WD, and Monster Jam trucks. It will fit both the XL-5 brushed and VXL brushless models. The package includes hardware to raise the electronic speed control mount and battery posts...

This is an RPM Black Upper and Lower Suspension A-Arm set for the Traxxas T-Maxx 2.5, 2.5R, 3.3, as well as the E-Maxx trucks.  These will also fit other trucks that came with the WideMaxx suspensions such as the SportMaxx...

This is the Team Integy 53-Tooth Steel Spur Gear for the Traxxas Jato 2.5, 3.3, and T-Maxx 3.3 trucks.  This is MUCH stronger than a plastic spur gear.  The Integy spur gears feature color-coded rings to allow easy identification...

This is the Scaleauto Stadium Light Towers (40cm) Scaleauto Scenics CollectionStadium Light Towers SpecificationsMade from pre-painted PVC materialAssembled Approx Size: 40cm **Assembly Required Scale1/32 Scale

This is the Scaleauto Stadium Light Towers (25cm) Scaleauto Scenics CollectionStadium Light Towers SpecificationsMade from pre-painted PVC materialAssembled Approx Size: 23-25cm **Assembly Required Scale1/32 Scale

This is the Scaleauto Dunlop Two-Lane Overpass Bridge: 380mm Scaleauto Scenics CollectionDunlop Bridge For 2 Lane Tracks SpecificationsAssembled Size: 38cm Width from end to end **Assembly Required Scale1/32 Scale

This is a pair of GPM Racing Red Aluminum Spare Tire Locking Nuts for the Traxxas Unlimited Desert Racer (UDR) trucks. The replace the stock locknut for a far more realistic appearance. They are made of 6061-T6 aluminum and anodized for a fantastic...

This is the GPM Racing Black Aluminum Front/Rear Gearbox Skid Plate for Traxxas TRX-4 scale trail trucks and rock crawlers. Made of lightweight 6061-T6 aluminum with an anodized finish, these are durable and look great. These can be mounted on the...

This is the GPM Racing Complete Stainless Steel Heavy-Duty Tie Rod and Suspension Link Set for Traxxas Rustler 4x4, Slash 4x4 low-CG trucks such as the Ultimate & Platinum, and 1/10 Rally vehicles. This set comes with front camber links, steering links,...

This is the Traxxas Rustler 4x4 Black Wing with 3x8mm Flathead Capscrews (3).Stock Replacement OnRustler 4x4 BrushedRustler 4x4 VXL

This is a full set of four Traxxas 1.9" Response Tires Pre-Mounted on Split Spoke Black Chrome Wheels for the Traxxas 4-Tec 2.0 cars. Foam inserts are pre-installed as well. The set includes two front wheel/tires, and two extra-wide wheel/tires for the...

This is the Traxxas 16-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear.Accessory Part For1/10 E-Revo BrushedE-MaxxSlash 4x4...

This is the Traxxas 14-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear.Accessory Part For1/10 E-Revo BrushedE-MaxxSlash 4x4...

This is a pair of Traxxas Pink Rear Springs for Stampede, Slash 2WD, Rustler, and many other vehicles. These fit the Traxxas XX-Long Ultra Shocks.Accessory Part ForBIGFOOT No. 1 Officially Licensed ReplicaFord F-150 RaptorHoss 4X4 VXLNitro SlashRustler...

These are the Hot Racing Black Aluminum Piggyback Adjustable Rebound Shocks for Traxxas 1/16 E-Revo, Slash, Rally, and Summit. These will work on the brushed and VXL brushless versions of the vehicles.FEATURES:- CNC 6061-T6 billet aluminum shock damper...

This is a pair of Traxxas Green Beadlock Style Sidewall Protector with Screws for use with Traxxas Geode 3.8" Wheels.Includes:Two Green Sidewall ProtectorsTwenty Four 2x6mm ScrewsSpecificationsInner Diameter: 3.1" (79mm)Outer Diameter: 3.9" (100mm)Fits...

This is the Traxxas Red Aluminum Antenna Crimp Nut with Nut Wrench, for use on many Traxxas vehicles including the Revo, E-Maxx, Jato, Slash 2WD, and T-Maxx trucks.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitE-MaxxE-Maxx BrushlessJato 2.5Jato...

This is the Traxxas Stampede 4x4 LED Lightbar with 4 LEDs. This is a fully-functioning lightbar set that can be powered off an open port on the receiver. Everything required to use this light bar set is included! It can be used on the Stampede 4x4 and...

This is the RPM Black Front Low-CG Bulkhead for Traxxas Slash 4x4 Ultimate, 1/10 Rally, and Slash 4x4 trucks with the low-CG conversion. Adding these to your truck will increase durability and simplify maintenance due to the two-piece design.Designed...

These are the Traxxas Red Aluminum Turnbuckles with rod ends for the 1/10 Stampede XL-5 and VXL 2WD trucks.Traxxas’ aluminum turnbuckles make it easy to add strength and adjustability to your Traxxas model.  These turnbuckles come in an amazing...

These are Traxxas Non-Adjustable Front and Rear Camber Links for the Rustler and Stampede XL editions. Features: Gray plastic construction Includes: Two short links, Two long links Specifications:ShortLength: 77 mm (3.03")Width: 9 mm...

This is the Complete Planetary Gear Differential With Steel Ring Gear for the Traxxas Bandit, Stampede and Rustler. FEATURES:Metal gear shaftsMetal and plastic main differential INCLUDES:Main differential with steel ring gearPlanetary gears and shaftsSun...

This is the Replacement Roller Clutch for the Traxxas 2.5 and 3.3. This is located at the EZ Start end of the crankshaft. This is the One Way bearing for the EZ starter and is also used with a pull starter FEATURES:Steel construction INCLUDES:One roller...

This is a pair of Integy Blue Aluminum Rear Lower Suspension Arms for the Traxxas Jato 2.5 and 3.3 trucks.  These suspension arms look great, but they are very strong as well.  These arms make a great addition to show trucks, as well...

This is the GPM Racing Blue Aluminum Front Gearbox for Traxxas Slash 4x4, Rustler 4x4, Stampede 4x4, 1/10 Rally, and XO-1 vehicles. Made of 6061-T6 aluminum, these are super rigid and prevent flex that can lead to damaged differential gears. They look...

These are the GPM Racing Black Aluminum Rear Shocks for Traxxas 1/10 Slash 4x4, Rustler 4x4, and Stampede 4x4 trucks. Made of 6061-T6 aluminum and with a monster 4mm shock shaft, these shocks are built to last. They include three full spring sets (1...

This is the Traxxas Unlimited Desert Racer Satin Black Chrome-Plated Front Bumper and Support. These bolt right in with a perfect factory fit, adding a new level of scale realism to the UDR!Accessory Part ForUnlimited Desert Racer (UDR)

This is the Traxxas 31-Tooth 0.8 Mod Pinion Gear with Set Screw for 5mm Shaft Motors.Accessory Part ForUnlimited Desert Racer (UDR)

This is the RPM Blue Heavy Duty Camber Link Set for Traxxas electric Rustler, Stampede 2WD, Skully, Craniac, and Bigfoot trucks. These are direct replacements for the molded links on the XL-5 versions of these trucks. These replace Traxxas 3641 and...

These are the Hot Racing Carbon Fiber Stock Length Slipper Clutch Pads, for use in place of Traxxas 5352 or 5552 slipper pads. These fit Traxxas Bandit, E-Maxx, E-Revo, Jato 3.3, Rally VXL, Revo 3.3, Rustler, Slash 2WD, Slash 4X4, Slayer Pro 4X4,...

This is the RC4WD Superlift Adjustable 90-120mm Steering Stabilizer. These can be used for steering links, or panhard bar mounts. They are highly detailed and adjustable for any project. FeaturesCNC MachinedSuperlift Decals...

This is the Traxxas Drive Dog and Set Screw for the Spartan and DCB M41 Boats. Drive dog with stainless 4x3 mm grub screwReplacement Part ForDCB M41 WidebodyDisruptorSpartan SRSpartan

This a bottle of 10K Weight Diff Oil (1.75 oz / 50cc) with a filler nozzle. This oil can be used in a wide range of Traxxas vehicles to help tune the differentials for optimum performance.For use with these vehicles and more!1/10 E-Revo Brushed1/10...

This is the RPM Black ESC Cage for Castle Sidewinder 3 and Sidewinder SCT ESCs. The RPM ESC Cage fits in the stock location on the Traxxas Slash 2WD, Slash 2WD LCG, Slash 4x4, Slash 4x4 LCG, Stampede 4x4, Rustler VXL, Bandit VXL, and 1/10 Rally, while...

This is the RPM Green Wide Front Bumper for the Traxxas electric Rustler, electric Stampede 2WD, Bandit, Nitro Rustler, and Nitro Stampede trucks. At over six inches wide, this offers the ultimate in protection for your ride!Give your favorite Traxxas...