This is a pair of Stub Axle Carriers for the Traxxas Bandit, Stampede and Rustler VXL. FEATURES:Molded nylon construction (black) INCLUDES:Two stub axle carriers REQUIRES:Installation on the vehicle

This is a Traxxas Jato 2.5, 3.3, and T-Maxx 3.3 Antenna Crimp Nut and Antenna Nut Wrench.  This includes the antenna crimp nut and the wrench.

This is a Traxxas 37-Tooth Ring and 13-Tooth Pinion Gear Set for the Traxxas T-Maxx .15, 2.5, 2.5R, 3.3 (model 4909 only), and E-Maxx (model 3906 only).  The differential carrier is also included. FEATURES:Replaces worn differential...

This is the Pro-Line Rat Rod Clear Body for Traxxas 1/10 Revo 3.3, E-Revo, E-Revo 2.0 and Summit trucks. The body is supplied clear, but is painted in the image to better show the design. Truck is not included. FeaturesCustom Rat Rod stylingScale...

This is the Gen3 RC 8-Piece Bearing Kit for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, and 1/10 Rally Front Steering Blocks and Rear Stub Axle Carriers.Features Super durable black rubber seals offer excellent protection against the harshest...

These are the RPM Black Front Left Suspension A-Arms for Traxxas E-Revo 2.0 trucks. While Traxxas may have beefed up the E-Revo 2.0 suspension arms, they’re still not nearly as tough as RPM versions, nor are they as light. RPM A-arms weigh in 5 grams...

This is the Gen3 RC 6061-T6 Orange Aluminum Stage 3 Upgrade Set for the Traxxas Rustler 2WD trucks. This set can be used on the XL-5 and VXL versions. Made of 6061-T6 aluminum, these parts are built to improve strength, look great, and tighten up the...

This is the Hot Racing Aluminum Front Body Post Set for the Traxxas 1/16 E-Revo, Slash, and Rally vehicles. These will fit 1/16 brushed and VXL brushless versions of these cars.FEATURES:Aluminum ConstructionBlack in ColorCNC MachinedYOU WILL RECEIVE:Two...

This is a pair of Traxxas Maxx Chevron Tires with Foam Inserts for use with 3.8" Revo and T-Maxx/E-Maxx wheels. These are a great way to give you RC the true off-road monster truck look!FeaturesReplaces damaged or worn tiresConstructed of...

This is the Traxxas Bandit Wing Wire. This will fit the Bandit XL-5 and Bandit VXL buggies.

This is the Traxxas Propeller Shaft Flex Cable Set for the Traxxas Spartan Boats. Replacement propeller shaft (flex cable) SpecificationsLength: 387.35mm (15.25")Prop Shaft Diameter: 5mm (0.20")Flex Cable Diameter: 4mm (0.16") Replacement Part ForSpartan

This is the Hitec HS-5055MG Digital MG Metal-Geared Sub-Micro Servo. Providing 22 oz/in of torque at 6V, this is a great little servo for many projects. Since its introduction, the HS-55 has set the standard for affordable performance, offering...

This is a pair of RPM Chrome Revolver 2.2" Wheels for front of the Traxxas Electric Rustler and Electric Stampede 2WD, or the rear of Traxxas nitro vehicles like the Jato, Nitro Rustler, Nitro Sport, and Nitro Stampede. This can also be used on the...

This is the Team Integy Super Brushless Motor Heatsink (Red) with cooling fan for use on the Traxxas 1/16 E-Revo and Slash VXL. This heatsink snaps onto the motor can.FEATURESAluminum construction red...

This is the Short RPM Sensor for Traxxas models. FeaturesThe RPM sensor plugs directly into your TQi receiver to provide real-time speed and RPM data while you drive. Real-time telemetry requires a telemetry magnet, TQi radio with Traxxas...

This is a set of Gemini Chrome Wheels and Talon Tires for the Traxxas Revo, T-Maxx and E-Maxx. The wheels have a 17mm splined hex.FeaturesFive spoke chrome plated wheel construction Talon tires are treaded soft compound low profile construction with...

These are the Pro-Line PowerStroke Rear Shocks Spring Assortment Features Six Primary Springs (black/short) Six Secondary Springs (silver/long) Color coded stripes to identify rates Spring rate chart available showing spring all combinations and...

This is the GTR Shock Rebuild Kit by Traxxas. FEATURES:Shock rebuild parts INCLUDES:Four blue plastic shock pistonsTwo blue rubber diaphragmsFour black plastic shock endsTwo piston lock nutsFour metal X-rings COMMENTS:This set will rebuild two shocks

This is the Traxxas Front 37T Differential Ring and 13T Pinion Gear 37-tooth ring and 13-tooth pinion gears for front differentials. Replacement Part ForFord Fiesta ST RallyFord F-150 Raptor R 4X4Ford Fiesta ST Rally BrushlessFord Fiesta ST RallyHoss 4X4...

These are the Traxxas Blue Aluminum Wheelie Bar Wheels and Rubber Tires for the Traxxas Wheelie Bars (model 4975 and 3678) for all Traxxas T-Maxx, E-Maxx, Jato, Slash 2WD, Slash 4x4, Rustler, Stampede 2WD, Stampede 4x4, and Bandit series vehicles.Traxxas...

This is the Hitec HS-82MG Metal Gear Micro Universal Servo.  Because this servo has the universal connector, it will work with JR, Hitec, Futaba, and Airtronics Z radio systems.  These are great for small planes, gliders, electric...

This is a pair of GPM Racing Black Aluminum Spare Tire Locking Nuts for the Traxxas Unlimited Desert Racer (UDR) trucks. The replace the stock locknut for a far more realistic appearance. They are made of 6061-T6 aluminum and anodized for a fantastic...

These are the GPM Blue Aluminum Front Steering Blocks for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, Rally, and Telluride vehicles. These are made of 6061-T6 aluminum and anodized for a beautiful finish.These are an upgraded replacement for...

This is the Traxxas TRX-4 Ford Bronco Spare Tire Mount, Bracket, Tire Cover and Hardware.Accessory Part ForTRX-4 Ford Bronco

This is the Hot Racing Aluminum Trim Cover Splash Guard for Traxxas Spartan boats. The splash guard looks great and helps prevent water from getting into the hull.FEATURES:- Adds stylish and realistic looks- Helps prevent water splashing and ingress of...

These are the Traxxas Motor Coupler, Collet, Hardware and Wrenches Collet-style motor coupler with 4x3 stainless grub screw with applied threadlock and 10 mm wrenches (2) Replacement Part ForDCB M41 WidebodyDisruptorSpartan

This is the Traxxas Stuffing Tube Seal and Pushrod Seal Stuffing tube seal and push rod hull seal Replacement Part ForDCB M41 WidebodyDisruptorSpartan

This is a pair of Traxxas Throttle Dust Boots and a Return Spring for use on the carburetors of the TRX 2.5, 2.5R, and 3.3 nitro engines.Fits:Jato 2.5 & 3.3Nitro 4-TecNitro Rustler 2.5Nitro SlashRevo 2.5 & 3.3SlayerT-Maxx 2.5 & 3.3

This is the Traxxas Auto-Detectable Smart Temperature Sensor. This plug-and-play sensor is designed for use with the Traxxas 6550 Telemetry Expander. The auto-detectable temperature sensor plugs into the optional TQi Telemetry Expander to provide...

This is a pair of stock replacement long half shafts for the Traxxas T-Maxx and E-Maxx.FeaturesDurable nylon constructionSteel u-jointsIncludesTwo long external splined half shaftsTwo long internal splined half shaftsFour u-joint...

This is the Complete Slipper Clutch for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.FEATURESSteel constructionINCLUDESOne Slipper Clutch HubOne Clutch PadOne SpringOne 3mm Locking Nut1.5x6mm...

These are the Traxxas Tubes Lightweight Aluminum Front Toe Link Turnbuckles for the Traxxas T-Maxx 3.3, E-Maxx 16.8V, and E-Maxx Brushless trucks. Traxxas TUBES are 30% lighter thant he stock steel toe links, plus they're 4-times stiffer and more than...

This is a set of Integy Blue Aluminum Servo Guards for the Traxxas Revo 2.5, 3.3, E-Revo, E-Revo Brushless, Summit, and Slayer Pro trucks. These servo guards look awesome, and are much stronger than stock. These are a must if you bash on your truck, or...

This is the GPM Racing Red Aluminum Front Shock Tower for Traxxas Slash 2WD, Rustler 2WD, Stampede 2WD, and Bandit vehicles. Made of 6061-T6 aluminum with an anodized finish, these are durable and help make your truck stand out! Stainless steel mounting...

This is the GPM Racing Complete Black Aluminum Steering Tie Rod and Suspension Pushrod Set for Traxxas 1/16 E-Revo and 1/16 Summit trucks. Made of 6061-T6 aluminum and then anodized to make them pop, these will add strength and good looks to your...

This is a pair of Traxxas Unlimited Desert Racer 139mm GTR 1.146 Rate Green Stripe Progressive Shock Springs.Stock Replacement OnUnlimited Desert Racer (UDR)

These are the Traxxas Pink Front and Rear Skid Plates for Stampede 2WD, Skully, and Craniac trucks.Fits1/10 Monster Jam TrucksCraniacSkullyStampede VXL 2WDStampede XL-5 2WD

This is a set of Traxxas LiPo Battery Charge Indicator Plug Set. The set includes four Green, four Blue, and four Grey indicator plugs. Use these plugs to know which batteries are fully charged, discharged, or in storage charge, and to protect the...

This is the Traxxas Spring, shock (GTR) (3.2 rate, purple) (1/16 Summit) (1 pair). This is Traxxas part number 7246Part Number: 7246 / TRA7246Fits1/16 Grave Digger1/16 SummitMore detail coming soon! Please check your vehicle manual to confirm vehicle...

This is the Traxxas Green Front Bumper, Mount, and Hardware for the Stampede 2WD, Craniac, Skully, and 1/10 Monster Jam Trucks.Fits1/10 Monster Jam TrucksCraniacSkullyStampede 2WD