This is the GPM Racing Complete Orange Aluminum Steering Tie Rod and Suspension Pushrod Set for Traxxas 1/16 E-Revo and 1/16 Summit trucks. Made of 6061-T6 aluminum and then anodized to make them pop, these will add strength and good looks to your 1/16...

This is the Pro-Line 1978 Chevy K-10 Clear Body for 12.3" Wheelbase 1/10 Scale Crawlers and Trail Trucks.The body is supplied clear, but is painted in the image to better show the design. Truck is not included.Features Fully Licensed 1978 Chevrolet K-10...

This is the GPM Racing Complete Gunmetal Aluminum Steering Tie Rod and Suspension Pushrod Set for Traxxas 1/16 E-Revo and 1/16 Summit trucks. Made of 6061-T6 aluminum and then anodized to make them pop, these will add strength and good looks to your...

This is the Traxxas High-Voltage BEC and Receiver Box Set for use with the TRX-4 scale and trail crawler trucks. This BEC provides the power necessary to run high-voltage servos in the TRX-4. Traxxas recommends the High-Output BEC, or battery eliminator...

This is the Traxxas 4-Tec 2.0 70-Tooth 48-Pitch Spur Gear. This 70T gear will fit all versions of the 4-Tec 2.0, including the Ford GT and Mustang GT.Stock Replacement On4-Tec 2.0 VXL Chassis4-Tec 2.0 XL-5 Chassis4-Tec 2.0 Ford GT4-Tec 2.0 Ford Mustang

This is a Traxxas Steel Slipper Clutch Shaft for the Slash, Rustler, and Stampede vehicles. Features: Steel construction Roll pin pre-installed Includes: One slipper clutch set Specifications:Length: 1.98" (50mm)Diameter: .21" (5mm)

This is the Traxxas Reverse Rotation Titan 550 Motor (21-Turn).  The Titan 550 reverse-rotation motor is a 21-turn fan-cooled 550 size powerhouse capable of handling 14.4 volts. This powerful motor has a 30% longer armature than a standard 540 size...

These are the Traxxas Red Aluminum Wheelie Bar Wheels and Rubber Tires for the Traxxas Wheelie Bars (model 4975 and 3678) for all Traxxas T-Maxx, E-Maxx, Jato, Slash 2WD, Slash 4x4, Rustler, Stampede 2WD, Stampede 4x4, and Bandit series vehicles.Traxxas...

This is the Hitec RDX2 1000 AC/DC Dual Port Charger/Power Supply With a sleek modern design and easy-to-transport handle, the RDX2 1000 is the AC/DC powerhouse you need to charge your high-capacity battery packs at rapid rates. The dual output ports each...

These are the Pro-Line Trencher LP 2.8 Low Profile Tires on Black Raid 6x30 Front or Rear Adjustable Offset Wheels (2). The removable hex design makes these super versatile, and easy to repair should you damage a hex. These can be used with Traxxas...

These are the Traxxas E-Revo 2 Black 17mm Splined Hex 3.8 Wheels (2).Stock Replacement OnE-Revo 2.0

This is the Traxxas TRX-4 Chrome Differential Cover. This will fit the front and rear diffs on the TRX-4 trucks.Stock Replacement OnTRX-4 Ford BroncoAccessory Part ForTRX-4 Crawler KitTRX-4 Land RoverTRX-4 SportTRX-4 Tactical

This is a pair of RPM Blue Upper and Lower Suspension A-Arms for the Traxxas X-Maxx 6S and 8S trucks. This includes one upper and one lower arm. The upper arm replaces Traxxas part 7729, and the lower arm can be used in place of Traxxas part 7730 or 7731...

This is the Integy Silver MSR9 Front Piggyback Shock Set for the Traxxas Stampede, Rustler and Slash FEATURES Aluminum Construction Threaded Aluminum Shock Bodies Piggyback Shock Oil Reservoir Knurled Spring Rate Adjuster Silver and Gun Metal in...

This is the GPM Racing Blue Aluminum Complete Turnbuckle Tie Rod and Camber Link Set for Traxxas 4-Tec 2.0 cars. These are machined from 6061-T6 aluminum for strength and durability, then anodized for a fantastic appearance.This set replaces all of the...

This is a set of GPM Racing Orange Aluminum 17mm Wheel Nuts for Traxxas X-Maxx and E-Revo 2.0 trucks. This is a full set of four nuts.These fit in place of stock Traxxas part 7758 series wheel nuts.Accessory Part ForTraxxas 1/10 E-Revo 2.0Traxxas...

These are the Traxxas Black Shock Caps with Hollow Balls (4). These come stock on the Ultra Shocks on the 4-Tec 2.0 vehicles like the Ford GT and Mustang GT, but will also work with other vehicles using Ultra Shocks.Replacement Part For4-Tec 2.0 AWD...

This is the Traxxas Bandit Rear Anaconda Street Tires Pre-Mounted on Chrome Tracer Wheels. These are a must-have for running your Bandit on the street. They last much better than the stock tires on a hard surface.Fits:Bandit XL-5Bandti...

This is the Slipper Clutch Rebuild Kit for the Traxxas Vehicles. The slipper clutch rebuild kit refreshes the standard-duty slipper clutch with a new disc, friction pads (3), springs (2), dowel pin, 4 mm locknut and 5 mm locknut. Fits: 5556 pressure...

This is the Traxxas 1200mah 5-Cell NiMh flat receiver battery pack for use in the Traxxas Jato, Revo, and Slayer Pro trucks.  This 6-volt pack gives the servos power, speed, and will allow longer run-times than smaller packs.  This high...

This is the Spektrum NX10+ 20 Channel Transmitter Only NX10+ 20-Channel DSMX TransmitterWith the Spektrum NX+ series, you'll enjoy the versatility needed to operate your models to their fullest potential and to fly complex aircraft like EDFs and...

This is the Traxxas Premium Shock Oil Set with Spinning Carousel Rack FeaturesSeven precise viscosities ranging from 20wt to 80wt100% silicone oil for maximum consistencyPrecision-pour, twist-nozzle capLarge 2 fl. oz bottle size Traxxas premium silicone...

This is the Traxxas 34-Tooth 0.8 Mod Pinion Gear with Set Screw for 5mm Shaft Motors.Accessory Part ForUnlimited Desert Racer (UDR)

This is the Traxxas X-Maxx Tailgate Protector with 3x8mm Flathead Screws (4). This fits on the rear of X-Maxx bodies for added protection. The X-Maxx tailgate protector provides additional strength for the rear lip of the body for added durability...

This is the RPM Black Tubular Front Bumper for Traxxas Revo 2.5, 3.3, 1/10 E-Revo, and E-Revo Brushless Trucks. RPM provides the added protection the Revo needs with unbelievable strength and durability in our tubular bumpers. RPM bumpers for the...

This is the RPM Black Steering and Caster Block Set for Traxxas Slash 4x4, Stampede 4x4,  Hoss 4x4, 1/10 Rally, and Telluride Trucks.Since the release of the first Slash 4x4, RPM customers have been asking for stronger front end components that...

This is a pair of Traxxas 6x13x5mm Rubber Sealed Ball Bearings for use on the Revo 3.3, 1/10 E-Revo, E-Maxx, Slayer, T-Maxx and X-Maxx trucks.FeaturesStainless Steel bearing constructionBlue rubber dirt shieldsIncludes: (2) 6x13x5mm ball...

These are the Team Integy Silver Aluminum Front Lower Arms for the Traxxas Electric Stampede 2WD, Rustler, and Slash 2WD trucks. These will fit the 1/10 scale XL-5 and VXL 2WD versions.FEATURESAluminum constructionSilver in colorINCLUDESTwo front lower...

This is the Savox SW-0231MG Waterproof Digital High-Torque Servo 0.15sec / 347oz @ 7.4V The SW-0231MG is a budget friendly, waterproof, high torque, digital servo in a slightly taller case than most standard sizes. This is a great upgrade if your looking...

These are the GPM Racing Blue Aluminum Rear Shocks for Traxxas 1/10 Slash 4x4, Rustler 4x4, and Stampede 4x4 trucks. Made of 6061-T6 aluminum and with a monster 4mm shock shaft, these shocks are built to last. They include three full spring sets (1...

These are the Traxxas Fixed Gear Ratio Adapters for use with 2WD Electric vehicles, including Bandit, Rustler, Slash, Stampede, and Bigfoot trucks. Take the guesswork out of setting gear mesh and ensure rock solid hold with Traxxas fixed gear adapters...

This is the Traxxas X-Maxx Suspension Pin Set for 1 corner. The X-Maxx requires 4 packs of these for complete set of hinge pins.Features Steel construction Fastens suspension arms to chassis and to front and rear uprights IncludesOne 4x85mm PinThree...

This is the Traxxas aluminum blue-anodized shock caps Aluminum shock caps are great way to boost the durability and style of any Traxxas vehicle equipped with Ultra Shocks. The machined caps fit precisely and hold tightly, run after run, jump after jump...

This is the Hitec JST-XH Balance Board for X2 and X4 Hitec Chargers. This will work with the X2, X4 DC, and the X4 Plus AC/DC chargers. It has XH balance plugs for 2S, 3S, 4S, 5S, and 6S batteries.FEATURESBalance lead and ports for 2-6S LiPo battery...

This is a set of 12 Traxxas 3mm Locking Nuts. These feature chrome nylon locking nuts. Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 SummitBandit VXLBIGFOOT No. 1 Officially Licensed ReplicaDCB M41 WidebodyDrag Slash 1967 Chevrole C10...

This is the Traxxas Stinger 20-Turn 540 size motor used in many Traxxas vehicles. This can be used in the Bandit XL-5, Stampede XL-5, Rustler XL-5, Monster Jam Replicas, Blast Boat, and others.Features:20-Turn high performance 540 motorPre-installed...

These are the Traxxas Steel Constant Velocity Driveshafts for the Traxxas T-Maxx 3.3, Revo 3.3, E-Maxx 16.8V and E-Maxx Brushless, E-Revo and E-Revo Brushless trucks. Traxxas Steel Constant Velocity Driveshafts are designed to handle the extreme...

This is the Traxxas Stock replacement EZ-Start Motor for the EZ-Start (original) System. This motor is what turns the engine over in order to start it.  This is for the original EZ-Start system, which was used on vehicles...

This is the HS-85MG Mighty Micro Metal-Geared Servo from Hitec.  It has a universal connector so it will work with JR, Futaba, and the new style Airtronics.  This produces 41.66 oz/in of torque at 4.8V, and 48.6 oz/in at 6V. FEATURES:...

This is the Viper Scale Racing (YELLOW) VSPEC w/ V17 Body and Pinned Rear Axle Ready to Race HO Slot Car * This chassis has the Rear Axle Pinned for greater performance NEW Look for the 917 VSPECThe VSPEC race car is a reliable, fast and fully...