This is the Integy Blue Aluminum Gear Box Cover for the Traxxas Stampede 2WD, Rustler, Slash 2WD and Bandit FEATURES Aluminum construction, anodized blue in color INCLUDESOne aluminum gear box cover REQUIRESInstallation on the vehicle COMMENTSFor...

This is a pair of Integy Blue Aluminum Castor Blocks for the Traxxas Stampede 2WD, Rustler & Slash 2WD FEATURES Blue Anodized Aluminum Construction INCLUDESOne pair of Blue Castor Blocks

This is the Brake Yoke w/Pins for the Traxxas Revo. It is use on the Center/Front Driveshaft Assembly. FEATURES:Plastic Brake YokeSteel Brake Pins(each knurled on one end)Steel Screw Pins INCLUDES:One Brake YokeTwo Brake PinsOne Screw...

This is the optional Traxxas Reverse Kit for the Traxxas Revo 3.3 trucks that do not use the Opti Drive module. All the parts you need, even the 2060 sub-micro servo, are included, getting you back out running in no time.FeaturesAdds mechanical reverse...

This is the Long Wheelbase Chassis for the Traxxas E-Maxx. FEATURES:Nylon construction, gray in colorReplaces worn or damaged chassis INCLUDES:One long wheelbase chassis REQUIRES:Installation on the E-Maxx SPECS:Length: 11.5" (292.1mm)Width: 6.5" (165...

This is a set of Rear Only 2.8" Mounted All Star Wheels and Tires for the electric Traxxas Stampede. FEATURES:2.8" All Star black chrome wheelsTalon tires with foam inserts INCLUDES:Two 2.8" mounted rear talon tires, All Star chrome wheels and foam...

This is the RC Screwz Traxxas Revo 3.3 (53097-3) Stainless Steel Screw Set. RCScrewZ Stainless Screw Kits are the best way to beef up the hardware throughout your RC vehicle in one convenient package. Your new kit will include everything needed to do a...

This is the E-Flite Vertical Fin (Yellow) without decals for the E-Flite Blade mCX ultra-micro helicopter.

This is the E-Flite Hardware Set for the E-Flite Blade mCX ultra-micro helicopter.

This is the E-Flite Servo Pushrod Set for the E-Flite Blade mCX ultra-micro helicopter.

This is the E-Flite Outer Shaft 3x6x2mm Bearings (2) for the E-Flite Blade mCX ultra-micro helicopter.

This is the E-Flite Outer Shaft Retaining Collar Set for the E-Flite Blade mCX ultra-micro helicopter.

This is the E-Flite Outer Shaft, Main Gear and Bushing Holder Set for the E-Flite Blade mCX ultra-micro helicopter.

This is the E-Flite Blade mCX Glow in the Dark Vertical Fin Tech Notes:Note: Due to the nature of the glow in the dark plastic material, the parts may not be as durable as the standard plastic parts.

This is the E-Flite Blade mCX Glow in the Dark Landing Skid & Battery Mount Set Tech Notes:Note: Due to the nature of the glow in the dark plastic material, the parts may not be as durable as the standard plastic parts.

This is the optional Single Motor Plate for the Traxxas E-Revo TRAC07**. FEATURES:Aluminum construction, blue in colorDesigned for a clean install of a single brushless motor system in the E-Revo RTR (requires gear cover, TRA5677X) INCLUDES:One Aluminum...

This is the Traxxas Jato Low RPM Resonator Tuned Pipe This single-chamber Resonator aluminum tuned pipe is precision-engineered on the dyno to increase the low to mid-RPM power output of TRX Racing Engines. Resonator pipes feature R.O.A.R. legal stingers...

This is the Wheelie Bar Arm for the T-Maxx 3.3. FEATURES:4 snap-in adjustment positions to control degree of wheelie action easily removable if additional control isn't neededConstructed of hardened plastic, black in color INCLUDES:Wheelie Bar Arm with...

This is a package of Progressive Rate Shock Springs from Traxxas for use with the Traxxas Ultra Shocks set only. These may be used on either the front or rear of the T-Maxx 3.3. FEATURES:Steel constructionWhite in colorUnder light duty driving the...

This is a 28-tooth 48-pitch replacement Pinion Gear for the Traxxas Slash 2WD and other vehicles. FEATURES:Metal construction. INCLUDES:One Pinion GearOne Set Screw SPECS:Teeth: 28Pitch: 48

These are 5mm Nylon Locknuts by Traxxas. FEATURES:Blue anodized aluminum construction.Nylon inserts. INCLUDES:Four 5mm locknuts. SPECS:Thickness: 4.95mm (.195")

This is the Stock Replacement Clutch Shoes and Spring for the Nitro Stampede. These shoes are locatedunderneath the clutchbell. FEATURES:Black in color INCLUDES:Two clutch shoesOne wrap around spring REQUIRES:Installation onto vehicle. SPECS:Length of...

These are the Replacement Bulkhead Cross Braces for the Traxxas E-Maxx. These Braces are located in between the bumper mounts. FEATURES:Black nylon construction INCLUDES:Two Bulkhead Cross BracesEight 3x25mm round head screws REQUIRES:Installation onto...

This is the optional 39mm Aluminum Front Turnbuckle Set from Traxxas. FEATURES:Anodized aluminum construction, red in colorBlack nylon ball ends and steel link set INCLUDES:One 39mm red aluminum turnbuckle set with instructions REQUIRES:Installation onto...

These bearings may be used with Traxxas vehicles or on whatever vehicle they will fit. PACKAGE INCLUDES:2-Bearings SPECS:5x8x2.5mm FEATURES:The bearing are constructed of stainless steel Replacement part for4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD...

Traxxas Big Bore shocks provide ultimate damping control. They’re hard-anodized, Teflon®-coated and have large cylinders for greater oil capacity. These shocks also include our super smooth, long wearing titanium nitride (TiN) coated shock shafts...

This is the Micro Servo for the Traxxas Revo Truck, TRAC71**.  This is the servo than connects to the shift linkage. FEATURES:Fits in the Left Electronics Box and controls shifting of the 2-speed transmission INCLUDES:One Micro Servo with Standard...

This is the Spektrum Flight Log.  Spektrum's Flight Log is a unique tool that allows you to view the performance of your radio system like never before.  With the revolutionary Flight Log, you can now quickly and easily view the real-time...

This is the Robinson Racing Xtra Hard 5mm Bore Steel 15-Tooth 1.0 Module Pinion Gear.  This works in brushless setups for the Traxxas Revo 2.5, 3.3, and T-Maxx 3.3, and it also works with most 1/8 scale brushless conversions for Associated,...

This is the Robinson Racing Xtra Hard 5mm Bore Steel 14-Tooth 1.0 Module Pinion Gear.  This works in brushless setups for the Traxxas Revo 2.5, 3.3, and T-Maxx 3.3, and it also works with most 1/8 scale brushless conversions for Associated,...

This is the Replacement Gear for the optional Center Differential Kit (TRA5414) for the Traxxas Revo. FEATURES:Nylon construction INCLUDES:Gear, two ring seals, gasket and instruction sheet REQUIRES:Installing in diff case according to instructions on...

This is the Torque Control Slipper Upgrade Kit for the Traxxas T-Maxx. FEATURES:Metal and plastic construction INCLUDES:One torque control slipper upgrade kit without OptidriveInstallation instructions REQUIRES:Installation on the T-Maxx COMMENTS:This...

This is the replacement Starter Shaft for the T-MAXX 2.5 engine. FEATURES:Steel Construction INCLUDES:One shaft REQUIRES:Traxxas 2.5 T-MAXX engine SPECS:Length: 25.4 mm (1")Diameter: 18.2 mm (0.716") COMMENTS:If the oneway bearing is needed, use...

This is the replacement Recoil String for use with the Traxxas 2.5/2.5R recoil starters. FEATURES:Direct replacementNylon construction INCLUDES:One replacement recoil starter string REQUIRES:Remainder of recoil SPECS:Length:21.5"(546.10mm) COMMENTS:This...

This is the Team Integy Blue Aluminum Ball-Bearing Steering Bell Crank for the Traxxas T-Maxx 2.5, 2.5R, and 3.3 trucks.  This part looks awesome, and it helps keep the steering precise, strong, and operating smoothly...

This is the Team Integy Titanium Front Bumper and Bumper Mount for the Traxxas T-Maxx .15, 2.5, 2.5R, 3.3, E-Maxx, and E-Maxx Brushless trucks.  This is very durable, and it looks great!  These look great on show trucks, but they offer the...

This is a set of eight Integy Silver Aluminum Super Heavy-Duty MSR8 Piggy Back Shocks for the Traxxas T-Maxx and E-Maxx trucks.  These fit the Traxxas T-Maxx .15, 2.5, 2.5R, and 3.3, as well as the E-Maxx trucks.  These include both...

This is a Traxxas Jato 2.5 and 3.3 Primary Shaft and One-Way Bearing.FEATURES:Metal ConstructionInstalls in gearbox behind the primary clutch assemblyINCLUDES:One Metal Primary ShaftOne One Way BearingOne Snap RingOne 5mm x 8mm x .5mm Washer

This is the Clutch Guard for the Traxxas Nitro Jato Stadium Truck. FEATURES:Nylon constructionBlack in color INCLUDES:One Nylon Clutch Guard REQUIRES:Assembly onto vehicle

This is a set of Anti-Roll Bars and Linkages for use with the Traxxas Jato 3.3, TRAC83**. These are mounted onto the front and rear of the vehicle and help make the vehicle more responsive to steering inputs. FEATURES:Optional partSteel sway bar...