This the LaTrax Alias Quadcopter Red Rotor Blade Set. It includes two rotor blades and two screws. Features: Plastic construction Flexible to withstand crashes Includes: Two Rotor BladesTwo 1.6x5mm Button Head Cap Screws

This the LaTrax Alias Quadcopter White Rotor Blade Set. It includes two rotor blades and two screws.Features: Plastic construction Flexible to withstand crashes Includes:Two Rotor BladesTwo 1.6x5mm Button Head Cap Screws

This is the LaTrax Alias Red Replacement Canopy Set for the Alias Quadcopter.Features:Two-piece plastic constructionIncludes: Red Canopy with three ScrewsSpecificationsLength: 3.4" (87.7mm)Width: 1.9" (47.5mm)Height: 0.78" (20mm)

This is the Traxxas Telemetry Expander Mount 6559 for the Spartan Brushless boat. This part makes it possible to mount the #6550 Telemetry Expander Module on the Spartan. The telemetry expander mount secures to the Spartan's battery tray with a...

This is the Traxxas Telemetry Expander Mount 6557 for the Electric Stampede 2WD. This part makes it possible to mount the #6550 Telemetry Expander Module on this vehicle.

This is the Traxxas 150cc Fuel Tank for the Revo 3.3, Slayer, and Slayer Pro TrucksFitsRevo 3.3SlayerSlayer Pro

This is Tamiya PS-9 Green Color RC Body Spray Lacquer Paint for Polycarbonate RC Car, Truck, and Buggy Bodies.Features: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. This paint is impervious to oil and...

These are the Integy Blue Billet Aluminum Machined XLS Piggyback Shocks for Traxxas 1/10 Scale Slash 4x4 trucks. Piggybacks increase the oil volume of the shocks which results in more consistent performance from your suspension. These include two sets...

This is the Garrett Edge Digger with Carrying Sheath for Belt Mount.  It features a strong 7.5" double-edged carbon steel digging blade with cutting edge teeth and a non-slip blade guard with comfortable rubber handle.  The total length is 12".

This is the RCScrewz Traxxas E-Maxx Stainless Steel Screw Set. It can be used with the E-Maxx 16.8V or E-Maxx Brushless truck. The kit contains everything you need to upgrade the hardware on your truck. The shoulder screws used to mount the shocks are...

This is the Integy Silver Billet Aluminum Machined Stage 1 Conversion For Traxxas 1/10 Rustler, Stampede 2WD, and Slash 2WD trucks.  This will fit the XL-5 and VXL 2WD versions of each vehicle.Features:Aluminum...

This is the Integy Red Billet Aluminum Machined Stage 1 Conversion For Traxxas 1/10 Rustler, Stampede 2WD, and Slash 2WD trucks.  This will fit the XL-5 and VXL 2WD versions of each vehicle.Features:Aluminum...

This is the Integy Orange Billet Aluminum Machined Stage 1 Conversion For Traxxas 1/10 Rustler, Stampede 2WD, and Slash 2WD trucks.  This will fit the XL-5 and VXL 2WD versions of each vehicle.Features:Aluminum...

This is the Integy Gun Metal Billet Aluminum Machined Stage 1 Conversion For Traxxas 1/10 Rustler, Stampede 2WD, and Slash 2WD trucks.  This will fit the XL-5 and VXL 2WD versions of each vehicle.Features:Aluminum...

This is the Integy Green Billet Aluminum Machined Stage 1 Conversion For Traxxas 1/10 Rustler, Stampede 2WD, and Slash 2WD trucks.  This will fit the XL-5 and VXL 2WD versions of each vehicle.Features:Aluminum...

This is the Integy Blue Billet Aluminum Machined Stage 1 Conversion For Traxxas 1/10 Rustler, Stampede 2WD, and Slash 2WD trucks.  This will fit the XL-5 and VXL 2WD versions of each vehicle.Features:Aluminum...

These are the Rear Springs for use on the Traxxas Slash 2WD Short Course Racing TruckFeaturesSteel constructionProgressive rate dampingFits the Slash Big Bore shocksIncludesTwo Rear White SpringsSpecificationsLength: 71mm (2.8")Outer Diameter: 16.75mm (0...

These are the 3x15mm Roundhead Screws from Traxxas.FeaturesSteel constructionSilver in color IncludesSix 3x15mm Roundhead Screws SpecificationsLength: 15mm (0.59")Diameter: 3mm (0.12")

These are the Assembled Stub Axles and Yokes for use on the Traxxas 1/16 E-Revo, Slash, and Summit Vehicles.  These fit the brushed and VXL brushless versions.FEATURESSteel constructed axles ...

These are the Wheel Hubs and Axle Pins for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.FEATURESNylon constructionBlack in colorINCLUDESFour Wheel HubsFour 1.5x8mm Axle PinsREQUIRESInstallation on the...

This is a package of DuBro Steel Hex Nuts, 2-56 Features 4 per package Zinc Plated

This is a Traxxas Right Rear Suspension Arm Set for the Traxxas Slayer Pro 4x4. Features: Black plastic construction Includes: Two arms

These are the Traxxas Cross Pins and Drive Pins for use on the Summit 1/10 truck. Features: Steel construction Includes:Four Cross PinsFour Drive PinsFour Set Screws

This is a pair of Traxxas Response Pro 3.8" Short Knobby Design Tires with Foam Inserts.  These are for use with the Traxxas 3.8" wheels. The Response Pro tires are the ultimate in off-road racing performance. A taller profile increases side...

This is the Traxxas Revo 3.3 Adjustable Rear Suspension Arm Set. This allows you to lengthen the wheelbase by 10mm or 19mm depending on conditions and driver preference. OverviewAdds an additional 10mm or 19mm of wheelbase extension to Revo in just...

This is a Robinson Racing 15-Tooth 48 Pitch Pinion Gear. The 48 Pitch Hard Nickel Plated Alloy Steel Pinions are precision cut gears with an extremely hard coating that makes them last and last and last. Pinions are stamped with tooth number. 1/8 inch...

This is the J Concepts Illuzion BAJR Desert Body (Supplied clear/unpainted) for the Traxxas Slash XL-5 and VXL 2WD trucks. Features Concept inspired JConcepts - BAJR desert styling Low profile inspired body, cab and window design Narrow and tucked...

This is the Integy Billet Machined Aluminum Servo Horn with 24-Tooth Spline for Hitec servos. This is great for 1/10 Rock Crawlers.

These are the Traxxas Front and Rear Toe Links for use on the 1/16 E-Revo VXL 4WD. Features: Nylon construction Red in color Includes:Four Front/Rear Toe LinksEight Hollow Balls Specifications:Length: 86mm (3.4")Diameter: 5mm (0.20")

These are the Traxxas Pushrods and Hollow Balls for use on the 1/16 E-Revo VXL 4WD. Features: Molded composite construction Red in color Includes:Four PushrodsEight Hollow Balls Specifications:Length: 70mm (2.8")Diameter: 5mm (0.20")

These are Traxxas Assembled Short Course Tires and Wheels for use on the Traxxas 1/16 Slash VXL 4WD. Features: SCT satin chrome wheels Red beadlock style SCT off-road racing tires Includes:One Left and One Right Assembled SCT Tire and...

This is the Traxxas Front and Rear Bumper for use on the Traxxas 1/16 Slash VXL 4WD. Features: Nylon construction Black in color Includes:One Front BumperOne Rear Bumper

This is the Traxxas Stock Dual Motor Plate for the E-Revo truck. This part holds the motors onto the truck. Features: Aluminum construction Blue anodized Specifications:Width: 3.31" (84mm) (At widest point)Height: 2.91" (74mm)Thickness: 0.13"...

This is the Traxxas Mamba ESC Mounting Plate for the Brushless E-Revo and Brushless E-Maxx. Features: Nylon construction Black in color Includes:One ESC Mounting PlateTwo 3x35mm Cap Head ScrewsFoam Padding Requires: Use with Castle Creations...

This is a pair of Traxxas 2.8" Rear Alias Tires with foam inserts from for use with vehicles such as the Jato. Features: Super soft rubber compund Dual pin design Includes:Two rear Alias tiresTwo foam inserts Requires: 2.8" wheels Specifications:Width:...

This is the Traxxas Transmission Output Shaft for the Revo. Features: Metal construction Black in color Includes: One output shaft, Part #5369 Specifications:Overall length: 3-3/8" (85mm)Diameter: 1/4" (6mm)

This is a package of Traxxas 5mm x 8mm Bearings (8). Includes: Eight 5mm x 8mm Bearings Specifications:Height: 2.5mmInner Diameter: 5mmOuter Diameter: 8mm

These are Traxxas 5mm Nylon Locknuts (8). Features: Chromed steel construction Nylon inserts Includes: Eight 5mm locknuts Specifications:Thickness: 4.95mm (.195")

This is the Traxxas Lower Chassis Brace for the E-Maxx 16.8V and E-Maxx Brushless. Features: Nylon construction Black in color Replaces worn or damaged lower chassis braces Includes: Right and left lower chassis braces Specifications:Length: 9.44"...

These are the Traxxas 59mm Turnbuckle Toe Links for the Traxxas Rustler, Stampede, and Bandit. Features: Metal and Nylon Construction Silver and Black in Color Assembled w/Rod Ends Includes: Two 59mm (78mm center to center) turnbuckles