This is the Traxxas 1/10 Summit ExoCage with Hardware. This includes all parts and hardware to complete one roll cage.Fits1/10 Summit

This is the Traxxas Jato 61mm Red Aluminum Turnbuckle Front Toe Link with Rod Ends and Hollow Balls.FeaturesRed anodized aluminum constructionBlack pre-attached ball linksIncludes: One aluminum link ...

This is the Traxxas Jato 58mm Red Aluminum Turnbuckle Camber Link with Rod Ends and Hollow Balls.FeaturesRed anodized aluminum constructionBlack pre-attached ball linksIncludes: One aluminum linkSpecificationsLength: 3.8" (96mm)Diameter: 0.16"...

This is the Traxxas Jato 2.5 and 3.3 Wheelie Bar/Rear Skid Plate Assembly.FitsJato 2.5Jato 3.3

This is a pair of Traxxas Black Chrome All Star 2.8" Wheels for use on the front of Traxxas 2WD Nitro vehicles such as the Jato, Nitro Rustler, and Nitro Stampede.SpecificationsOverall Diameter: 2.8" (71mm)Width: 1.92" (49mm)Axle Diameter: 7mm (0...

This is a pair of Traxxas Ribbed 2.8" Tires and Twin Spoke Chrome Wheels for use on the front of nitro vehicles like the Jato, Nitro Rustler, Nitro Sport, and Nitro Stampede.FitsJatoNitro RustlerNitro SportNitro StampedeMore detail coming soon! Please...

This is a pair of Traxxas Alias 2.8" Tires Pre-Mounted on Twin Spoke Wheels for use on the rear of Traxxas 2WD nitro trucks such as the Jato, Nitro Rustler, Nitro Sport, and Nitro Stampede.FeaturesChrome twin spoke wheelsAlias 2.8" tires pre-mounted and...

This is a pair of Traxxas Ribbed 2.8" Front Tires and Foam Inserts for use on 2.8" Traxxas-bead wheels.IncludesTwo Shredder front 2.8" tiresTwo foam insertsSpecificationsWidth: 2" (50mm)Inner Diameter: 2.8"(71.12mm)Outer Diameter: 3.6"...

This is the Traxxas Front Sway Bar Linkage Set for 1/10 E-Revo, Revo 3.3, and Slayer Pro trucks.Includes:Two 3x70mm assembled front turnbuckles with rod ends, hollow balls and ball studs Fits1/10 E-Revo Brushed1/10 E-Revo BrushlessRevo 3...

This is a pair of Traxxas Stainless Steel GTR Shock Shafts for use with the Traxxas 5460-series GTR Shocks. The 5460-series GTR shocks are the shocks available for the Jato, Revo 3.3, E-Revo, Summit, Slayer, and XO-1 vehicles.SpecificationsLength: 1.8"...

This is the Traxxas Red Aluminum GTR Shock Set for Jato, Revo, E-Revo, Summit, Slayer, and XO-1 vehicles. Shock oil is included. Springs are sold separately.Features Machined threaded aluminum body with oversized spring collar for ...

This is the Traxxas Front and Rear Center Half Shaft Set for Revo 3.3 and Slayer trucks.FitsRevo 3.3SlayerCheck your vehicle manual to make sure this part fits your specific model.

This is a pair of Traxxas Steel Stub Axles for 1/10 E-Revo, Revo 3.3, E-Maxx, T-Maxx 3.3, and Slayer trucks. These are stock replacement axles.Includes: Two stub axlesFits1/10 E-Revo Brushed1/10 E-Revo BrushlessE-MaxxE-Maxx BrushlessRevo 3.3SlayerSlayer...

This is the Traxxas Revo 3.3 Shift Linkage Set with ball collar, spring, ball cup, servo horn, and linkage wire.FitsRevo 3.3

This is the Traxxas Transmission Shift Fork and Shaft for Revo 3.3 and T-Maxx 3.3 trucks with reverse.FitsRevo 3.3T-Maxx 2.5RT-Maxx 3.3 (with reverse)

This is the Traxxas Revo 3.3 ProGraphix Body with Decals. The graphics are pre-printed requiring only the final paint color application to produce a stunning finished body!FitsRevo 3.3Requires: Final paint color applicationSpecificationsLength: 19-1/2"...

This is the Traxxas Revo 3.3 Idler Gear with Bearing and Gear Support.FeaturesSteel idler gear constructionPlastic idler gear support constructionIdler gear bearing pre-installedIncludesOne idler gearOne idler gear supportOne 5X10mm ball bearing

These are the Traxxas Gemini Black Chrome 3.8" Wheels with 17mm Splined Hex Hubs. These fit tires with a 3.8" Traxxas style bead.Fits these vehicles when using 17mm splined hexes1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitE-MaxxE-Maxx...

This is the Traxxas 3x30mm Steering Linkage and Rod End Set for the Traxxas Slayer ProIncludesTwo 3x30mm steel turnbucklesFour short rod endsFour hollow ballsFitsSlayer Pro

This is the Traxxas 3x50mm Linkage Set and Rod Ends for Revo 3.3, E-Revo, Summit, and Slayer trucksIncludesTwo 3x50mm steel turnbucklesFour short rod endsFour hollow ballsFits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitRevo 3.3SlayerSlayer Pro

This is the Traxxas Left-Side Electronics Box and Cover for the Revo 3.3 and Slayer trucks.Fits:Revo 3.3SlayerSlayer Pro

This is the Traxxas 90-Degree Pressure Fitting for Engine Exhaust Pipe Pressure.FitsNitro 4-TecNitro RustlerNitro SlashT-Maxx 2.5

This is the Traxxas Nitro Slash Air Filter Body and Foam Filter with filter support, cap, air filter base, wire mount, and hardware.Fits:Nitro Slash

This is the Traxxas TRX 2.5 & 3.3 Low-Speed Needle with 2x1mm O-rings (2). This works in Traxxas 2.5 and 3.3 engines.For use with TRX 2.5 & 3.3 engines used in:Nitro 4-TecNitro RustlerNitro SlashJato 2.5 & 3.3Revo 2.5 & 3.3T-Maxx 2.5 & 3.3

This is a set of replacement Traxxas Engine Ball Bearings for the TRX 3.3, 2.5R, and 2.5 Engines. This includes one 7x17x5mm and one 12x21x5mm engine bearing. These engines have been used in many of the Traxxas nitro vehicles.SpecificationsFront...

This is a pair of Traxxas 20x27x4mm Rubber Sealed Ball Bearings (2). These are used on the 1/10 Traxxas Summit.FeaturesSteel ConstructionRubber SealedIncludes: Two Ball BearingsSpecificationsOuter Diameter: 27mm (1.06")Inner Diameter: 20mm (0.79")Width:...

This is a pair of Traxxas SS Split Spoke Chrome 3.8" Wheels with 14mm hexes, for use on T-Maxx, E-Maxx, E-Revo, and Summit trucks with 14mm hex hubs.Features Ten spoke chrome finish plastic construction Spokes are in groups of...

This is package of six Traxxas 2.5x18mm Screw Pins. These are used in vehicles like the 1/10 E-Revo, Revo 3.3, Slayer, and XO-1.Includes: (6) 2.5 X 18mm screw pinsSpecificationsLength (overall): 19mm (3/4")Length (threads): 5mm ...

This is the Traxxas Transmission Input Shaft with 18-Tooth Steel Drive Gear Assembly for the 1/10 E-Revo, E-Maxx, and 1/10 Summit trucks.SpecificationsShaft Diameter: 5mmShaft Length: 3.53" (90mm)Thread Size: 4mm Fits1/10 E-Revo Brushed1/10 E-Revo...

This is a pair of Traxxas Gearbox Halves and Hardware for the E-Maxx, E-Maxx Brushless, and 1/10 Summit trucks.

These are the Traxxas 33-Tooth Output Gears, Drive Dog Carrier, and Output Shaft Spacer for the 1/10 E-Revo, Summit, and E-Maxx trucks.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitE-MaxxE-Maxx Brushless

This is the Traxxas Steel 1st Speed 13-Tooth Idler Gear for the 1/10 E-Revo, Summit, and E-Maxx trucks.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitE-MaxxE-Maxx Brushless

This is the Traxxas Transmission Output Shaft for use with the 1/10 E-Revo, E-Maxx, and Summit trucks.SpecificationsOverall length: 2.75" (70mm)Diameter of drive dog mount: .39" (10mm)Diameter of shaft: .23" (6mm) Fits1/10 E-Revo Brushed1/10 E-Revo...

This is the Traxxas E-Maxx Steering Servo Horn and Steering Link Set. This fits the E-Maxx and E-Maxx Brushless trucks.Includes2x steering servo horns1x 3x12mm threaded rod steering link with rod ends and hollow balls

This is a set of six Traxxas 3x10mm Shoulder Screws with Threadlock.SpecificationsOverall Length: 12mm (.47")Length, bottom of head to end of screw: 10mm (.39")Shoulder Length: 6mm (.24")Shoulder...

This is a set of six Traxxas 3x32mm Cap-Head Hex Machine Screws.FeaturesBlack finishSteel constructionCap head designSpecificationsLength: 1.260" (32mm)Diameter: .119" ( 3mm)MM Pitch: .5 coarse Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10...

This is pack of six Traxxas 3x28mm Cap-Head Hex Machine Screws and Lock Washers.Includes:(6) 3X28mm cap head screws(6) lock washers(6) washers(6) split washersSpecificationsLength: 1-1/8" (28mm)Diameter: 1/8" (3mm) Fits1/10...

This is a package of Traxxas 3x25mm Grub/Set Screws and 3mm Nylon Locknuts. This includes 8 set screws and 8 locknuts.FeaturesBlack metal 3x25mm grub screwsSilver metal 3mm locknuts with nylon insertsIncludesEight 3x25mm Grub ScrewsEight 3mm Locknuts ...

This is the Traxxas Steering Drag Link 4x72mm Turnbuckle with Rod Ends and Hollow Balls for the E-Maxx 16.8V and E-Maxx Brushless trucks.SpecificationsLength: 3.93" (100mm)Shaft diameter: .15" (4mm)

This is a package of six Traxxas 4x16mm Button-Head Hex Machine Screws.Replacement part for these modelsMaxxRevoSlayer Pro 4X4SledgeSummitTRX-4 1972 Chevrolet Blazer High Trail EditionTRX-4 1979 Chevrolet BlazerTRX-4 1979 Ford BroncoTRX-4 Chevrolet K10...