These are the Traxxas GTR Shock Caps, Spring Retainers and Hollow Balls for the Unlimited Desert Racer.Stock Replacement OnUnlimited Desert Racer (UDR)

This is the Traxxas 4-Tec 2.0 Telemetry Expander Mount.Accessory Part For4-Tec 2.0

These are the Traxxas XO-1 Split Spoke Black Chrome Front Wheels (2).Stock Replacement OnXO-1

These are the Traxxas XO-1 Split Spoke Black Chrome Rear Wheels (2).Stock Replacement OnXO-1

These are the Traxxas XO-1 Front S1 Slick Tires Pre-Glued on Black Dished Wheels (2).Accessory Part ForXO-1

These are the Traxxas XO-1 Rear S1 Slick Tires Pre-Glued on Black Dished Wheels (2).Accessory Part ForXO-1

These are the Traxxas White Front Springs (2) for Long Ultra Shocks found on vehicles like the Stampede, Craniac, Skully, Bigfoot, and other trucks based on the Stampede chassis. Replacement Part ForHoss 4X4 VXLStampede 4X4 VXLStampede 4X4Stampede...

This is the Traxxas Green Aluminum Steering Bellcrank Set for Slash 2WD, Rustler, Bandit, and Nitro Slash trucks. If the bellcrank you are replacing has an integrated servo saver, it is recommended that you put a servo saver directly on the servo when...

These are the Traxxas 3x4mm Button-Head Hex Machine Screws (6) used on the Traxxas Unlimited Desert Racer.Stock Replacement OnUnlimited Desert Racer (UDR)

This is the Spektrum DX6 G3 Radio System with AR6600T Integrated Telemetry Receiver. The Spektrum DX6 has been designed from the ground up to deliver way more than you would ever expect from a 6-channel transmitter in its price range.Features ...

This is the Traxxas TRX-4 Rigid LED Lightbar. This lightbar requires use of the #8028 power supply. Outfit your TRX-4 scale crawler truck with this officially-licensed Rigid lightbar for epic realism!

This is the Savox SA-1230SG Monster-Torque Steel-Gear Digital Servo, with torque of 500 oz/in on 6 volts. The Savox SA-1230SG Monster Torque Steel-Gear digital servo is the servo that is ideal for those requiring extra torque, but not using high voltage...

This is the Traxxas 4-Tec 2.0 Blue Aluminum Servo Saver Nuts. This can be used with the servo saver on both the Ford GT and Mustang GT versions, as well as the 4-Tec 2.0 rolling chassis sets.Fits4-Tec 2.0

This is the Traxxas 4-Tec 2.0 Ford GT Black Pre-Painted Body with Decals. This body is even pre-cut, making for quick final installation!Note: Tail lights, exhaust tips, & mounting hardware (Traxxas part #8314) are not includedFits4-Tec 2.0

This is the Traxxas 4-Tec 2.0 Ford GT Clear Body with Decals, Tail Lights, Exhaust Tips, and Mounting Hardware.Fits4-Tec 2.0

This is the Traxxas Aton White High Visibility Decal Set.FitsAtonAton Plus

This is the Traxxas Aton Orange High Visibility Decal Set.FitsAtonAton Plus

This is the Traxxas Aton Blue High Visibility Decal Set.FitsAtonAton Plus

This is the Traxxas Aton Red High Visibility Decal Set.FitsAtonAton Plus

This is a pair of Traxxas X-Maxx Tires Pre-Mounted on Satin Chrome Wheels. The tires are made of the tougher 8S-rated rubber compound. Add some high-impact style to your X-Maxx and XRT with these ready-to-mount wheels and tires. The wheels come...

These are the Traxxas X-Maxx and XRT Green Aluminum GTX Shock Spring Retainers/Adjusters. These come assembled with O-rings.  Green-anodized aluminum upper spring retainers for GTX shocks come equipped with integrated O-rings for precise spring...

These are the Traxxas X-Maxx and XRT Green Aluminum GTX Shock Caps and Spacers. This includes all four shock caps. Set of four green-anodized aluminum shock caps add strength and style to GTX shocks. Shock caps come with pivot balls installed and include...

This is a pair of Traxxas X-Maxx Green Aluminum GTX Shocks. The shocks come fully-assembled and include a bottle of shock oil. Springs are not included.FitsX-Maxx 6SX-Maxx 8S

This is the Traxxas DCB M41 Boat Drive Strut Alignment Tool.Compatible withDCB M41 boats

This is the Traxxas DCB M41 Boat Rudder Pushrod, Servo Horn and Hardware.FitsDCB M41 boats

This is the Traxxas DCB M41 Boat Stuffing Tube Upper and Lower Mount with Hardware. Replacement upper and lower stuffing tube mount with 4x10 stainless screws (2) and 3x10 mm stainless screws (2)FitsDCB M41 boats

This is the Traxxas Blue Aluminum Drive Strut for the DCB M41 boat. Replacement blue-anodized aluminum drive strut with self-lubricating bushingsFitsDCB M41 boats

These are the Traxxas Bandit Pink Rear Springs. These are a direct fit on the stock Ultra Shocks on the Bandit XL-5 and VXL buggies.FitsBandit VXLBandit XL-5

This is the Spektrum Tricera RHCP FPV Race Antenna. The Spektrum TriCera FPV Racing Antenna is designed to provide the Cleanest Video Signal and the maximum coverage your setup allows while providing superior durability. Spektrum RC teamed up with...

This is the Spektrum AR8010T 8-Channel Air Receiver with Integrated Telemetry. The AR8010T receiver is a feature-packed, 8-channel receiver with integrated full-range telemetry. The AR8010T features built-in connection ports for RPM, Flight Pack...

This is the RC Screwz Traxxas X-Maxx 8S (77086) Rubber Shielded Bearing Kit. Protect your off-road monster from dirt, dust, mud and grime with this high-quality rubber shielded bearing kit.Rubber Shielded Bearing Kit Features: High Quality Rubber...

This is the Dynamite Large Scale Gas Engine Safety Kill Switch. This switch allows you to cut the power to your engine from the third channel on your radio. It can also be used to cut power in the case of lost radio signal, low battery, or total...

These are the RPM Rear Suspension A-Arms for ARRMA Kraton, Talion, and Outcast trucks. These also fit Durango DEX8T truggies.This is a direct replacement for ARRMA part AR330249 and Durango part TD330707.RPM Rear A-arms for the ARRMA Kraton, Talion &...

These are the RPM "Flat" Front Suspension A-Arms for Associated B6 and B6D buggies. You can't go fast if your suspension settings don't stay locked in. With stock A-arms, the amount of slop at the hinge-pins can cause your suspension settings to wander...

This is the RPM Mini Front Bumper for Associated B6 and B6D buggies. This bumper is nearly 2" (49mm) wide and extends out 1" (25mm) in front of the chassis for excellent protection. It only weighs 7.5g! This is a direct replacement for the stock...

These are the RPM Traxxas Slash 2WD Blue LCG Nerf Bars for use on Slash 2WD trucks running the low-CG chassis. The chassis layout of the low center of gravity chassis (LCG) Slash 2wd is different than the original high center of gravity chassis (HCG),...

These are the RPM Replacement 0 and 3-Degree Rear Mounts for RPM Gearbox Housings. These are replacement 0-degree and 3-degree rear mounts for RPM #73612, #73614 & #73615 Gearbox Housings for Traxxas 1/10 scale 2wd vehicles. Each package contains 1 -...

This is the RPM Blue LaTrax Alias Landing Gear Set. This includes four landing gear legs, which add 20mm (0.8") of height. These replace the stock 6649 landing gear feet.The LaTrax Alias is a tiny, fun and competent flyer, yet suffers from ground...

These are the Traxxas 4-Tec 2.0 Split Spoke 1.9 Wide Black Chrome Rear Wheels (2). These fit all 4-Tec 2.0 cars, including the Ford GT and Mustang GT.Accessory Part For4-Tec 2.0 VXL Chassis4-Tec 2.0 XL-5 Chassis4-Tec 2.0 Ford GT4-Tec 2.0 Ford Mustang

These are the Traxxas 4-Tec 2.0 Split Spoke 1.9 Black Chrome Front Wheels (2). These will fit 4-Tec 2.0 cars such as the Ford GT and Mustang GT.Accessory Part For4-Tec 2.0 VXL Chassis4-Tec 2.0 XL-5 Chassis4-Tec 2.0 Ford GT4-Tec 2.0 Ford Mustang