This is the Traxxas Differential Gear Set for the #6780 center diff.   Replacement spider gear set for the 6780 center differential and Drag Slash differential. Includes (4) Spider Gears(2) Spider Gear Shafts

These are the Traxxas Hardened Steel Center Differential Output Gears (2) for use in the #6780 metal center diff unit for the Rustler 4x4, Slash 4x4, and Stampede 4x4 trucks.

This is the Traxxas Housing, center differential (aluminum)/ x-ring gaskets (2)/ ring gear gasket (1)/ bushings (4)/ 5x10x0.5 PTW (1)/ 2.5x10 CCS (with threadlock) (4) Replacement aluminum housing for 6780 center differential. Includes ring gear gasket,...

This is the Traxxas Red 6061-T6 Aluminum 189mm Center Driveshaft for Rustler 4x4 trucks. Formed from 6061-T6 aluminum, this 189 mm center driveshaft is both strong and lightweight. Internal splines fit directly onto the input shafts of the front and rear...

This is the Traxxas Green 6061-T6 Aluminum 189mm Center Driveshaft for Rustler 4x4 trucks. Formed from 6061-T6 aluminum, this 189 mm center driveshaft is both strong and lightweight. Internal splines fit directly onto the input shafts of the front and...

This is the Traxxas Red 6061-T6 Aluminum Center Driveshaft for Stampede 4x4 and Telluride trucks. Accessory Part ForStampede 4x4 Brushed XL-5Stampede 4x4 VXLStampede 4x4 XL-5TellurideNote: Trucks must be equipped with splined drive hubs that slide into...

This is the Traxxas Green 6061-T6 Aluminum Center Driveshaft for Stampede 4x4 and Telluride trucks. Accessory Part ForStampede 4x4 Brushed XL-5Stampede 4x4 VXLStampede 4x4 XL-5TellurideNote: Trucks must be equipped with splined drive hubs that slide into...

These are the Traxxas Rustler 4x4 TUBES Blue-Anodized 7075-T6 Aluminum 87mm Front Toe Links. The TUBES are super light, yet stronger than titanium due to their design, making them an awesome upgrade for strength and good looks. An alumium adjustment...

These are the Traxxas Rustler 4x4 TUBES Red-Anodized 7075-T6 Aluminum 87mm Front Toe Links. The TUBES are super light, yet stronger than titanium due to their design, making them an awesome upgrade for strength and good looks. An alumium adjustment...

These are the Traxxas Rustler 4x4 TUBES Green-Anodized 7075-T6 Aluminum 87mm Front Toe Links. The TUBES are super light, yet stronger than titanium due to their design, making them an awesome upgrade for strength and good looks. An alumium adjustment...

This is the Traxxas Rustler 4x4 Blue Roof Body Skid Plate with 3x12mm Capscrews (4) for installation. Accessory Part ForRustler 4x4 Brushed XL-5Rustler 4x4 VXL

This is the Traxxas Rustler 4x4 Orange Roof Body Skid Plate with 3x12mm Capscrews (4) for installation. Accessory Part ForRustler 4x4 Brushed XL-5Rustler 4x4 VXL

This is the Traxxas Rustler 4x4 Red Roof Body Skid Plate with 3x12mm Capscrews (4) for installation. Accessory Part ForRustler 4x4 Brushed XL-5Rustler 4x4 VXL

This is the Traxxas Rustler 4x4 Green Roof Body Skid Plate with 3x12mm Capscrews (4) for installation. Accessory Part ForRustler 4x4 Brushed XL-5Rustler 4x4 VXL

This is the Traxxas Rustler 4x4 White Roof Body Skid Plate with 3x12mm Capscrews (4) for installation. Accessory Part ForRustler 4x4 Brushed XL-5Rustler 4x4 VXL

This is the Traxxas Telemetry Expander Data Link Wire, used to connect the #6550X Telemetry Expander 2.0 to the #6590 high-voltage power amplifier in the Traxxas Unlimited Desert Racer. Accessory Part ForUnlimited Desert Racer (UDR)

These are the Traxxas 20x32x7mm Stainless Steel Black Rubber Sealed Ball Bearings (2 bearings) A step above blue-seal bearings, black-seal bearings offer an even tighter seal for ultimate protection and less maintenance in dirty environments.

These are the Traxxas 17x26x5mm Stainless Steel Black Rubber Sealed Ball Bearings (2 bearings) for use in the TRX-4 Traxx all-terrain tracks. Stock Replacement OnTRX-4 Traxx  

These are the Traxxas 6x16x5mm Black Rubber Sealed Bearings (2) used in the 1/10 Maxx 4S truck. Stock Replacement OnMaxx 4S

This is the Traxxas 54-Tooth 0.8M Steel Spur Gear for use on the #6780 center differential.  The 54-tooth steel spur gear (32-pitch) fits the 6780 center differential. Traxxas spur gears let you fine-tune the performance of your Traxxas model...

This is the Traxxas Bigfoot No. 1 Blue Pre-Painted Body with Decals, and the chrome accessory parts such as the Grille, Engine, and Roll Bar pieces. Whether your stock Bigfoot body is torn up, or you want to dress up an old Stampede with this fantastic...

These are the Traxxas TUBES Green-Anodized 7075-T6 Aluminum 73mm Camber Links.  The TUBES are super light, yet stronger than titanium due to their design, making them an awesome upgrade for strength and good looks.  An alumium adjustment wrench...

These are the Traxxas TUBES Green-Anodized 7075-T6 Aluminum 83mm Camber Links.  The TUBES are super light, yet stronger than titanium due to their design, making them an awesome upgrade for strength and good looks.  An alumium adjustment wrench...

This is the Traxxas Velineon 3500 VXL Brushless Motor Endbell Cover.  This is the standard replacement for the 1/10 VXL brushless motor.  If your original is lost or damaged, replace it to help protect the motor and wiring from damage. Stock...

This is the Traxxas Metal Gear Set for 2085 & 2085X Servos found in the Traxxas X-Maxx trucks. These are stock replacement gears in the 2085X, but can also be used to upgrade a standard 2085 servo to metal gears. Accessory part for these...

This is a set of Traxxas Red Aluminum 4mm Flanged Serrated Nuts (4).  These are used as wheel nuts and lock nuts on many Traxxas models. Accessory part forDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.01/16 E-Revo VXL1/16 E-Revo1/16...

This is the RPM Body Saver Set for Traxxas Rustler 4x4 trucks.  These are compatible with the stock bodies on both the Rustler 4x4 Brushed and Rustler 4x4 VXL Brushless trucks, as well as all Traxxas 6717 and 6718-series bodies RPM engineers...

This is the JConcepts Startec Street Eliminator Front and Rear Drag Racing Wheel Set for Traxxas 2WD Slash and Bandit vehicles.  The front wheels are a 2.2" buggy wheel, and the rear are 2.2x3.0" short course style wheels.  These feature 12mm...

These are the GPM Racing Black Aluminum Lower Suspension Arms (front or rear) for Traxxas X-Maxx trucks. Each pack includes one pair of arms, which can be used on the front or rear of the truck. Made of 6061-T6 aluminum with an anodized finish, these are...

This is the GPM Racing Mock Chevy LS3 V8 Engine with Cooling Fan with Silver Heads for use in the Traxxas TRX-4.  With a built-in temperature sensor, the high-speed fan turns on as the motor heats up, and shuts off if it is running cooler.  Use...

This is the GPM Racing Mock Chevy LS3 V8 Engine with Cooling Fan with Red Heads for use in the Traxxas TRX-4.  With a built-in temperature sensor, the high-speed fan turns on as the motor heats up, and shuts off if it is running cooler.  Use...

This is the GPM Racing Black Air Intake for use with the GPM V8 6.2L LS3 Mock Engine with the Traxxas TRX-4. It includes stainless steel clamps for ultra-realistic looks! The item is supplied black, but can be painted to suit your build. The second...

This is the GPM Racing Black Dual Air Intake for use with the GPM V8 6.2L LS3 Mock Engine for the Traxxas TRX-4. It includes stainless steel clamps for ultra-realistic looks! The item is supplied black, but can be painted to suit your build.  The...

This is the Gen3 RC Complete 19-Piece Rubber Sealed Ball Bearing Kit for Traxxas 4-Tec 2.0 XL-5 & VXL vehicles.  These can be used on the 4-Tec 2.0 Mustang, Ford GT, and the XL-5 and VXL chassis sets.Features Super durable black rubber seals...

This is the Gen3 RC Complete 40-Piece Rubber Sealed Ball Bearing Kit for Traxxas TRX-4 Crawlers. This fits all TRX-4 models.After a bunch of mud, water, and grime finds its way into your off-roader's bearings, these are a must to restore the performance...

These are the GPM Racing Green Aluminum Rear Stub Axle Carriers for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, and Bandit vehicles.This is a direct replacement for Traxxas part 3752 hub carriers.Accessory Part ForTraxxas 1/10 Monster Jam...

These are the GPM Racing Black Aluminum Rear Stub Axle Carriers for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, and Bandit vehicles.This is a direct replacement for Traxxas part 3752 hub carriers.Accessory Part ForTraxxas 1/10 Monster Jam...

These are the GPM Racing Red Aluminum Front Suspension Arms for Traxxas electric Slash 2WD, Stampede 2WD, Rustler 2WD, and Nitro Slash trucks. Made of 6061-T6 aluminum and finished with anodizing, these look awesome and help beef up your truck. Hinge...

These are the GPM Racing Black Aluminum Front Suspension Arms for Traxxas electric Slash 2WD, Stampede 2WD, Rustler 2WD, and Nitro Slash trucks. Made of 6061-T6 aluminum and finished with anodizing, these look awesome and help beef up your truck. Hinge...

These are the GPM Racing Blue Aluminum Front Suspension Arms for Traxxas electric Slash 2WD, Stampede 2WD, Rustler 2WD, and Nitro Slash trucks. Made of 6061-T6 aluminum and finished with anodizing, these look awesome and help beef up your truck. Hinge...