These are the Traxxas 4-Tec 2.0 Green Stripe 4.075 Rate Shock Springs (2). These can be used on all 4-Tec 2.0 vehicles, including the Ford GT and Mustang GT.Accessory Part For4-Tec 2.0 VXL Chassis4-Tec 2.0 XL-5 Chassis4-Tec 2.0 Ford GT4-Tec 2.0 Ford...

These are the Traxxas 4-Tec 2.0 Front and Rear Suspension Arm Mounts and Hinge Pin Retainers. These are used on both the Ford GT and Mustang GT versions.Fits4-Tec 2.0

This is the Traxxas TRX-4 Scale Crawler Transmission or Differential Output Drive Cup, Ball, Pin, Retainer, and Hardware.IncludesPin RetainerDrive CupDrive BallDrive Pin3x11 Screw PinBlack Cross Pin3x6 Buttonhead Cap Screw w/ThreadlockAccessory Part...

This is the Traxxas TRX-4 Crawler GTS Shock Rebuild Kit with x-rings, o-rings, pistons, bushings, e clips, and rod ends. This includes enough parts to rebuild two shocks.FitsTRX-4

This is the Traxxas TRX-4 Crawler Steering Servo Horn.FitsTRX-4

This is the Traxxas TRX-4 Scale Crawler Sealed Receiver Box with Cover, Hardware, and Silicone Grease.IncludesReceiver BoxWire coverFoam padsSilicone grease3x8 Buttonhead capscrews (5)2.5x8 Capscrews (2)FitsTRX-4

These are the Traxxas TRX-4 Crawler Front and Rear Inner Fender Braces.FitsTRX-4

This is the Traxxas TRX-4 Land Rover Defender Grill, Headlight Housings, Lens, Mount Set for use with the #8011 series bodies. FitsTRX-4 #8011 bodiesIncludesGrillGrill Mounts (3)Headlight housings (2)Lens (2)Headlight mount (2)

This is the Hot Racing Dirt Guard Chassis cover for Traxxas Slash 2WD Low-CG Chassis trucks. The chassis cover attaches to the chassis with easy-to-apply hook and loop tape; has zipper chassis access; and uses a breathable Nylon mesh to repel water and...

This is the Hot Racing Lightweight Hardened Steel 72-Tooth 48-Pitch Spur Gear for Traxxas Slash 2WD, Stampede 2WD, Rustler, Bandit, and Telluride vehicles. This will fit XL-5 brushed and VXL brushless trucks. A larger pinion gear will be required on...

These are the Hot Racing Rear Progressive Rally Spec Springs (3 Pairs) for Traxxas Slash 2WD, Slash 4x4, Stampede 2WD, Stampede 4x4, Telluride, and Rustler XL-5 and VXL trucks. These fit the stock Traxxas Ultra Shocks used on these vehicles...

This is the Traxxas 14-Tooth Pinion Gear with 1.0 Mod Pitch and a 5mm Shaft Bore. 14-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model...

This is set of four Traxxas X-Maxx and XRT GTX Shock Red Aluminum Spring Adjusters. These are threaded and mount on the shock body to allow adjustment of the spring pressure.Red-anodized aluminum upper spring retainers for GTX shocks come equipped with...

This is the Spektrum DX6e 6-Channel Transmitter Only. The DX6e gives you more than you ever thought possible from an entry level 6-channel radio. Four model types, 250-model memory, wireless trainer link - you get it all and more. You can even share...

This is the RC4WD 1/10 Scale KC HiLiTES High Performance 150mm / 6" LED Light Bar. These have been Officially Licensed by the KC HiLiTES Company. This will make any scale project look better and add much needed lighting. Detail like no other lights out...

This is a pair of RC4WD Superlift Superide 100mm Scale Shock Absorbers. This is the all new licensed scale shock to hit the market. Licensed from Superlift Suspension Systems. These new shocks feature a complete new design from the ground up and are...

This is the Traxxas Aton Front Left & Right LED Lens (Orange). This is Traxxas part number 7953Part Number: 7953 / TRA7953FitsAtonAton PlusMore detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or contact us if you have...

This is the Traxxas X-Maxx Replacement Chassis.FeaturesOne-piece molded composite plastic constructionSeparate molded compartments for ESC, batteries and moreIncludes: Chassis for the Traxxas X-Maxx

This is the Traxxas Oil-Filled Shocks (Assembled with Springs) (2) Pair of replacement oil-filled shocks for LaTrax Teton or Prerunner Replacement Part For1/18 LaTrax Desert Prerunner1/18 LaTrax Teton

This is the Traxxas Center Driveshaft (One-Way) Add the aluminum one-way driveshaft to help lock up the rear end for better drift controlFitsLaTrax RallyLaTrax Teton

This is the Traxxas Skidplate, front. This is Traxxas part number 7437Part Number: 7437 / TRA7437Fits1/10 RallySlash 4x4 PlatinumSlash 4x4 UltimateMore detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or contact us if you...

This is the Traxxas Bumper, front (1)/ rear (1)/ bumper mount, rear (1). 1/16 scale Summit front and rear bumpers Replacement Part for1/16 Summit

This is the Traxxas Wheel hubs, hex, aluminum (4) (blue-anodized). This is Traxxas part number 7154XPart Number: 7154X / TRA7154XFits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave Digger1/16 Kyle Busch...

This is the Traxxas Spring, shock (GTR) (2.06 rate, tan) (1 pair). This is Traxxas part number 7147Part Number: 7147 / TRA7147Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Grave Digger1/16 SummitMore detail coming soon! Please check your vehicle...

This is the Traxxas Rod ends (8)/ hollow balls (8) Set of eight rod ends with hollow balls Accessory Part For1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Slash 4X41/16 SummitTRX-4M 1/18 1979 Chevrolet K10 High Trail EditionTRX-4M 1/18 1979 Ford F-150...

This is the Traxxas Linkage, front sway bar (2) (assembled with rod ends, hollow balls and ball studs). This is Traxxas part number 6895Part Number: 6895 / TRA6895Fits1/10 RallySlash 4x4 (low-CG)Slash 4x4 (standard chassis)Slash 4x4 PlatinumSlash 4x4...

This is the Traxxas Tires, Kumho, ultra-soft (S1 off-road racing compound) (dual profile 4.3x1.7- 2.2/3.0') (2)/ foam inserts (2).Replica Kumho tires are molded in ultra-soft S1 compound rubber for ultimate road-racing grip. The 4.3″ x 1.7″...

This is the Traxxas 12mm Hex, (Blue-Anodized) 6061-T6 Aluminum Wheel Adaptors with (4) 3x10 Screw Pins and 0.25 inch Drill Bit (For 6mm Shafts) 12 mm blue-anodized aluminum hex adapters feature a 6 mm inner diameter to accept the beefier axles found in...

This is the Traxxas LED lens, red (4).  These are the replacement lens for the Alias.FitsAlias

This is the Traxxas Motor, clockwise (high output, red connector) (1). One clockwise replacement Alias motor Replacement Part ForLaTrax Alias Quad Rotor Helicopter

This is the Traxxas Main shaft, 7075-T6 aluminum, blue-anodized (4)/ 1.6x5mm BCS (4). This is Traxxas part number 6633XPart Number: 6633X / TRA6633XFitsAliasMore detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or contact...

This is the Traxxas Canopy, Alias, orange/ 1.6x5mm BCS (self-tapping) (3). This is Traxxas part number 6613Part Number: 6613 / TRA6613FitsAliasMore detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or contact us if you...

This is the Traxxas Axle carriers, rear, 6061-T6 aluminum, left & right (blue-anodized). This is Traxxas part number 6455Part Number: 6455 / TRA6455FitsXO-1More detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or contact...

This is the Traxxas BFGoodrich Mud-Terrain Tires on SCT Chrome Red Beadlock Wheels for 2WD Front. Pair of BFGoodrich Mud-Terrain T/A KM2 tires come pre-glued and mounted with foam inserts to chrome SCT wheels with red beadlock-style trim. Fits: 12 mm...

This is the Traxxas Tire & wheel assy, glued (SCT black, orange beadlock wheels, SCT off-road racing tires, foam inserts) (2) (2WD front). This is Traxxas part number 5864Part Number: 5864 / TRA5864FitsNitro SlashSlash 2WDSlash 2WD Ford RaptorSlash 2WD...

This is the Traxxas Nerf bars, low CG (grey). Change up the color on your low-CG-equipped 2WD Slash with these black nerf bars. Does not fit standard chassis. Accessory Part ForDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0Ford F-150...

This is the Traxxas Nerf bars, low CG (blue). Change up the color on your low-CG-equipped 2WD Slash with these black nerf bars. Does not fit standard chassis. Accessory Part ForDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0Ford F-150...

This is the Traxxas Nerf bars, low CG (black). Change up the color on your low-CG-equipped 2WD Slash with these black nerf bars. Does not fit standard chassis. Accessory Part ForDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0Ford F-150...

This is the Traxxas Stainless Steel Left and Right Turn Fin Set with Hardware for the Spartan and DCB M41 Boats. Replacement left and right turn fins with (4) 4x12 mm stainless mounting screwsReplacement Part ForSpartan SRSpartan

This is the Traxxas Hatch Post, Water Outlet, Foam Pads and Hardware for the Spartan and DCB M41 boats. Hatch post with hull water outlet, foam pads (10), washer, 4x8 mm stainless screw and 3x4 mm stainless screwIncludesHatch postHull water outlet4x8mm...