This is the Spektrum Avian 80-Amp Brushless Smart ESC with IC5 Plugs for use with 3S-8S LiPo power. The Spektrum Avian 80A Smart ESC for aircraft delivers power and intelligence all-in-one. Without additional sensors or modules, it feeds battery and ESC...

This is the Spektrum AR6610T 6-Channel DSMX Telemetry Receiver. The AR6610T 6-Channel receiver is loaded with the next generation of Spektrum Technology, featuring SRXL2 expandability, Smart ESC Support, and full range telemetry. A built in Barometer for...

This is the E-Flite 40-Amp Brushless ESC with factory-installed EC3 Connector. This ESC is compatible with many E-Flite airplanes, including:PT-17 1.1mPitts S-1S 850mmMaule M-7 1.5mP-51D Mustang 1.2mT-28 Trojan 1.2mP-47 Razorback 1.2mF4U-4 Corsair 1...

This is the Dynamite .28 Big Block Nitro Engine with Pull Start. Specifications Carb Type: 2-Needle Crankshaft Threads: 1/4x28 Crankshaft Type: SG Cylinders: Single Displacement: .28 Muffler Type: Rear Exhaust Plug Type: Standard Recommended Fuel: 20-30%...

These are the Traxxas Maxx GT-Maxx 1.210 Rate Shock Springs with Natural Finish.  Each pack includes 2 springs. GT-Maxx shock springs are offered in different rates to tune your Maxx's suspension performance or compensate for lighter or heavier...

These are the Traxxas Maxx GT-Maxx Red Aluminum Shock Caps.  This is a full set of four. This set of four aluminum shock caps is great way to boost the durability and style of any Traxxas vehicle equipped with GT Maxx Shocks. The machined caps fit...

This is the Traxxas Unlimited Desert Racer Fully-Assembled Rear Differential with Bearings.  When it comes to replacing the rear diff in a UDR, it doesn't get any easier than this. Accessory Part ForUnlimited Desert Racer (UDR)

These are the GPM Racing Blue Aluminum Rear Stub Axle Carriers for Traxxas electric Slash 2WD, Rustler 2WD, Stampede 2WD, and Bandit vehicles. These are made of 6061-T6 aluminum and anodized to finish them off. They are durable and look great!These are...

These are the GPM Racing Red Aluminum Steering Blocks for Traxxas electric Slash 2WD, Rustler 2WD, Stampede 2WD, Bandit, and Nitro Slash vehicles. Made from 6061-T6 aluminum and anodized with a color finish, these are durable and look great.These are...

This is the Traxxas Body bumper, foam. This is Traxxas part number 7436Part Number: 7436 / TRA7436Fits1/10 RallyMore detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or contact us if you have any questions.

This is the GPM Racing Blue Aluminum Rear Skid Plate for the Traxxas 1/10 E-Revo 2.0 VXL Brushless trucks. Made of 6061-T6 aluminum and finished in anodized coloring, these are super durable and help make your truck stand out! Stainless steel...

This is the GPM Racing Gunmetal Aluminum Steering Servo Mount for Traxxas Unlimited Desert Racer trucks. Made of 6061-T6 aluminum, these provide a rigid mount to eliminate flex in the servo mount. It looks great too! Stainless steel mounting hardware...

This is a pair of GPM Racing Gunmetal Aluminum Front Axle Carriers for the Traxxas Unlimted Desert Racer trucks. Made of 6061-T6 aluminum and with an anodized finish, these look fantastic and beef up the front end of the truck. Mounting hardware is...

This is the GPM Racing Gunmetal Aluminum Heatsink Motor Mount for Traxxas Unlimited Desert Racer trucks. Made of 6061-T6 aluminum, this heavy duty design helps pull heat from the motor to improve motor life. These are anodized for a fantastic finish to...

This is the GPM Racing Gunmetal Aluminum Rear Skid Plate for Traxxas X-Maxx trucks. These are made of 6061-T6 for durability and protection, then anodized for a great looking finish. These are perfect for bashers and show trucks alike. Stainless steel...

This is the GPM Racing Gunmetal Aluminum Rear Tie Bar Mount for Traxxas X-Maxx trucks. These are made of 6061-T6 aluminum for durability and anodized for a great finish. Whether your truck is for bashing or show, these are a nice addition!This is an...

This is the GPM Racing Gunmetal Aluminum Front Tie Bar Mount for Traxxas X-Maxx trucks. These are made of 6061-T6 aluminum for durability and anodized for a great finish. Whether your truck is for bashing or show, these are a nice addition!This is an...

This is the GPM Racing Gunmetal Aluminum Steering Rack Center Draglink Brace for Traxxas X-Maxx trucks. Made of 6061-T6 aluminum with an anodized finish, these are super durable, reduce flex, and look awesome!This is an upgrade for the stock draglink in...

This is the GPM Racing Red Aluminum Steering Bellcrank Assembly and Servo Saver for Traxxas X-Maxx trucks. Made of 6061-T6 aluminum with an anodized finish, these are rock solid and look fantastic installed. This set is supported by ball bearings for...

This is the GPM Racing Orange Aluminum Steering Servo Arm Horn for 25T Spline Servos on the Traxxas X-Maxx trucks. These fit the Traxxas 2085 and 2085X servos only.This is an upgrade for the stock Traxxas servo arm in part 7747.Accessory Part ForTraxxas...

These are the GPM Racing Green Aluminum Chassis Nerf Bars for Traxxas X-Maxx trucks. Made of 6061-T6 aluminum with an anodized finish, these are super durable and look awesome installed. Stainless steel mounting hardware is included.These fit in place of...

This is the GPM Racing Red Aluminum Front or Rear Body Post Mount for Traxxas TRX-4 scale trail trucks and rock crawlers. Made of 6061-T6 aluminum, these are durable and look great with their anodized finish.This fits in place of the mount in stock...

This is the GPM Racing Gunmetal Aluminum Front Body Mount Post Set for Traxxas TRX-4 scale trail trucks and rock crawlers. Made of 6061-T6 aluminum, these are durable and look great with their anodized finish.This fits in place of the front mount in...

This is the GPM Racing Orange Aluminum Servo Mount for the 2-Speed servo on Traxxas TRX-4 scale trail trucks and rock crawlers. Made of 6061-T6 aluminum with an anodized finish, these are sturdy and look great installed. Stainless steel hardware is...

This is the GPM Racing Green Aluminum Servo Mount for Diff Lock Servos on Traxxas TRX-4 scale trail trucks and rock crawlers. Made of 6061-T6 aluminum with an anodized finish, these are sturdy and look great installed. Stainless steel hardware is...

These are the GPM Racing Gunmetal Aluminum Adjustable Front and Rear Shock Mounts for Traxxas TRX-4 scale trail trucks and rock crawlers. Made of 6061-T6 aluminum with an anodized finish, these are durable and look great. These will lift the chassis...

This is the GPM Racing Orange Aluminum Heatsink Motor Mount for Traxxas TRX-4 scale trucks and rock crawlers. Made of 6061-T6 aluminum with machined heatsink fins, this motor mount helps pull heat from the motor and dissipate it much better than the...

This is the GPM Racing Black Aluminum Rear Portal Drive Axle Mount Set for Traxxas TRX-4 scale crawlers and trail trucks. Made of 6061-T6 aluminum, these are durable and look great. They make a nice addition to any TRX-4 scale rig or crawler.These are...

This is the GPM Racing Black Stainless Steel and Aluminum Rear CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Slash 2WD, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These feature stainless steel axles and CVD joints,...

These are the GPM Racing Red Aluminum Front Shocks for Traxxas 1/10 Slash 4x4, Rustler 4x4, and Stampede 4x4 trucks. Made of 6061-T6 aluminum and with a monster 4mm shock shaft, these shocks are built to last. They include three full spring sets (1...

This is the GPM Racing Gunmetal Aluminum Adjustable 25T Spline Locking Servo Horn for Traxxas 1/10 Slash 4x4, Stampede 4x4, Rustler 4x4, and 1/10 Rally vehicles. Made of 6061-T6 aluminum, these are strong and look great!Installation notes: The included...

These are the GPM Racing Red Aluminum Rear Stub Axle Carriers for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, 1/10 Rally, Telluride, and others (see below). Made of 6061-T6 aluminum and anodized for a spectacular finish, these are a great way to...

These are the GPM Gunmetal Aluminum Front Steering Blocks for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, Rally, and Telluride vehicles. These are made of 6061-T6 aluminum and anodized for a beautiful finish.These are an upgraded replacement for...

These are the GPM Racing Black Aluminum Front Steering Blocks for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, Rally, and Telluride vehicles. These are made of 6061-T6 aluminum and anodized for a beautiful finish.These are an upgraded replacement...

This is the GPM Racing Black Aluminum Motor Heatsink Fan for Traxxas Slash 4x4 VXL trucks with the low-CG chassis, Stampede 4x4 VXL, and Rustler 4x4 VXL trucks. These are a great addition to help keep your motor cool when pushing hard.Accessory Part...

This is the GPM Racing Orange Aluminum Rear Shock Tower for Traxxas Rustler 4x4 trucks. Made of 6061-T6 aluminum, these are super durable and look fantastic. Stainless steel mounting hardware is included.This set is an upgrade for Traxxas part 6738...

This is the GPM Racing Orange Aluminum Front Shock Tower for Traxxas Rustler 4x4 trucks. Made of 6061-T6 aluminum, these are super durable and look fantastic. Stainless steel mounting hardware is included.This set is an upgrade for Traxxas part 6739...

This is the GPM Racing Black Rear Suspension Mount Bulkhead Tie Bar for Traxxas Rustler 4x4 trucks. This single piece design is made of 6061-T6 aluminum and includes stainless steel mounting hardware.This upgrade replaces Traxxas part 6823 tie bars and...

This is the GPM Racing Orange Complete Aluminum Suspension Arm Set for the Traxxas 1/10 E-Revo 2.0 VXL Brushless trucks. Made of 6061-T6 aluminum, this arm set is incredibly tough. A full set of suspension hinge pins and mounting hardware is included...

This is the GPM Racing Black Complete Aluminum Suspension Arm Set for the Traxxas 1/10 E-Revo 2.0 VXL Brushless trucks. Made of 6061-T6 aluminum, this arm set is incredibly tough. A full set of suspension hinge pins and mounting hardware is included...