This is the Traxxas Body Ultra Shock (Long) (Grey) (2) Long Ultra Shock composite bodies (2) Replacement Part ForBandit VXLBanditDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0Ford F-150 RaptorFord F-150 Raptor R 4X4Ford Fiesta ST...

This is the Traxxas Aluminum Shock Caps (2) (Big Bore Shocks) Replacement aluminum shock caps for Traxxas Big Bore shocks. (2) Caps do not fit Ultra Shocks. Accessory Part ForDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0Ford F-150...

This is the Traxxas Big Bore Shock Cylinder (Long) (1) Replacement long aluminum shock cylinder for Traxxas Big Bore Shocks. Accessory Part ForBandit VXLBanditBIGFOOT No. 1 Officially Licensed ReplicaDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford...

This is the Traxxas Spinning Carousel Rack Organize your shock oil in this spinning carousel rack. The carousel rides on bearings for smooth spinning action.

This is the Traxxas Expander Box Seal Kit Refresh your Telemetry Expander Module with this seal kit. Includes o-ring, seals, and silicone grease

This is the Traxxas Aluminum (Middle) (Red-Anodized) Servo Case - For 2255 Servo Replacement red aluminum middle case for 2255 servos. Accessory Part ForRustler 4X4Bandit VXLBanditDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0E-Revo VXL...

This is the Traxxas Aluminum (Middle) (Blue-Anodized) Servo Case - For 2250 Servo Replacement blue aluminum middle case for 2250 servos. Accessory Part ForRustler 4X4Bandit VXLBanditDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0E-Revo VXL...

This is the Traxxas LED Lights (High-Voltage) Extension Harness Replacement harness extension for the #7885 X-Maxx / XRT LED light kit. Accessory part for these modelsX-MaxxXRT

This is the Traxxas Front and Rear Driveshaft Bushings Front and rear driveshaft bushings Replacement Part ForXRT

This is the Traxxas Medium GTX (Natural Finish) Shock Springs (4.101 rate pink stripe) (2) Medium-length GTX shock springs are offered in different rates to tune your XRT suspension performance or compensate for lighter or heavier vehicle configurations...

This is the Traxxas Medium GTX (Natural Finish) Shock Springs (2.599 rate white stripe) (2) Medium-length GTX shock springs are offered in different rates to tune your XRT suspension performance or compensate for lighter or heavier vehicle configurations...

This is the GPM Silver Aluminum 7075 Center Drive Shaft Upgrade with this aluminum 7075 center drive shaft for more durability IncludesCenter drive shaft - 1pc Replaces Stock Part: #7755 Accessory Part ForMaxxX-MaxxXRT

This is the Traxxas UDR Heavy Duty Pro-Built Fully-Assembled Rear Differential with Aluminum Carrier Upgrade your Unlimited Desert Racer with the heavy-duty Pro-Built rear differential with aluminum carrier. The aluminum housing adds extra strength and...

This is the Traxxas RC Car/Truck Carrier Backpack Features Thick, Weather-Resistant Nylon Fabric Heavy Duty Zippers and Stitching Large Zippered Front Pockets for Tools and Parts Four-Compartment Battery Organizers Thick Padded Sidewalls Large Side...

This is the Traxxas Medium RC Car/Truck Duffle Bag Features Perfect for 1/10 and 1/8 Scale Models Thick, Weather-Resistant Nylon Fabric Heavy Duty Zippers and Stitching Large Outer Pockets for Tools, Parts, and Chargers Reinforced Carry Handles Padded...

This is the Traxxas Shoulder Strap for the #9917 Duffle Bag Add additional carrying support with the strap for your RC Car/Truck Duffle Bag Features Heavy Duty Shoulder Strap for Fuffel Bag with Metal Latches Padded Sleeve For Added Comfort Adjustable...

This is the RC Screwz Traxxas TRX-4M Bronco (97074-1) Stainless Steel Screw Kit. RCScrewZ Stainless Screw Kits are the best way to beef up the hardware throughout your RC vehicle in one convenient package. Your new kit will include everything needed to...

This is the RC Screwz Traxxas TRX-4M Defender (97054-1) Stainless Steel Screw Kit. RCScrewZ Stainless Screw Kits are the best way to beef up the hardware throughout your RC vehicle in one convenient package. Your new kit will include everything needed to...

This is the Traxxas (1979) Chevrolet K10 Truck Decal Sheet Decal sheets for the 1979 TRX-4 Chevrolet K10 body Accessory Part ForTRX-4

This is the Traxxas 2.2″ Classic Chrome 8-Hole Mag Wheels with Center Caps Pair of 2.2″ chrome 8-hole mag wheels with center caps. Front or Rear Requires: 8255A Extended Thread Stub Axle Accessory Part ForTRX-4TRX-6

This is the GPM Acrylic Transparent Black Sunshade Rain Shield IncludesSunshade Rain Shield - (1pc)3M Adhesive Tape - (1pc) Works with 1/18 Scale RC Cars/Trucks Use 3M glue to fix it in place along the car, no need to open holes, directly fix with...

This is the GPM Universal Roof Decoration Antenna FeaturesThe antenna is made of black nylon ductile material, equipped with screws. IncludesRoof Decoration Antenna - (1pc)Self-tapping Screw M1.4x4 - (2pcs)3M Adhesive Tape - (1pc) Note: Mounting screws...

This is the Traxxas Official Team Traxxas Racing Decal Set (Flag Logo/ 6-color) The official Team Traxxas Racing Decal sheet has been revised and now includes EZ-Start, Stinger Motors, ProGraphix, TRX engines and www.Traxxas.com logos. Perfect for adding...

This is the Traxxas Display Stand (155mm wheelbase) Put your TRX-4M on full display with this custom stand. The rigid foam stand holds your truck securely and prevents flat-spotted tires. Fits: 155 mm wheelbase Accessory part for these modelsTRX-4M 1/18...

This is the Traxxas LED lights (Front) Wire Harness Replacement front LED light harness includes zip ties (2) Replacement Part ForTRX-4M 1/18 Ford BroncoTRX-4M 1/18 Land Rover Defender

This is the Traxxas TRX-4m Rubber Battery Strap Rubber TRX-4m battery strap Replacement Part ForTRX-4M 1/18 Ford BroncoTRX-4M 1/18 Land Rover Defender

Traxxas Set of Six O-rings for Sledge Rear Driveshafts Set of six O-rings for use with Sledge rear driveshafts Replacement Part ForSledge

This is the Traxxas Hardened Steel Inner Suspension Pins (Front or Rear) (2) Two 4x67 mm hardened steel inner suspension pins fit front or rear Replacement Part ForSledge

This is the Hobbywing Ezrun MAX5 G2 ESC Sensored Brushless ESC: 6S-12S Features The ESC uses a special process, coupled with an innovative waterproof design, to increase waterproofing and dust-proofing performance in different climates. It is easy to...

This is the Traxxas Screw Set for Sledgehammer Assorted screw set for Traxxas Sledgehammer. Includes machine and self-tapping screws. (no nuts)

This is the Racers Edge Multifunction Aluminum Alloy Shock Plier  

This is the Spektrum IC3 Battery to JST-RCY Device Battery Adapter This adapter adapts a battery with a JST connector to a device with an IC3 connector This adapter adapts a battery with an IC3 connector to a device with an JST-RCY...

This is the Spektrum 3S 11.1V 300mAh 30C LiPo Battery with JST Connector SpecificationsApplication: UMX 3S airplanesProduct Weight: 24.5gMaximum Continuous Discharge Current: 9 AmpsBattery Voltage: 11.1VProduct Width: 0.74" (19 mm) Includes(1) Spektrum...

This is the Spektrum Battery Adapter: JST Battery to JST PH2.0 3P Device This adapter adapts a battery with an JST-RCY connector to a device with a JST-PH connector Adapts PH/UMX connector 2S 7.4v LiPo batteries to common “Red JST” JST-RCY...

This is the Pro-Line 1/24 Trencher Front/Rear 1.0" Mounted 7mm Black Impulse Tires (4) FeaturesMini Version of the Popular Trencher Crawler TiresHighly Detailed Sidewall for Great Side-Hilling2.25" Tall for an Oversized LookMini Version of the Popular...

This is the TEKNO M6 Driveshaft - Joint & Pin Axles, joints and pins for the Tekno RC M6 Driveshafts. CNC machined from steel, then hardened for durability. These will work for the front or rear end of your Slash 4×4. These must be used in...

This is the TEKNO 6mm Stub Axles for M6 Driveshafts (Front/Rear) Stub axles for the Tekno RC M6 Driveshafts. CNC machined from steel, then hardened for durability. These will work for the front or rear end of your Slash 4×4. These must be used in...

This is the Common Sense LED Light Bar Set in Black for 1/10 scale trucks. Give your rig a scale look with our LED Light Bar. This versatile setup works with 4V to 12V DC input and includes all the mounting hardware need for most 1/10 scale trucks...

This is the Traxxas Outdrive Housing with Propeller shaft and Oilite Bushings. Boat outdrive with propeller shaft and self-lubricating bushings (2) Accessory Part ForBlast

This is the Traxxas Motor Heat Sink (Finned Aluminum) Finned aluminum heat sink helps reduce Stinger motor temperatures in the Blast boat. **Does not fit Stinger motors with water cooling jacket Accessory Part ForBlast