This is the Traxxas Center Differential kit (complete)The optional center differential transfers power to the front and rear differentials independently for smooth power delivery in rough conditions and maximum corner speed. The sealed differential can...

This is the Robinson Racing Extra Hard 19-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless,...

These are the RPM Blue Front Upper & Lower Suspension A-Arms for Traxxas 1/16 E-Revo and 1/16 Grave Digger trucks.Upon the release of the Traxxas 1/16th Scale Mini E-Revo, RPM immediately started receiving requests for durability upgrades. What...

This is the Replacement Complete Gear Set for the EZ Start 2 System. The EZ Start 2 system is used on the Traxxas T-Maxx 2.5. FEATURES:White plastic gears INCLUDES:Eight different gearsOne metal 4mm sleeveOne 5x12.5mm shaft REQUIRES:The remainder of the...

This is a set of two RDLogics Aluminum Rear Lower Suspension Arms (Orange) for the HPI Baja 5B buggy and 5T truck.  These are much stronger than the stock arms, and they look great.  We have all of the matching aluminum...

This is the Integy Silver Aluminum Pushrod Set for the Traxxas Revo 2.5, 3.3, E-Revo, and Summit trucks.  This includes four standard length 101mm suspension pushrods.  These are a direct replacement for the stock pushrods.

This is the E-Flite Tail Drive Shaft Lower Bearing Block and Mount for the Blade 400 helicopters.

This is a Traxxas Jato 2.5 and 3.3 Single Speed Conversion Kit.  This is the optional part used to convert the 2-speed transmission to a single speed.Includes:One single speed top shaftOne single speed primary gear(20/30T)One 5mm e-clipTwo...

This is the Primary Clutch Assembly for the Traxxas Nitro Jato Stadium Truck. FEATURES:Metal ConstructionSilver in color INCLUDES:One Primary Clutch Assembly REQUIRES:Assembly onto Vehicle

This is Traxxas Jato Replacement Brake Pad and Hardware Set.  This includes two aluminum brake pads, two 3x15mm socket head screws, C clip, pin, hub and spacer.  This will help get your truck stopping like it should again!  You may...

This is a Traxxas Jato 2.5 and 3.3 Fuel Tank Rebuild Kit.  This includes one fuel tank cap spring, one rubber tank gasket, one metal cap pin, and two rubber grommets.

This is a set of two (2) Traxxas Jato Front GTR Shock Springs with the 0.9 Orange Weight Rating.

This is a set of six Traxxas 4x4 Blue Aluminum Button-Head Screws for the Jato 2.5 and 3.3 trucks.

This is the Team Integy 54-Tooth Steel Spur Gear for the Traxxas Jato 2.5, 3.3, and T-Maxx 3.3 trucks.  This is MUCH stronger than a plastic spur gear.  The Integy spur gears feature color-coded rings to allow easy identification...

This is a Green Tension Shock Spring Set for the Revo GTR Shocks. These springs are installed on the shock bodies. FEATURES:Red in colorTan band on spring indicates 4.1 tension rating INCLUDES:Two 4.1 rear shock springs REQUIRES:Nothing.  These are...

This is a Traxxas 40mm Vented Steel Brake Disc for the Revo 2.5 and 3.3 trucks.  All items are brand new in the factory package, with the full manufacturer warranty.

This is the Spektrum AR10100T DSMX 10-Channel Telemetry Receiver The Spektrum AR10100T 10 Channel Receiver is a DSM2 and DSMX capable receiver with a compact footprint to fit in a wide range of aircraft. It features a full range telemetry, integrated...

This is the Spektrum AR8020T DSMX 8-Channel Telemetry Receiver The Spektrum AR8020T 8 Channel Receiver is a DSM2 and DSMX capable receiver with a compact footprint to fit in a wide range of aircraft. It features a full range telemetry, integrated...

This is the GPM Blue Precision Shock Absorber Shaft Core Manufactured with 4140 medium carbon steel and aluminium 7075, this shaft core is engineered to improve service life under high stress conditions. The section diameter is increased from 5.0mm to 7...

This is the Traxxas Gray Mini Chassis The 10722X chassis must be used with TRA10728X front upper and lower bulkheads. Not compatible with TRA10728 bulkhead.

This is the Racer's Edge Battery/ESC Adapter: Female TRX to Male EC3 This adapter allows a battery equipped with an EC3 connector to be used with a Traxxas ESC

This is the Traxxas Mini Rally VXL Ford RS200 Blue Body Is it time to replace the Ford RS200 body on your Mini Rally? This tough polycarbonate body features the hottest ProGraphix paint with pre-applied decals. Body comes complete and ready to mount with...

This is the Traxxas Mini Rally VXL Ford RS200 White Body Is it time to replace the Ford RS200 body on your Mini Rally? This tough polycarbonate body features the hottest ProGraphix paint with pre-applied decals. Body comes complete and ready to mount...

This is the Traxxas Mini Rally VXL Ford RS200 Black Decal Sheet Decal sheet for the Mini Rally VXL Ford RS200 body

This is the Traxxas Mini Slash 4X4 Decal Sheets Decal sheets for the for the Mini Slash 4X4 body

This is the Traxxas Mini XRT ProGraphix Body The ProGraphix Mini XRT body comes fully trimmed and ready to paint with decal sheets, window masking, body cage with integrated cooling vents, clipless body latches with hardware, and pre-applied overspray...

This is the Traxxas Mini XRT Orange Body Is it time to replace your Mini XRT body or upgrade to an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix paint with pre-applied decals. Mini XRT bodies come fully-trimmed and ready...

This is the Traxxas Mini XRT Green Body Is it time to replace your Mini XRT body or upgrade to an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix paint with pre-applied decals. Mini XRT bodies come fully-trimmed and ready to...

This is the Traxxas Mini XRT Red Body Is it time to replace your Mini XRT body or upgrade to an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix paint with pre-applied decals. Mini XRT bodies come fully-trimmed and ready to...

This is the Traxxas Mini XRT Blue Body Is it time to replace your Mini XRT body or upgrade to an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix paint with pre-applied decals. Mini XRT bodies come fully-trimmed and ready to...

This is the Traxxas Mini XRT Clear Body The clear Mini XRT body comes fully trimmed and ready to paint with decal sheets, window masking, body cage with integrated cooling vents, clipless body latches with hardware, and pre-applied overspray film. For...

This is the Traxxas Mini XRT ProGraphix Body The ProGraphix Mini XRT body comes fully trimmed and ready to paint with decal sheets, window masking, body cage, clipless body latches with hardware, and pre-applied overspray film. For best results, use...

This is the Traxxas Mini XRT Blue Body Is it time to replace your Mini XRT body or upgrade to an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix paint with pre-applied decals. Mini XRT bodies come fully-trimmed and...

This is the Traxxas Mini XRT Orange Body Is it time to replace your Mini XRT body or upgrade to an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix paint with pre-applied decals. Mini XRT bodies come fully-trimmed and...

This is the Traxxas Mini XRT Red Body Is it time to replace your Mini XRT body or upgrade to an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix paint with pre-applied decals. Mini XRT bodies come fully-trimmed and...

This is the Traxxas Mini XRT Green Body Is it time to replace your Mini XRT body or upgrade to an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix paint with pre-applied decals. Mini XRT bodies come fully-trimmed and...

This is the Traxxas Mini XRT Clear Body For #10712 Bodies The clear Mini XRT body comes fully trimmed and ready to paint with decal sheets, window masking, body cage, clipless body latches with hardware, and pre-applied overspray film. For best results,...

This is the Traxxas Mini XRT Body Conversion Kit Use this body conversion kit to allow your TRA10712-series Mini XRT body to use the TRA10785X LED light kit. The conversion kit includes a new cooling air vent for the roof skid and template to make the...

This is the Savox SW-0240MGP Waterproof 1/5 Scale High Voltage Digital Servo 0.15sec / 486oz @7.4V This is the Savox SW-0240MGP Waterproof 1/5 Scale High Voltage Digital Servo capable of 486 oz/in of torque @7.4V. The SW-0240MGP is a waterproof,...

This is the Hobbywing Xerun XR10 Justock G3S, JS4 13.5T G2.1 Motor Combo Best used for: 1/10, 1/12 On-road and Off-road Club competition and Normal Training. Features The timing has been permanently set to 0 degree. With the identical competition motor,...