This is the GPM Steel Pin for Driveshaft Assemblies 4x17.8mm - 2PCS Universal joint and dog bone connecting steel pin. The pin is suitable for the rebuild kit of the 7750X heavy-duty X-Maxx driveshaft. Replaces part # TRA7751X Accessory Part...

This is the Traxxas Inner Narrow Fenders for clipless TRX-6 Mercedes-Benz G 63 6x6 Replacement narrow inner fenders for clipless TRX-6 Mercedes-Benz G 63 6x6 with rock light covers and 2.5 x 6 mm screws (6). Replacement Part ForTRX-6 Mercedes-Benz G 63...

This is the Traxxas Steel Motor Shaft Spacer and E-Clip Steel motor shaft spacer and E-clip for Velineon 1200XL motor Replacement Part ForX-MaxxX-Maxx UltimateXRTXRT Ultimate

This is the Spektrum 14.8V 300mAh 4S 30C LiPo Battery Includes(1) Spektrum 4S 14.8V 300mAh 30C LiPo Battery SpecificationsApplication: AirplaneBattery Type: LiPo (3.7V per cell)Battery Voltage: 14.8VCapacity: 30CConnector Type: JST-RCYHard Case: NoNumber...

This is the Traxxas Gray GTM Shock Body (Molded Composite) (2) Replacement Part ForTRX-4MT 1/18 1979 Chevrolet K10 Monster TruckTRX-4MT 1/18 1979 Ford F-150 Monster TruckTRX-4M 1/18 1979 Chevrolet K10 High Trail EditionTRX-4M 1/18 1979 Ford F-150 High...

This is the Racers Edge Female Traxxas to Male Tamiya Connector Adapter This adapter allows a battery equipped with a Tamiya-style plug to be used with a Traxxas ESC.

This is the Traxxas Disruptor Boat Stand Replacement Boat Stand Replacement Part ForDisruptor

This is the Traxxas Hatch Nut Tool for Spartan SR and Disruptor Hatch nut tool for #10318 hatch nuts Replacement Part ForDisruptorSpartan SR

This is the Traxxas Spartan SR Pushrod Seal and Stuffing Tube Seal Replacement steering pushrod seal and stuffing tube seal Replacement Part ForSpartan SR

This is the Traxxas Spartan SR Battery Straps (325mm) (3) Set of three 325 mm hook-and-look battery straps Replacement Part ForSpartan SR

This is the Traxxas Hatch Wing Nuts Set of four replacement hatch wingnuts Replacement Part ForDisruptorSpartan SR

This is the Traxxas Disruptor Bow Eye Replacement Part ForDisruptor

This is the RC Screwz Traxxas Stampede XL5 2WD (36254-8) Stainless Steel Screw Kit. RCScrewZ Stainless Screw Kits are the best way to beef up the hardware throughout your RC vehicle in one convenient package. Your new kit will include everything needed...

This is the Traxxas Fuel Filler Bottle (500cc) The fuel bottle holds 500 cc of fuel and includes a long, bent, blue-anodized spout for easy filling. A rubber cap and O-ring seal make it possible to temporarily store fuel in the bottle (fuel bottles are...

This is the Pioneer Silicon Coated Lead Wires (140mm), Red & Black, Brass Ends Pioneer Spare Parts keep your car running at its best IncludesPioneer Silicon Coated Lead Wires (140mm), Red & Black, Brass Ends SpecificationsScale: 1/32

This is the Pioneer Silicon Coated Lead Wires (160mm), Red & Black, Brass Ends Pioneer Spare Parts keep your car running at its best IncludesPioneer Silicon Coated Lead Wires (160mm), Red & Black, Brass Ends SpecificationsScale: 1/32

This is the Pioneer Capacitor 10nF (Yellow Disc Ceramic) (10) Pioneer Spare Parts keep your car running at its best Includes(10) Pioneer Capacitor 10nF (Yellow Disc Ceramic) SpecificationsScale: 1/32

This is the Pioneer Legends Racers Complete 'PURE POWER' Wiring Loom Complete solder-in part including 222AWG Silicone coated wires with tinned ends, brass pick-ups and ferrite noise suppression filters. FeaturesReplacement wiring loom for the Pioneer...

This is the Pioneer Silicon Coated Lead Wires, Red & Black, Plain Premium quality 222AWG Silicone coated wires with stripped back, tinned ends, ready to solder in place. FeaturesLength = 160mm (6.5 inch), 2 pairs, Red & Black.Fits most slot cars...

This is the Pioneer Complete Wiring Loom (Mustang/Charger/Camaro) Complete solder-in part including 222AWG Silicone coated wires with tinned ends, brass pick-ups and ferrite noise suppression filters. FeaturesReplacement wiring loom for the Pioneer...

This is the Traxxas LED Lights Wire Harness Extension Use this wire harness extension to instal #10349 LED lights in the #10350 boat trailer. Accessory Part ForTraxxas Boat Trailer

This is the Traxxas Pro Scale Winch Wire Extension Harness Use the wire extension harness when installing the Pro Scale winch in the #10350 boat trailer Accessory Part ForTraxxas Boat Trailer

This is the RPM ESC Cage for the Castle Cobra 8 ESC and ARRMA 6S Vehicles RPM's ESC Cage for the Castle Cobra 8 ESC provides a solid, positive mount to keep your new and valuable ESC in place even under the most extreme circumstances. Features Solid...

This is the RPM ESC Cage for the Castle Cobra 8 ESC and Traxxas Vehicles The RPM ESC Cage for the Castle Cobra 8 ESC for Traxxas vehicles provides a solid, positive mount. A locked in mount keeps your new and valuable ESC in place even under the most...

This is the Castle Creations ESC Cooling Replacement Fan for the Mamba X and Cobra 8 ESCs. Keep one on hand, especially if you are hitting the trails! Installation Instructions:1. Unplug the fan from the ESC.2. Locate the four screws on top of the ESC.3...

This is the Traxxas TRX-4m Shock Mounts (Front & Rear) and Extended Trailer Hitch Replacement shock mounts and extended trailer hitch for 9851 TRX-4M Long Arm Lift Kit. Includes: Hardware Replacement Part ForTRX-4M 1/18 1979 Chevrolet K10 High Trail...

This is the Traxxas Replacement Gear Covers (3)    Replacement Part ForXRT  

This is the Traxxas Black Front & Rear Camber link set (Plastic/ Non-Adjustable) Replacement non-adjustable camber link set includes front and rear plastic links Replacement Part ForBIGFOOT 4X4 BrushlessRustler 4X4 BrushlessSlash 4X4...

This is the Traxxas Rear Springs (2) Pair of white springs for rear Ultra Shocks Accessory Part ForRustler 4x4Slash 4x4

This is the Traxxas Racing Sponsors Decal Sheet Dress up your model’s body with the Traxxas Racing Sponsor Decal Sheet. The decal sheet includes over 25 different full-scale sponsors including, NOS, K&N, Mechanix Wear, Holley, and Hooker...

This is the Traxxas Screw, 3x20 countersunk machine (hex drive) (6) Set of six 3x20 mm countersunk machine screws with hex-drive heads Replacement Part ForX-Maxx

This is the Traxxas Communication link, telemetry expander The communication link connects your Traxxas 6533 TSM receiver to the optional Telemetry Expander Module 2.0. Accessory Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLChevrolet...

This is the Traxxas Basic Tool set Basic tool set includes 1.5 mm, 2.0 mm, and 2.5 mm hex wrenches, 4-way wrench, 8 mm & 4 mm combo wrench, and U-joint wrench. Includes 1.5mm Hex Wrench2.0mm Hex Wrench2.5mm Hex Wrench4-Way Wrench8mm & 4mm...

This is the Traxxas Premium Speed Bit Handle (Rubber Overmold) The premium speed bit handle holds bits securely with an overmolded rubber grip to provide excellent comfort and more wrenching torque.

This is the Traxxas Speed Bit Handle Medium (One Piece) The medium speed bit handle holds bits securely with excellent hand comfort and more wrenching torque.

This is the Traxxas Body Ultra Shock (XXL) (Grey) (2) XX-Long Ultra Shock composite bodies (2) Replacement Part ForBandit VXLBanditDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0Ford F-150 RaptorFord F-150 Raptor R 4X4Ford Fiesta ST...

This is the Traxxas Body Ultra Shock (Long) (Grey) (2) Long Ultra Shock composite bodies (2) Replacement Part ForBandit VXLBanditDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0Ford F-150 RaptorFord F-150 Raptor R 4X4Ford Fiesta ST...

This is the Traxxas Aluminum Shock Caps (2) (Big Bore Shocks) Replacement aluminum shock caps for Traxxas Big Bore shocks. (2) Caps do not fit Ultra Shocks. Accessory Part ForDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0Ford F-150...

This is the Traxxas Big Bore Shock Cylinder (Long) (1) Replacement long aluminum shock cylinder for Traxxas Big Bore Shocks. Accessory Part ForBandit VXLBanditBIGFOOT No. 1 Officially Licensed ReplicaDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford...

This is the Traxxas Spinning Carousel Rack Organize your shock oil in this spinning carousel rack. The carousel rides on bearings for smooth spinning action.